Domoticz

Posted: **Tuesday 27 February 2018 16:43**

Hello,

I have problem with my Aeotec ZW075 Smart Switch Gen5+, I keep getting this in the log

2018-02-26 23:52:11.095 Error, Node015, ERROR: Dropping command, expected response not received after 1 attempt(s)
2018-02-26 23:52:11.096 Always, 
2018-02-26 23:52:11.096 Always, Dumping queued log messages
2018-02-26 23:52:11.096 Always, 
2018-02-26 23:52:11.097 Always, 
2018-02-26 23:52:11.097 Always, End of queued log message dump

I have tried to remove and add it again, it worked for few min then it started to drop

I'm running version 3.8968

Posted: **Saturday 12 May 2018 8:54**

I have this problem again.

I also see this in the log

Code: Select all

2018-05-12 08:51:07.665 OpenZWave: Received Node Dead notification from HomeID: 3260666225, NodeID: 15 (0x0f)

I'm running 3.9424

Posted: **Sunday 21 April 2019 21:21**

Hi, is your plug working correctly?

I am having problem to get the Watt/kWh report to be excepted by DZ.

I get this in the log

"OpenZWave: Value_Added: Node: 21 (0x15), CommandClass: METER, Label: Unknown, Instance: 1"

Domoticz

Problem with Aeotec ZW075 Smart Switch Gen5+

Problem with Aeotec ZW075 Smart Switch Gen5+

Re: Problem with Aeotec ZW075 Smart Switch Gen5+

Re: Problem with Aeotec ZW075 Smart Switch Gen5+