Hi all,
One of my rad valves is over-reading , but only when the radiator is on.
I want to somehow input data from a 433mhz thermometer into the evohome system so Evohome takes that reading, rather than the thermometer on the rad valve.
I have all this connected via domoticz.
Is what i want to do achievable?
Cheers
Stuart
Evohome - using a separate thermometer over a rad valve
Moderator: leecollings
-
stuiow
- Posts: 139
- Joined: Saturday 18 April 2015 18:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.6857
- Location: Isle of Wight, United Kingdom.
- Contact:
Evohome - using a separate thermometer over a rad valve
Now setup on a RPI3.
Also using Evohome HGI80, RFXTRX433E and a Aeotec Gen5 stick. Mainly a Gen5 Z-Wave system.
My weather (Davis vantage Pro2) data is obtained by weatherunderground
Now collecting rtl_433 data from Apollo Ultrasonic meter
Also using Evohome HGI80, RFXTRX433E and a Aeotec Gen5 stick. Mainly a Gen5 Z-Wave system.
My weather (Davis vantage Pro2) data is obtained by weatherunderground
Now collecting rtl_433 data from Apollo Ultrasonic meter
Who is online
Users browsing this forum: No registered users and 1 guest