Domoticz

Hello,

Today I installed my RFXtrx433E with domoticz at a raspberry pi.
I updated the firmware to version RFXtrx433_Ext_1016.hex (RFXtrx433_Ext2_firmware).

After the update I tried to install some remote klik-aan-klik-uit bought by the action.
Domoticz receives the signal from the remote, but when I try to switch the remote with domoticz It won't work.
It looks like Rfxcom won't send any signal..

Could anyone help me to recognize what's going wrong?

Which module, Action never sold KlikAanKlikUit.

Action has sold these modules:
- Impuls (controlled by a Domoticz Impuls device)
- Eurodomest (controlled by a Domoticz ARC device)
- PROmax (controlled by a Domoticz IT device)
- Flamingo Smartwares SF501 (controlled/received as a Domoticz AC device)

Thnx voor your replay!

I tried the impuls switches, but I understand that they are really hard to connect with domoticz. So first I tried to connect the ProMax switches. Domoticz recognized the signal form the remote, but when I try to switch from the software I doesn"t work.

The PROmax remote is not received as IT device by the RFXtrx. The PROmax is controlled by a Domoticz IT device.

Create the IT device in Domoticz and select a random ID-unit, put the module in learning mode and click the TEST button.

I tried but the Promax won't listen, it stays at the learning modus.

please contact support rfxcom.com

It's working!

I noticed that there was a problem with the firmware version, domoticz didn't update the firmware correctly.
A few minutes ago I tried again and I fixed it, thank your very much for your help

For the Promax switch read viewtopic.php?f=44&t=10228&p=81514#p81514