Domoticz

Hi all..

I received an RGB and a White Milight/Easybulb bulb today and tried to pair them both, with 50/50 results.

The RGB bulb has paired absolutely fine using the instructions given here -http://www.nemcon.nl/blog2/faq

The white bulb will not work though, i just cannot get it to respond/pair with my RFLink. I've even moved my RFLink to within a few meters just to make sure its not the range.

I'm using the standard command "10;MiLightv1;F746;01;34BC;PAIR;" as instructed. (I paired my RGB with 10;MiLightv1;F001;01;34BC;PAIR; so the ID is different)

Does the white bulb need a different string to pair? DOes "34BC" need changing to something else? I cannot find any info on google


Any help would be great please!

Thanks.

After reading into it more, "34BC" is the colour it sends to the bulb. So i thought maybe the White bulb is failing when its receiving a colour signal when pairing...

So, i set my working RGB bulb to white light and checked the domoticz log.. It shows the command sent as -
10;MiLightv1;F001;01;0000;ON;

I then tried sending 10;MiLightv1;F003;01;0000;PAIR; as the pairing command to my white bulb making sure the colour was 0000 (white).

It still won't pair I even saw a mention of MiLightV2 on domoticz github in the riflink code and thought i'd tried that. Still nothing..

I have no idea whats going on =/

Are these Dual White lights just not compatible?

Thats normal.. only the RGBW bulbs and remotes were supported with R42.
In R43 also the CW/WW and RGB bulbs and remotes are supported.

Ah, at least I know it's not me then haha.

Thanks!

Sent from my SM-G930F using Tapatalk

same problem here rgbww and rgbw works fine

but cant pair cw ww bulb
it does not respond at all

to below


10;MiLightv1;5A8296;02;0000;PAIR;
10;MiLightv1;5A8294;01;0000;PAIR;

domotics v3 8025 with rflink r46

anybody any idea

according to the rflink site cw/ww should be supported

WHat is the milight FUT number?

where can i find those numbers ?
there are no model numbers on the light only milight cw/ww

sadly i dont have a white remote else i would have made you a data capture
anybody have a milight cw/ww buld and a white remote that can capture some data on rflink ?

its the FUT017 bulb

Hi Guys

I'm now running version 47 of the Milight firmware but am still unable to get my FUT035 LED strip controller to pair, I am using the 'A' set of instructions from the Milight FAQ on the Nodo site.

I can get it to pair and unpair to a milight remote just fine and I also have an older model Milight strip controller that works perfectly with my RFLink.

Any advice?

Hi, I have the same problem .. I can not control with domoticz FUT019. I tried everything. Other drivers strips work without problems. Please help ..