Domoticz

Hi Folks,

I bought myself a Qubino ZMNHZD1 Weather station. https://www.momotica.nl/Domotica/zwave/ ... -Wave-Plus
This weatherstation sends its 433 mhz signals to a z-wave stick.
I am recieving the 433 mhz perfectly with my rfxcom and the station is well included in z-wave. but I don't get devices in z-wave.
At startup I get this for node 44 which is the weather station.
Anyone any idea?

2016-07-11 08:47:32.206 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR BINARY, Label: Sensor, Instance: 0

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Temperature, Instance: 1

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Direction, Instance: 7

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Unhandled Label: Direction, Unit:

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Velocity, Instance: 6

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Velocity, Instance: 6

2016-07-11 08:47:32.207 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Temperature, Instance: 5

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Temperature, Instance: 6

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Rain Rate, Instance: 12

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Unhandled Label: Rain Rate, Unit: mm/h

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Relative Humidity, Instance: 5

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Temperature, Instance: 9

2016-07-11 08:47:32.208 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: SENSOR MULTILEVEL, Label: Relative Humidity, Instance: 5

2016-07-11 08:47:32.210 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 1

2016-07-11 08:47:32.210 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 2

2016-07-11 08:47:32.210 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 3

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 4

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 5

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 6

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 7

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 8

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 9

2016-07-11 08:47:32.211 OpenZWave: Value_Added: Node: 44 (0x2c), CommandClass: BATTERY, Label: Battery Level, Instance: 10

2016-07-11 08:47:32.225 RFXCOM: Using serial port: /dev/ttyUSB0

Thnx in advance for any help

Jan

anyone any idea?

What is the point in "converting" from 433mhz to z-wave ? If rfxcom knows the Qubino protocol you can skip the z-wave part.

because I want to skip my rfxcom

Hi,
Have you been able to get it to work? I also have some problems with this.
see viewtopic.php?f=12&t=12813&p=91862&hilit=ZMNHZDx#p91862

Hi There,

I still get all the values by rfxcom but nothing from z-wave.

I get som sensor values after updating the openZWave configuration files, but not all...

I hade problem with my Qubino(not weather station), I removed and added the node for it and got my to work.

@Varazir, could you please post you configuration deta regarding this node. What is defined in zwcfg?????.xml file for this node.

tdv94lnn wrote:@Varazir, could you please post you configuration deta regarding this node. What is defined in zwcfg?????.xml file for this node.

I have a ZMNHOD1 not ZMNHZD1. As I said I just re added the device to zwave it started to work.

Hi there,

Has anyone made any progress on recieving the data via z-wave on this weatherstation?

Grtz. Jan

No one to report any progress?

I registered to this forum as a non-Domoticz user (have tested it a while ago though and use it sometimes for device testing as well).

I am trying to the Qubino Weather Station ZMNHZD1 on Indigo Domotics (with Aeon Labs Z-Wave USB stick, not the new Gen5 stick though) and I experience the same problems there, i.e the Z-Wave dongle for the weather station does not seem to transmit out sensor data for the temp/humidity sensor channel 2, rain sensor and wind sensor.
I can see on the dongle that it does indeed receive data from the sensors but somehow it does not transmit it further on to the Z-Wave controller.

I am not sure if this is a firmware bug or that the dongle transmits its Z-Wave data in wrong way or that the device specifications/command classes are not following the documentation. (See my thread in the Indigo forum at http://forums.indigodomo.com/viewtopic.php?f=58&t=16262).

I tested also with Z-Way Server on Windows together with the Z-Wave.ME UZB stick and same problems there.
Looking in Vera forums it seems that this weather station is not compatible with Vera either.

My dongle seems to have firmware 1.02.

I have emailed Qubino support but no repsonse yet.

Alright, I compiled OpenZWave library 1.4.2268 and used OpenZWave Control Panel on my Ubuntu 14.04 LTS test machine.
No issue to include/add the device to my controller ZWave.ME UZB1 stick (firmware 5.06).

After a few minutes I started to get updates from all 10 sensors/endpoints so the ZMNHZDx device is working as it should.

Hello,

I've bought the same weatherstation and experience the same problems like JuanUil reported.
I have this station now already a couple of months but can't get it working in my z-wave network.
Here I read Jan was able to get it communicating via RFXCOM. I'd like to know what protocols need
to be enabled to start the communication between the sensors and RFXCOM.
Currently I have only AC and Oregon OWL enabled in the RFXtrx433 device.

Greetings,
Joris

Hi I have,

Blind T1/T2/T3/T4
Oregon scientific
AC
ARC
X10
enabled, succes!!
Jan

Is fully supported in OpenHAB2 and works really well. To bad that Domoticz doesnt support it yet

An old post but since I am completely reconfiguring my Domoticz I was wondering if this weatherstation is now supported with Domoticz.

Anyone succeeded?

Jan