Domoticz

Posted: **Monday 27 June 2016 8:43**

Hello,

I want use the gr-105n turn valves

Here the log when the hardware was added into Z-Wave network :

2016-05-05 10:58:10.164 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: SWITCH BINARY, Label: Switch, Instance: 1
2016-05-05 10:58:10.164 (ZWave) Light/Switch (Switch)
2016-05-05 10:58:10.743 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: SWITCH MULTILEVEL, Label: Level, Instance: 1
2016-05-05 10:58:10.743 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: SWITCH MULTILEVEL, Label: Bright, Instance: 1
2016-05-05 10:58:10.743 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: SWITCH MULTILEVEL, Label: Dim, Instance: 1

When I click on the Switch, I can see this in log :

Code: Select all

2016-05-05 10:59:45.897 User: Admin initiated a switch command
2016-05-05 10:59:45.897 OpenZWave: Domoticz has send a Switch command!, Level: 255, NodeID: 23 (0x17)
2016-05-05 10:59:45.897 (ZWave) Light/Switch (Switch eau)
2016-05-05 10:59:55.945 OpenZWave: Received timeout notification from HomeID: 4104505456, NodeID: 23 (0x17)

If I tried in the OpenZWave Control Panel, its work but not in Domoticz.

I use Domoticz V3.5274 with OpenZWave USB 1.4-307-g5c6f984-dirty

Can you help me ?

Thank in advance

Posted: **Monday 22 August 2016 13:30**

It's OK. Thk to all

FYI : https://github.com/OpenZWave/open-zwave/pull/936

Posted: **Saturday 12 May 2018 17:08**

hi narfight, i have the same problem, i have a dome valve is like the gr105n valve, this valve works in the panel openzwave but not in domoticz, can you help me?, do you solve the problem?

Domoticz

gr-105n work in OpenZWave Control Panel but not in Domoticz

gr-105n work in OpenZWave Control Panel but not in Domoticz

Re: gr-105n work in OpenZWave Control Panel but not in Domoticz

Re: gr-105n work in OpenZWave Control Panel but not in Domoticz