Domoticz

Posted: **Tuesday 15 March 2016 17:10**

Hi,

Last week, I added 2 Qubino ZMNHCD1 (ZWave+ Flush shutter) to my ZWave network without difficulties. Both devices seems to work well except they don't report their statuses, but fortunately there is a workarround thanks to forum users Egrerius and jvdz.

However, everytime I send a command manually or by script to these devices, I see these messages in the Domoticz log file:

Code: Select all

2016-03-15 07:20:00.222  EventSystem: Script event triggered: /usr/local/domoticz/var/scripts/lua/script_time_rolluikopen03.lua
2016-03-15 07:20:00.734  Activating Scene/Group: [Rolluiken_Voor]
2016-03-15 07:20:00.735  Activating Scene/Group Device: Rolluik_Living_Voor (On)
2016-03-15 07:20:00.736  OpenZWave: Domoticz has send a Switch command!, Level: 99, NodeID: 2 (0x02)
2016-03-15 07:20:00.737  (ZWaveStick) Light/Switch (Rolluik_Living_Voor)
2016-03-15 07:20:00.813  (ZWaveStick) Light/Switch (Rolluik_Living_Voor)
2016-03-15 07:20:00.825  Activating Scene/Group Device: Rolluik_Bureel_Links (On)
2016-03-15 07:20:00.825  Delaying switch [Rolluik_Bureel_Links] action (Set Level) for 2 seconds
2016-03-15 07:20:00.886  Activating Scene/Group Device: Rolluik_Bureel_Rechts (On)
2016-03-15 07:20:00.886  Delaying switch [Rolluik_Bureel_Rechts] action (Set Level) for 4 seconds
2016-03-15 07:20:02.284  (ZWaveStick) Usage (Unknown)
2016-03-15 07:20:02.286  (ZWaveStick) Usage (Power Meter)
2016-03-15 07:20:02.963  OpenZWave: Domoticz has send a Switch command!, Level: 99, NodeID: 5 (0x05)
2016-03-15 07:20:02.964  (ZWaveStick) Light/Switch (Rolluik_Bureel_Links)
2016-03-15 07:20:03.054  (ZWaveStick) Light/Switch (Rolluik_Bureel_Links)
2016-03-15 07:20:03.983  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh05.sh
2016-03-15 07:20:15.152  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh05.sh
2016-03-15 07:20:20.654  (ZWaveStick) Usage (Unknown)
2016-03-15 07:20:20.655  (ZWaveStick) Usage (Power Meter)
2016-03-15 07:20:22.584  (ZWaveStick) Light/Switch (Rolluik_Living_Voor)
2016-03-15 07:20:22.605  (ZWaveStick) Usage (Unknown)
2016-03-15 07:20:22.606  (ZWaveStick) Usage (Power Meter)
2016-03-15 07:20:23.444  (ZWaveStick) Light/Switch (Rolluik_Bureel_Links)
2016-03-15 07:20:24.453 Error, Node005, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_SWITCH_MULTILEVEL endpoint 1
2016-03-15 07:20:24.633 Always, 
2016-03-15 07:20:24.633 Always, Dumping queued log messages
2016-03-15 07:20:24.634 Always, 
2016-03-15 07:20:24.634 Always, 
2016-03-15 07:20:24.634 Always, End of queued log message dump
2016-03-15 07:20:24.634 Always, 
2016-03-15 07:20:26.533  OpenZWave: Domoticz has send a Switch command!, Level: 99, NodeID: 6 (0x06)
2016-03-15 07:20:26.534  (ZWaveStick) Light/Switch (Rolluik_Bureel_Rechts)
2016-03-15 07:20:26.565  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh05.sh
2016-03-15 07:20:26.624  (ZWaveStick) Light/Switch (Rolluik_Bureel_Rechts)
2016-03-15 07:20:37.894  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh06.sh
2016-03-15 07:20:47.393  (ZWaveStick) Light/Switch (Rolluik_Bureel_Rechts)
2016-03-15 07:20:48.220  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh06.sh
2016-03-15 07:20:48.403 Error, Node006, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_SWITCH_MULTILEVEL endpoint 1
2016-03-15 07:20:48.403 Always, 
2016-03-15 07:20:48.403 Always, Dumping queued log messages
2016-03-15 07:20:48.403 Always, 
2016-03-15 07:20:48.404 Always, 
2016-03-15 07:20:48.404 Always, End of queued log message dump
2016-03-15 07:20:48.404 Always, 
2016-03-15 07:20:59.563  Executing script: /volume1/@appstore/domoticz/var/scripts/refresh/refresh06.sh

I already have removed my zwcfg_xxxxxx.xml file and restarted Domoticz and I've tried to exclude and reinclude the devices but no luck.

I also tried user gizmocuz advice without change:

could you goto the openzwave setup, then from the dropdown groups/network
make sure only node 1 is in group 1/2/3

Is there anything else I can do?

I'm on Synology DS213, Aeon Labs USB Z-Stick Gen5, Domoticz V3.4834/OpenZWave 1.4.77 (http://www.jadahl.com/)

Posted: **Tuesday 15 March 2016 17:33**

I don't see those errors. Could be that I removed the Endpoint mapping from the XML before including. Can't remember that.
In the groups I only have node 1 in group 1, nothing else.

Posted: **Tuesday 15 March 2016 18:39**

it is an OZW error

Posted: **Wednesday 16 March 2016 10:39**

Ok guys, thanks for your quick responses.
I deleted node 1 from group 2 and 3 but that didn't make any difference, the error messages are still there. Thanks anyway!

Posted: **Monday 18 April 2016 15:01**

First I did an upgrade to beta v3.0.5070-7 with OZW v1.4.167. Then I deleted the line with <CommandClass id="96" mapping="endpoints" /> in the configuration file ZMNHCDx.xml and all error messages are gone.

Additional good news is that both Qubino modules now report their status correctly without the use of any scripts.

Domoticz

Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)

Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)

Re: Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)

Re: Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)

Re: Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)

Re: Cannot find endpoint map (Qubino ZMNHCD1 Flush shutter)