Domoticz

getget wrote: ↑Wednesday 07 February 2018 14:18 Hello, today, no 404
l have blinds defined in domoticz. What should I say to open them ?
When I say "ouvre le velux" (open the blind called velux in french) Google says "ok J'allume la lumière velux" (ok I turn on the light velux" ans the blind .... Closes.

Madgeni wrote: ↑Wednesday 07 February 2018 14:34 do you have devices in a Room Plan in your Domoticz?

willumpie82 wrote: ↑Wednesday 07 February 2018 16:12

Madgeni wrote: ↑Wednesday 07 February 2018 14:34 do you have devices in a Room Plan in your Domoticz?

I do have multiple room plans, is there a specific room plan required?

willumpie82 wrote: ↑Wednesday 07 February 2018 14:33 hi, thanks for creating this great initiative!

I did al the steps but i can't get it to work:
- Created a controlicz user with user rights and device sharing enabled => OK ??
- Domain is available via SSH domoticz.*****.nl can login with my admin account and controlicz account => OK
- From the controlicz page, the test succeeds when i click the test connection button => OK
- Google Home app display's the "[test] controlicz" instance when adding new device => OK
- when adding i got a prompt to login ( I login with my Controlicz page credentialz) => OK
- pop-up page for allow/deny connectoin => OK
- when G-Home is linking [test] controlicz => ERROR, couldn't update settings
==> when i use the test credentials listed on you G-project-page it succesfully adds the controls.

What am I doing wrong?

Madgeni wrote: ↑Wednesday 07 February 2018 17:28
check your SSL port is correct in Controlicz - oh and that the username/password you've given Controlicz can access your Domoticz instance

Madgeni wrote: ↑Wednesday 07 February 2018 20:24 ok, so have you now tried

Google Home app display's the "[test] controlicz" instance when adding new device?

willumpie82 wrote: ↑Thursday 08 February 2018 8:12

Madgeni wrote: ↑Wednesday 07 February 2018 20:24 ok, so have you now tried

Google Home app display's the "[test] controlicz" instance when adding new device?

yep, and after that i get a login prompt, with which i login with my controlicz website credentials, followed by an accept/deny screen, when accepted i'm brought back to G-home app, and that follows with a "can't configure, check connection error".

Fred78 wrote: ↑Wednesday 07 February 2018 15:27

getget wrote: ↑Wednesday 07 February 2018 14:18 Hello, today, no 404
l have blinds defined in domoticz. What should I say to open them ?
When I say "ouvre le velux" (open the blind called velux in french) Google says "ok J'allume la lumière velux" (ok I turn on the light velux" ans the blind .... Closes.

Hmmm...funny. Because when I say "Ouvre le volet du salon", it works fine. I mean it says "ok j'allume la lumière volet du salon" and it opens the shutter.
What kind of device are you using for you're blinds? My shutter is managed by a Qubino Zwave module that is recognized by domoticz as a dimmer.

michel30 wrote: ↑Friday 09 February 2018 14:53 Hello,

I was checking the site controlicz and I have a question for sign up:

Signup to Controlicz

Username or Email : Okay this clear I enter my email adress in.


Password : what password do you need? because is strange if you need my email adress password.


domoticz.host.net : For this I need to create an DNS server that will connect to my domoticz?


443 : okay, this is clear open the port to my domoticz.


controlicz_user : must I create the same user name on my domoticz?


controlicz_password : Enter the password from my domoticz with the user what I add above.

Regards,
Michel

mark.sellwood wrote: ↑Saturday 30 December 2017 19:54 Hi, My Google Home has stopped connecting to my Domoticz, when I ask Google to sync devices i get "Sorry an error occurred syncing Controlicz" When I look at my firewall logs I don't see any incoming connections. If I go to https://www.controlicz.com login and click "Test connection to your Domoticz" this passes and I see an incoming connection on my firewall from an Amazon IP address.
Is something broken?

Madgeni wrote: ↑Saturday 10 February 2018 11:55 Can you disable and reenable the test in the simulation?