Domoticz

deennoo wrote:Just test on debian, Domoticz looks lib at

Code: Select all

/usr/local/lib/python3.4/dist-packages/

this mean you need to install python who is used for domoticz

Code: Select all

sudo apt-get install python3-pip libglib2.0-dev
sudo pip3 install Crypto 
sudo pip3 install broadlink

When done, you have to copy lib on the good dir :

Code: Select all

sudo cp -r /usr/local/lib/python3.4/dist-packages/Crypto/ /usr/lib/python3.4/
sudo cp -r /usr/local/lib/python3.4/dist-packages/broadlink /usr/lib/python3.4/

Then restart domoticz en enjoy !

Code: Select all

sudo service domoticz restart

@zak45 maybe you can update your wiki with this thank you for this great plugin !

when did you release the one for Orange Box ? ahrd to transforme to freebox revolution ?

sudo apt-get install python3-pip libglib2.0-dev
sudo pip3 install Crypto 

sudo pip3 install broadlink

sudo pip3 install broadlink     Downloading/unpacking broadlink
  Downloading broadlink-0.4.tar.gz
  Running setup.py (path:/tmp/pip-build-8kfdo1wo/broadlink/setup.py) egg_info for package broadlink
    Traceback (most recent call last):
      File "<string>", line 17, in <module>
      File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12
        except ImportError, e:
                          ^
    SyntaxError: invalid syntax
    Complete output from command python setup.py egg_info:
    Traceback (most recent call last):

  File "<string>", line 17, in <module>

  File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12

    except ImportError, e:

                      ^

SyntaxError: invalid syntax

----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in /tmp/pip-build-8kfdo1wo/broadlink
Storing debug log for failure in /root/.pip/pip.log

I receive the following error:

CODE: SELECT ALL
sudo pip3 install broadlink Downloading/unpacking broadlink
Downloading broadlink-0.4.tar.gz
Running setup.py (path:/tmp/pip-build-8kfdo1wo/broadlink/setup.py) egg_info for package broadlink
Traceback (most recent call last):
File "<string>", line 17, in <module>
File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12
except ImportError, e:
^
SyntaxError: invalid syntax
Complete output from command python setup.py egg_info:
Traceback (most recent call last):

File "<string>", line 17, in <module>

File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12

except ImportError, e:

^

SyntaxError: invalid syntax

----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in /tmp/pip-build-8kfdo1wo/broadlink
Storing debug log for failure in /root/.pip/pip.log

zak45 wrote:Hi,
there is no way to do that in oneshot for all devices.
On the next release, you should be able to put device off by using Domoticz param:

Capture.JPG

plaaggeest wrote:
Hi,

Code: Select all

sudo apt-get install python3-pip libglib2.0-dev
sudo pip3 install Crypto 

runs without any problems, but when I perform

Code: Select all

sudo pip3 install broadlink

I receive the following error:

Code: Select all

sudo pip3 install broadlink Downloading/unpacking broadlink
 Downloading broadlink-0.4.tar.gz
 Running setup.py (path:/tmp/pip-build-8kfdo1wo/broadlink/setup.py) egg_info for package broadlink
 Traceback (most recent call last):
 File "<string>", line 17, in <module>
 File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12
 except ImportError, e:
 ^
 SyntaxError: invalid syntax
 Complete output from command python setup.py egg_info:
 Traceback (most recent call last):

 File "<string>", line 17, in <module>

 File "/tmp/pip-build-8kfdo1wo/broadlink/setup.py", line 12

 except ImportError, e:

 ^

SyntaxError: invalid syntax

----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in /tmp/pip-build-8kfdo1wo/broadlink
Storing debug log for failure in /root/.pip/pip.log

I am a noob and cant tell what the issue is. Some able to help me out?

zak45 wrote:This is not due to python version but to broadlink version. Actual version 0.4 had compatibility problem, hope should be solved soon.
in the meantime, see there:
https://www.domoticz.com/forum/viewtopi ... 4&start=20

2017-04-28 12:52:28.495 Error: (BroadlinkRM2) failed to load 'plugin.py', Python Path used was '/home/pi/domoticz/plugins/BroadlinkRM2/:/usr/local/lib/python35.zip:/usr/local/lib/python3.5/:/usr/local/lib/python3.5/plat-linux:/usr/local/lib/python3.5/lib-dynload'.
2017-04-28 12:52:28.495 Error: (Broadlink) Module Import failed, exception: 'ImportError'
2017-04-28 12:52:28.495 Error: (Broadlink) Module Import failed: ' Name: broadlink'
2017-04-28 12:52:40.754 Hardware Monitor: Fetching data (System sensors)
2017-04-28 12:52:46.349 (Nest) Thermostat (Thermostaat)
2017-04-28 12:52:46.350 (Nest) Temp + Humidity (Beneden)
2017-04-28 12:53:10.790 Hardware Monitor: Fetching data (System sensors)
2017-04-28 12:53:16.924 (Nest) Thermostat (Thermostaat)
2017-04-28 12:53:16.926 (Nest) Temp + Humidity (Beneden)
2017-04-28 12:53:21.504 (433 Receiver) Temp + Humidity (Boven)
2017-04-28 12:53:30.239 Error: Broadlink hardware (13) thread seems to have ended unexpectedly

plaaggeest wrote:

zak45 wrote:This is not due to python version but to broadlink version. Actual version 0.4 had compatibility problem, hope should be solved soon.
in the meantime, see there:
https://www.domoticz.com/forum/viewtopi ... 4&start=20

Alright, got the broadlink installed via above comment. Thank you!

Copied the plugin files to the created folder.

Created the Broadlink Hardware with IP+Mac. But still have python issues:

Code: Select all

2017-04-28 12:52:28.495 Error: (BroadlinkRM2) failed to load 'plugin.py', Python Path used was '/home/pi/domoticz/plugins/BroadlinkRM2/:/usr/local/lib/python35.zip:/usr/local/lib/python3.5/:/usr/local/lib/python3.5/plat-linux:/usr/local/lib/python3.5/lib-dynload'.
2017-04-28 12:52:28.495 Error: (Broadlink) Module Import failed, exception: 'ImportError'
2017-04-28 12:52:28.495 Error: (Broadlink) Module Import failed: ' Name: broadlink'
2017-04-28 12:52:40.754 Hardware Monitor: Fetching data (System sensors)
2017-04-28 12:52:46.349 (Nest) Thermostat (Thermostaat)
2017-04-28 12:52:46.350 (Nest) Temp + Humidity (Beneden)
2017-04-28 12:53:10.790 Hardware Monitor: Fetching data (System sensors)
2017-04-28 12:53:16.924 (Nest) Thermostat (Thermostaat)
2017-04-28 12:53:16.926 (Nest) Temp + Humidity (Beneden)
2017-04-28 12:53:21.504 (433 Receiver) Temp + Humidity (Boven)
2017-04-28 12:53:30.239 Error: Broadlink hardware (13) thread seems to have ended unexpectedly

Any ideas what this could be?

zak45 wrote:
maybe this :

sudo cp -r /usr/local/lib/python3.4/dist-packages/broadlink /usr/lib/python3.4/

you need to adapt to your configuration

lonwan wrote:

zak45 wrote:
maybe this :

sudo cp -r /usr/local/lib/python3.4/dist-packages/broadlink /usr/lib/python3.4/

you need to adapt to your configuration

Made on your last post, installed version 0.3 (Successfully installed broadlink-0.3 pycrypto-2.6.1), but in the directory /usr/local/lib/python3.4/dist-packages/ there is no broadlink folder
As a result, I again have a snag. What am I doing wrong?

zak45 wrote: do you have mixed python version i.e 2.7.x & 3.x ?

lonwan wrote:

zak45 wrote: do you have mixed python version i.e 2.7.x & 3.x ?

yes, 2.7 and 3.4, and I tried to install 3.5.
What can I do to make it work?

zak45 wrote: your default python env should be 2.7, this made problem.
you should use pip3 command for each installation.

Spoiler: show

I use pip3 command, But the folder "broadlink" appears in the /usr/local/lib/python3.5/site-packages.
I copied the folder "broadlink" in /usr/local/lib/python3.4/dist-packages/broadlink and /usr/lib/python3.4/
And restarted the service:

Code: Select all

sudo systemctl restart domoticz.service 

But I still get an error in the log, I'm clearly doing something wrong:

Code: Select all

2017-04-29 13:47:54.340 Error: PluginList: Error 'Error document empty.' at line 0 column 0 in XML ''.
2017-04-29 13:47:56.847 (Broadlink) Stopped.
2017-04-29 13:47:57.047 Error: (BroadlinkRM2) failed to load 'plugin.py', Python Path used was '/home/pi/domoticz/plugins/BroadlinkRM2/:/usr/lib/python3.4/:/usr/lib/python3.4/plat-arm-linux-gnueabihf:/usr/lib/python3.4/lib-dynload'.
2017-04-29 13:47:57.047 Error: (Broadlink) Module Import failed, exception: 'ImportError'
2017-04-29 13:47:57.047 Error: (Broadlink) Module Import failed: ' Name: Crypto'

and:

Code: Select all

2017-04-29 13:53:00.767 Error: Broadlink hardware (10) thread seems to have ended unexpectedly

sudo cp -r /usr/local/lib/python3.5/site-packages/Crypto /usr/local/lib/python3.4/dist-packages
sudo cp -r /usr/local/lib/python3.4/dist-packages/Crypto/ /usr/lib/python3.4/

Python3 --version

Python 3.5.3

Sudo apt-get remove python3

Libpython3.4 libpython3.4-dev python3.4-dev

reza wrote:also for raspberry i want use stable version. can i use this for stable version ?

reza wrote:i want just use stable version 3.5877 (because i did some change in domoticz and i dont want update this). so can you help me for run this on 3.5877 version ?
i need this plugin very