Open source Home Automation System
https://forum.domoticz.com/
If you have a backup of your installation with 2 gateway maybe you can use it, and remove the gateway who is on your baytrail.benj29 wrote:Hehe !!!!
Good idea !
I have a raspberry pi3, free of charge, because i move my installation to another Baytrail, more reliable!!!!
Now, i need to add all my sensors again... but if your idea will works it, it is perfect !
Second solution is to made a VirtualMachine with debian on your baytrail. And compile domoticz from source.benj29 wrote:Hehe !!!!
Good idea !
I have a raspberry pi3, free of charge, because i move my installation to another Baytrail, more reliable
Now, i need to add all my sensors again... but if your idea will works it, it is perfect !
that is a good idea too !Didn't try, but you can try also try to compile on the same machine 2nd domoticz in a different folder, from corbin's git, listening on different port.deennoo wrote:Second solution is to made a VirtualMachine with debian on your baytrail. And compile domoticz from source.benj29 wrote:Hehe !!!!
Good idea !
I have a raspberry pi3, free of charge, because i move my installation to another Baytrail, more reliable
Now, i need to add all my sensors again... but if your idea will works it, it is perfect !
On mine i got exsi and some 3 virtual machine,
Code: Select all
2017-02-07 10:09:40.492 XiaomiGateway: stopped
2017-02-07 10:09:40.492 XiaomiGateway: Worker started...
2017-02-07 10:09:40.584 XiaomiGateway: RGB Gateway Detected
2017-02-07 10:09:40.584 (XiaomiGateway) Lighting Limitless/Applamp (лампа gateway, переключатель)
2017-02-07 10:09:40.588 (XiaomiGateway) Light/Switch (N1)
2017-02-07 10:09:40.588 (XiaomiGateway) Temp (темп+вол, кімната 1 (Xiaomi))
2017-02-07 10:09:40.589 (XiaomiGateway) Humidity (вологість, кімната 1 (XIaomi))
2017-02-07 10:09:40.589 (XiaomiGateway) Light/Switch (N2)
Code: Select all
32 XIAOMI-GARAGE 29CC40B2 1 Anneau lumineux Garage Lighting Limitless/Applamp RGBW Off
1 XIAOMI-GARAGE 0785A7CF 1 Xiaomi RGB Gateway Lighting Limitless/Applamp RGBW Off
murtadin wrote:@Corbin - tried today last beta from your git V3.6635 - i have got semi working build without setting ip manual in XiaomiGateway.cpp. Detected all zigbee devices - but still have error with invalid key, when trying to switch zigbee plug or gatweway light for example.
In XiaomiGateway.cpp i see #ifdef _DEBUG - how can i see output?
Code: Select all
cmake -DCMAKE_BUILD_TYPE=Debug .Depends on your network setup - it will need to pass through the UDP multicast packets to begin with.lamouette wrote:Hi,
Does anyone tried to connect a remote Xiaomi Gateway to domoticz ?
With 9898 port open, it should be ok, right ?
probably just need to delete and re-add the switch, it has extra states now: Off|Click|Long Click|Long Click Release|Double Clickgaladril wrote:Double click is not correctly matched to the selector with the latest beta..
The selector becomes state 'UNDEFINED'.
Ok, so it should not be a problemcorbin wrote:Depends on your network setup - it will need to pass through the UDP multicast packets to begin with.lamouette wrote:Hi,
Does anyone tried to connect a remote Xiaomi Gateway to domoticz ?
With 9898 port open, it should be ok, right ?
Hi deennoodeennoo wrote: Guys ! Corbin and you are the mens of Xiaomi In Domoticz Dev !
got a small teaser for you :
http://domo-attitude.fr/cube-xiaomi-teaser/
Xiaomi Cube + Yeelight : Rotative dimmer !
I promise i will, i m just waiting the next stable version, because this need a change about svalues for applamp/limitless device and need to be tested beforewoody4165 wrote:Hi deennoodeennoo wrote: Guys ! Corbin and you are the mens of Xiaomi In Domoticz Dev !
got a small teaser for you :
http://domo-attitude.fr/cube-xiaomi-teaser/
Xiaomi Cube + Yeelight : Rotative dimmer !
can you share the script to get dimming light with Cube, looks very nice?
Should it work also with a colored Yeelight, just for the dimming part?
Thanks
BTW, just got one, but I'm not able to get these status:
tap_twice
swing
alert
free_fall
Can someone explain how to get those status?
+1woody4165 wrote:Hi deennoodeennoo wrote: Guys ! Corbin and you are the mens of Xiaomi In Domoticz Dev !
got a small teaser for you :
http://domo-attitude.fr/cube-xiaomi-teaser/
Xiaomi Cube + Yeelight : Rotative dimmer !
can you share the script to get dimming light with Cube, looks very nice?
Should it work also with a colored Yeelight, just for the dimming part?
Thanks
deennoo wrote:
I promise i will, i m just waiting the next stable version, because this need a change about svalues for applamp/limitless device and need to be tested before
You can try it be your own : idea is
check svalues of your dimmable device
check rotation svalues
if rotation value change then
dimmer svalues = previous dimmer svalues + rotation value
Working perfectly!deennoo wrote:I got your solution !benj29 wrote:Not sure to understand. Jeedom plug-in is in beta? Yes, same nightmare in this case lol!
I try to remove all my sensors from the second gateway to add on the first one, but I cannot add more than 31...
Envoyé de mon Moto G (4) en utilisant Tapatalk
Add a second domoticz+rpi/syno or anything else for the 2nd gateway and use the domoticz slave system to add the 2nd gateway hardware to your main