Domoticz

Code: Select all

commandArray['OpenURL']="http://127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=6&switchcmd=Stop"

Code: Select all

commandArray = {}

--Extract Wind Gust speed from SValue Wind
wind = otherdevices_svalues['Wind']
print("Wind: "..wind)

--Filter the third digitsequence from SValue
a = string.sub(wind,1,string.find(wind,';',1,true)-1)
--print("a: "..a)

b = string.sub(wind,string.find(wind,';',1,true)+1)
--print("b: "..b)

winddirection = string.sub(b,1,string.find(b,';',1,true)-1)
--print("Winddirection: "..winddirection)

d = string.sub(b,string.find(b,';',1,true)+1)
--print("d: "..d)

windspeed = string.sub(d,1,string.find(d,';',1,true)-1)
print("Windspeed: "..windspeed)

f = string.sub(d,string.find(d,';',1,true)+1)
--print("f: "..f)

windgust = string.sub(f,1,string.find(f,';',1,true)-1)
print("Windgust: "..windgust)

g = string.sub(f,string.find(f,';',1,true)+1)
--print("g: "..g)

temperature = string.sub(g,1,string.find(g,';',1,true)-1)
print("Temperature: "..temperature)

--Extract UV radiation from SValue Wind
solar = otherdevices_svalues['UV']
print("Solar Radiation: "..solar)
--Filter the first digit from SValue
uv = string.sub(solar,1,string.find(solar,';',1,true)-1)
print("UV: "..uv)

--Extract actual rainfall from Rain_SValue
rain = otherdevices_svalues['Regen']
print("Rain: "..rain)

--Filter the first digit from SValue
currentrain = string.sub(rain,1,string.find(rain,';',1,true)-1)
print("Current rain: "..currentrain)

--Filter the last digit from SValue
totalrain = string.sub(rain,string.find(rain,';',1,true)+1)
print("Total rain: "..totalrain)

--Sunscreen thresholds:
        -- Windspeed            = 50 (value is multiplied by 10)
        -- Rain                 =  0.0
        -- UV                   >  3.0
        -- Temperature          >  7.0
        -- Closed       = Down  = On
        -- Open         = Up    = Off

if (timeofday['Daytime'])
        then
                print('It is past sunrise, monitoring variables for Sunscreen')
                if (otherdevices['Sunscreen'] == 'Open' ) then
                print ('Sunscreen is up')
        else
                print ('Sunscreen is down')
end

if (otherdevices['Sunscreen']   == 'Open'
        and currentrain         == '0'
        and temperature         > '7.0'
        and uv                 > '0.0'
        and windspeed           < '50')

then
        print ('Sun is shining, all thresholds OK, lowering Sunscreen')
        commandArray['SendNotification']='Sunscreen#Sunscreen down --> Sun is shining'
        commandArray['Sunscreen']='On'

        elseif (otherdevices['Sunscreen'] == 'Closed' and currentrain > '0') then
                print ('It is raining, raising Sunscreen')
                commandArray['SendNotification']='Sunscreen#Sunscreen up --> It is raining'
                commandArray['Sunscreen']='Off'

        elseif (otherdevices['Sunscreen'] == 'Closed' and temperature < '7.0') then
                print ('Temperature too low, raising Sunscreen')
                commandArray['SendNotification']='Sunscreen#Sunscreen up --> It is too cold'
                commandArray['Sunscreen']='Off'

        elseif (otherdevices['Sunscreen'] == 'Closed' and uv < '3.0') then
                print ('Sun not shining too bright, raising Sunscreen')
                commandArray['SendNotification']='Sunscreen#Sunscreen up --> Sunshine not too bright'
                commandArray['Sunscreen']='Off'

        elseif (otherdevices['Sunscreen'] == 'Closed' and windspeed > '50') then
                print ('Windspeed too high, raising Sunscreen')
                commandArray['SendNotification']='Sunscreen#Sunscreen up --> Windspeed too high'
                commandArray['Sunscreen']='Off'
else
        print('Sunscreen status OK --> No action')
end

elseif (timeofday['Nighttime']
        and otherdevices['Sunscreen'] == 'Closed')
        then
                print('It is night, raising Sunscreen')
                commandArray['SendNotification']='Sunscreen#Sunscreen up --> It is night'
                commandArray['Sunscreen']='Off'
        else
                print('Sunscreen already up --> No action')
end

return CommandArray