Domoticz

Doler wrote:

rafal wrote:Thank You for answer
Stuck on a pre 0.1.x version

apt-get remove mydomoathome
apt-get update
apt-get install MyDomoAtHome

done !

but still the the same :/ waiting for update

PS Thank You epierre for You hard work !

You should put 'sudo' before the commands.

Yes i know, look on my print screen

@rafal try this (sorry I thought that was fixed, image not readable easily on mobile)

sudo chown -R $(whoami) ~/.npm

epierre wrote:@rafal try this (sorry I thought that was fixed, image not readable easily on mobile)

sudo chown -R $(whoami) ~/.npm

Hello,

no problem
i did new instaltaion of domoticz (fresh system ubuntu serwer ) and i used your command, still the same problem with instalation mydomoathome.
Don't rush my old MyDomoAtHome working fine but i' d like to change my old domoathome to new mydomoathome with nodejs


i added new images (print screen) via link on google drive, should be much better to open for You.
https://drive.google.com/file/d/0B5vmlS ... sp=sharing
https://drive.google.com/file/d/0B5vmlS ... sp=sharing

@rafal version °.1.10 from this morning has been reported as working on this issue. do an update and an upgrade.

Someone else pointed me this that I didn't understood first as an issue.

ok
update is 1.09

still the same ;/

https://drive.google.com/file/d/0B5vmlS ... sp=sharing

and to me it shows as 0.1.7...that's bizarre

scratching my head...

at worse you can download here:
http://www.e-nef.com/domoticz/mdah/node ... latest.deb

have you made an apt-get update before ?

Yes

sudo apt-get update then sudo apt-get upgrade

OK so I think I got it, I've managed to install 1.09 which according to apt-get is the latest version.

think there's something wrong with the version numbering no?

April 02 -> 0.1.7
April 06 -> 1.0.9
April 07 -> 0.1.10

MyDomoAtHome:
Installed: 1.0.9
Candidate: 1.0.9
Version table:
*** 1.0.9 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
100 /var/lib/dpkg/status
1.0.8 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.10 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.7 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.6 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.4 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.3 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.2 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.1 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.0 0
500 http://www.e-nef.com/domoticz/mdah/ Packages

ok manually instalation is complete

i don't know under red line is information that You need

SchattenMann wrote:OK so I think I got it, I've managed to install 1.09 which according to apt-get is the latest version.

think there's something wrong with the version numbering no?

April 02 -> 0.1.7
April 06 -> 1.0.9
April 07 -> 0.1.10

MyDomoAtHome:
Installed: 1.0.9
Candidate: 1.0.9
Version table:
*** 1.0.9 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
100 /var/lib/dpkg/status
1.0.8 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.10 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.7 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.6 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.4 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.3 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.2 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.1 0
500 http://www.e-nef.com/domoticz/mdah/ Packages
0.1.0 0
500 http://www.e-nef.com/domoticz/mdah/ Packages

i think so, about version you're right, look on my print screen: my domo is downgrading from 1.0.9 to 0.1.10 ;/

1.10 working :D:D

AppName: MyDomoAtHome
MDAH: http://10.216.xxx.xxx:3002
Domoticz: http://127.0.0.1:8080
NodeJS: v4.4.2
Webmanager: EJS
Renderer: Express

Hello,

looks like I did number wrong at some point, V1.0.0 will be when graphs will be back there

the red line is jus ta Warning... forget it!

I have this all up and running on my Pi2 no problem, and have ImperiHome on my Android phone connected to it ok. Is there a way for ImperiHome to group devices by the Rooms/Plans that Domoticz uses at all? Thanks

doh wrote:I have this all up and running on my Pi2 no problem, and have ImperiHome on my Android phone connected to it ok. Is there a way for ImperiHome to group devices by the Rooms/Plans that Domoticz uses at all? Thanks

yes I have it in my backlog...

@all graphes for devices are back in day/week/month/year, some are still to be put it:

https://github.com/empierre/MyDomoAtHome/issues/90

I have a proposal for PlanID here, can you comment if this is fine for you ?

https://github.com/empierre/MyDomoAtHome/issues/57

@all I'm searching for the devices you would have with z-wave on blinds+energy or switch+energy plugs please contact me !

Hi

I am an newbie to Domoticz and Imperihome now, and I'm very pleased to have it running in my local network.
Al my devices are lock and loaded and its works (most of the time) very good.
However, it would be nice to have it running outside my local network.
So I followed the wiki (http://www.domoticz.com/wiki/Secure_Nginx_Proxy_Setup) and installed it, till I get to the point where I have to remove the pass phrase from the server key.
Wenn I enter : sudo openssl rsa -in /etc/ssl/private/server.key -out /etc/ssl/private/server.key

The answer is:
unable to load Private Key
3069404368:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:703:Expecting: ANY PRIVATE KEY

This is a little odd, because I do have a server.key in the mentioned directory.

Does anybody know what the probem can be?

Thnaks in advance

Hello,

looks like you had an issue during the "sudo nano /etc/ssl/private/server.key", try again this step

@all latest versions now support:
- PlanID
- domoticz camera
- instant energy with the switch
- use of protected devices

cheers & many thanks to all contributors !