I'm making some progress but have reached a dead end at the moment with the command that it sent to the TUYA API from climate.py, ie instead of setting the setpoint temperature, the controller itself goes into an error mode.
Code: Select all
self.api.device_control(self.obj_id, "temperatureSet", {"value": float(temperature)})
Code: Select all
def current_temperature(self):
"""Return current temperature for the device"""
curr_temp = self._set_decimal(
self.data.get("current_temperature"), self._ct_divider
)
# when current temperature is not available, target temperature is returned
if curr_temp is None:
return self.target_temperature()
return curr_temp
Thank you for the link which I've looked at in detail. Unfortunately I'm still struggling getting the SetPoint to work, i.e. I can read the "temperature" fine, but cannot change it in the API. In the code below from climate.py, even by manually setting the temperature (SetPoint), e.g. to 150 (my controller is x10 the actual temperature) the controller displays strange characters until I use the Smartlife App to change the setpoint to another value. So the code definitely is sending data to the API but I can only assume that its not what it was expecting. Any more clues please?Xenomes wrote: ↑Tuesday 27 September 2022 19:51 In the https://github.com/PaulAnnekov/tuyaha/b ... climate.py
Code: Select all
def set_temperature(self, temperature):
"""Set new target temperature."""
self.api.device_control(self.obj_id, "temperatureSet", {"value": 150})
I think these lights are using the new api. I am experimenting with a other type of controlling the tuya devices. I will contact you on pm for a export of some tuya data. If you want to of course
Did you update to the new version 2022.2? The plugin is not ready to use the new blind control system. I will update the plugin later this day, but i can't test it, I don't have Tuya blindsrolandtwilt wrote: ↑Saturday 12 November 2022 10:57 and suddenly.................. the plugin doesn't work anymore.
Reinstalled, added hardware, transferred data from the app.....and it doesn't do anything
No error message in domoticz log and the blinds can be used via the Tuya app.
The USB stick (=router) also works, what's wrong?
Code: Select all
cd domoticz/plugins/Domoticz-TUYA-Plugin
git pull
git checkout update-for-domoticz-2022.2
Perfect! Then i will push it to the main branch, thanks for reporting and testing!
FearNaBoinne wrote: ↑Friday 11 November 2022 17:17 I am testing with Action LSC smokesensors. They're not showing up. Would you be able to add these with the right information?
I am almost sure that these devices are using the newer api. For sure you can run the debug_discover.py from the tools directory to see if there is json data available for the smoke detectors. ps. don't forget the edit file for the tuya credentials.FearNaBoinne wrote: ↑Sunday 13 November 2022 21:08 I am testing with Action LSC smokesensors. They're not showing up. Would you be able to add these with the right information?
Code: Select all
Getting credentials
Got credentials
{ 'access_token': 'EUheu1668*********GD0bNLB9EcgSBIT',
'expires_in': 864000,
'refresh_token': 'EUheu1668*********GD0bNvGJ0gcogAd',
'token_type': 'bearer'}
Getting devices
Got devices
{ 'header': {'code': 'SUCCESS', 'payloadVersion': 1},
'payload': {'devices': [], 'scenes': []}}
!!! NOW REMOVE THIS FILE, SO YOUR CREDENTIALS (username, password) WON'T LEAK !!!The json string of devices is empty so no support from api v1. Question do you have a IOT account at Tuya?FearNaBoinne wrote: ↑Monday 14 November 2022 13:17Code: Select all
'payload': {'devices': [], 'scenes': []}}
I'm not certain... It's been a while since I did work with Tuya, and remember looking at it, but cannot remember if I went through with that... I will check!Xenomes wrote: ↑Monday 14 November 2022 13:26The json string of devices is empty so no support from api v1. Question do you have a IOT account at Tuya?FearNaBoinne wrote: ↑Monday 14 November 2022 13:17Code: Select all
'payload': {'devices': [], 'scenes': []}}
Can you edit and run this script?
Code: Select all
wget https://raw.githubusercontent.com/Xenomes/Domoticz-TinyTUYA-Plugin/dev/tools/debug_discovery.pyI will as soon as I get approved...Xenomes wrote: ↑Monday 14 November 2022 22:39Can you edit and run this script?It creates a dump.json can you PM the file?Code: Select all
wget https://raw.githubusercontent.com/Xenomes/Domoticz-TinyTUYA-Plugin/dev/tools/debug_discovery.py