Open source Home Automation System
https://forum.domoticz.com/
Great ! via the gateway or something else ?Sevift wrote:it's possible!Sevift wrote:Xiaomi Mi Robot Vacuum - Is that possible? )
Снимок экрана 2017-01-08 в 21.06.53.png
I'm using windows 10 64-bit and I can see everythingicibt wrote:Are you installing Domoticz on Windows 10 64bit? If that is the case, you won't see any devices... don't know why. Others have the same problem.WrathfulFab wrote:Update to a beta version? Domoticz or my Gateway?
My domoticz version is 3.6288
My gateway version is 1.4.1_142.0141
Hi deennoodeennoo wrote:Left to get compatibel :
- Magic Cube : playing with this remote is fun !
...
Via python scriptdeennoo wrote:Great ! via the gateway or something else ?Sevift wrote:it's possible!Sevift wrote:Xiaomi Mi Robot Vacuum - Is that possible? )
Снимок экрана 2017-01-08 в 21.06.53.png
If you get the purifier working on Domoticz i would definitely order oneben53252642 wrote:Well I've ordered the Xiaomi Air Purifier 2nd gen with Wifi (which I'll figure out how to integrate into Domoticz) and another 6x motion sensors (making 12 in total now). The Xiaomi motion sensors use the CR2450 coin cell batteries, which only have about 550 - 630 mah capacity which is fascinating considering the Fibaro Gen5 Door/Window sensor has a 1200mah capacity battery and my TKB 4 in 1 motion / door sensors use a 1500mah capacity 123 battery. The Aeotec 2nd gen door / window sensors use a couple of AAA batteries which are usually about 1250mah each so 2500mah total.
Now Zigbee has lower power consumption compared to Z-Wave and considering the Xiaomi motion sensor only does motion...
Has anyone sent the batteries in a Xiaomi motion sensor flat yet? How long did it last?
The good thing about CR2450 is the batteries can be bought for around $0.45 AUD each.
https://www.aliexpress.com/wholesale?ca ... ext=CR2450
Corbin I'd say your guess that they only transit a battery level below a certain threshold is extremely likely, they would be doing everything possible to conserve energy.
Actually I'm going to test it with one of the sensors when I get it by deliberately running down the cell with a 3v motor then putting it in the sensor and seeing what happens.
Ok ! Can you share it please ?Sevift wrote:Via python scriptdeennoo wrote:Great ! via the gateway or something else ?Sevift wrote:
it's possible!
Снимок экрана 2017-01-08 в 21.06.53.png
All is done on domoticz side, you/we have to wait for a gateway fw update, as already says previously.woody4165 wrote:Hi deennoodeennoo wrote:Left to get compatibel :
- Magic Cube : playing with this remote is fun !
...
Is there any chance to get the Magic Cube work with domoticz?
I've just bought one (waiting for delivery) since the price was very low, and I was wondering to use it with domoticz.
Thanks
I used vereschark to intercept packets.deennoo wrote:Ok ! Can you share it please ?Sevift wrote:Via python scriptdeennoo wrote:
Great ! via the gateway or something else ?
Code: Select all
#!/usr/bin/python
import socket
import sys
import codecs
UDP_IP = '192.168.100.18'
UDP_PORT = 54321
INET_ADDR = (UDP_IP,UDP_PORT)
action = str(sys.argv[1])
massage = "213100500000000002f2c97b5872"
if action == "start":
message_to_send = massage + "2fd096c280746dc2091bad1d30c49ce74da6c88492a5c0e7c427ad0b4ca98c3b08ea35e67b29dddd8624dd1f2ea46ced68fce3c5b7fef8e89eef60b3c777f43a5622"
if action == "pause":
message_to_send = massage + "3080fdc4d67fe6fd048b63eb6d2cee5f285f8fec54c2e3bc5486641ec620bae160e9717af4d17ce3c0265bcb807644dae475bcaaf089391f6f76fa85b31396af3e26"
if action == "home":
message_to_send = massage + "30e4006525a8e0420c337fbc2bfc1741369bb9760685aafe250790ee4ea8bda3aafbdfaa47ae0e8518503530fb72579fe8cf334c6a6fcd4cbc94bfb310f64163a80a"
if action == "find":
message_to_send = massage + "29d24b61f9c826221c4c7a68be606ff324f81fcc282e18fa679d0506e3e805cbfe56323f2dc292f5d609d20782cb6df1abe3b4a9ce062da42e3371126048c2213b3e"
message_to_send = codecs.decode(message_to_send, "hex_codec")
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock.sendto(message_to_send, INET_ADDR)Thanks, isn't really for me, but if some one get the robot and can try your script and works, that a good tricksSevift wrote:I used vereschark to intercept packets.deennoo wrote:Ok ! Can you share it please ?Sevift wrote:
Via python script
I do not know whether they will suit you.
Probably everyone has their own packages.
I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?Sevift wrote:I used vereschark to intercept packets.deennoo wrote:Ok ! Can you share it please ?Sevift wrote:
Via python script
I do not know whether they will suit you.
Probably everyone has their own packages.
Снимок экрана 2017-01-09 в 13.34.57.pngCode: Select all
#!/usr/bin/python import socket XXXX XXXX XXXX sock.sendto(message_to_send, INET_ADDR)
For example, a vacuum cleaner Searchn1c0l45 wrote: I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?
thanks
When Domoticz dev will decide to publish a new stable version.jumping wrote:Hi,
when do you think the Xiaomi Home will be available in Domoticz stable version?
thanks for great job!
Is there are any improvements ? Battery level from sensors? Does log file shows something new?arkoko wrote:Yes.
Sevift wrote:For example, a vacuum cleaner Searchn1c0l45 wrote: I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?
thanks
Install BlueStacks on PC (Mac)
Install MiHome app on BlueStacks and connect Mi Robot
Снимок экрана 2017-01-10 в 18.46.24.png
On MiHome see ip adress Mi Robot
Run vereschark and select interface network PC
Снимок экрана 2017-01-10 в 18.45.58.png
Run intercept packets
Снимок экрана 2017-01-10 в 18.47.00.png