Domoticz

quack3d wrote: ↑Thursday 03 May 2018 11:46 Apparently there's now a working plugin working for Zigate: https://www.domoticz.com/wiki/Zigate

Anyone tried it?

I tried Xiaomi power socket and Aqara motion sensor, more or less works.

But I have error messages in the log:

2018-05-13 08:21:29.353 Error: (Zigate) 'onMessage' failed 'KeyError'.
2018-05-13 08:21:29.353 Error: (Zigate) ----> Line 307 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function onMessage
2018-05-13 08:21:29.355 Error: (Zigate) ----> Line 121 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function onMessage
2018-05-13 08:21:29.356 Error: (Zigate) ----> Line 372 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ZigateDecode
2018-05-13 08:21:29.358 Error: (Zigate) ----> Line 616 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ZigateRead
2018-05-13 08:21:29.360 Error: (Zigate) ----> Line 777 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function Decode8102
2018-05-13 08:21:29.360 Error: (Zigate) ----> Line 1190 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ReadCluster

Looks to be reported here: https://github.com/sasu-drooz/Domoticz-Zigate/issues/81

But I don't understand French.

Hi,
Aqara has released a new version of the cube, on a forum I read that this is currently not accepted in domoticz by the new naming. Is there a possibility to get it working?
Link:
https://github.com/Danielhiversen/PyXia ... /issues/67

dear all..
I see a new yeelight bulb??
Someone has this type working in Domoticz?

https://nl.aliexpress.com/item/YEELIGHT ... autifyAB=0

Derik wrote: ↑Tuesday 15 May 2018 19:44 dear all..
I see a new yeelight bulb??
Someone has this type working in Domoticz?

https://nl.aliexpress.com/item/YEELIGHT ... autifyAB=0

Works like a charm. Exactly the same way the previous versions were added to domoticz.
(connect to Yeelight app, enable LAN control on bulb, remember IP , add device in Yeelight hardware in domoticz, set device active in domoticz,give bulb fixed IP on your router)

Hello,
I have a power socket wall, and detects only the switch (on/off) not consumption (in mihome it detects the consumption). Anyone have this device???

is there perhaps a maximum part of devices that the bridge can handle?? [ or domoticz? ]
How many?

Anybody got the aqara curtains working with domoticz? I can add the blind switch (learn mode) but i cannot operate it, nor does it change status when controlling it with the mi home app.

mmm looks promissing... And the rails?? does it fit on other systems???

No Idea, if it fits other systems. I just ordered the dt82 rail from alie but I have seen on tweakers.net it should fit the somfy rails

where is the tweakers topic?

WAF like elektric curtains so i make her happy WAF happy me happy

Sorry, i have read it wrong. The person orderd a somfy rail plus motor and discused about the lengte of the rail and shipping.

https://gathering.tweakers.net/forum/li ... /1811109/0

Tweakers.net URL for xiaomi goodies

Aqara Smart Wireless Switch

Coupon: GBMAYNEWFY Prise: from: 5 for: 4.26

Hello,
Someone have the aqara vima smart lock ??

i got the gateway with some sensors but the gateway disconnects after 12 hours or so and then i have to set it up with the app again. someone experience with this?

since last betas, my socket dont show consumption. anyone more?

mm dear all..
there is a new update of te yeelight app???
I cannot come into the yeelght app?
Only to the mihome app...
Only in the mihome i cannot set the new bulb into the lan option..
Someone can help me??

no one knows???

Dear all.
Are this lights also supported?
https://www.yeelight.com/en_US/product/luna-se

yes, there is a seperate hardware thingy for that: https://www.domoticz.com/wiki/Yeelight
note: do not forget to turn on lan access in the yeelight app otherwise domoticz wont find your lights, i spent hours troubleshooting but i forgot that step