Domoticz

jelleeelco wrote: ↑Tuesday 12 December 2017 10:57

jelleeelco wrote: ↑Tuesday 12 December 2017 10:26

corbin wrote: ↑Sunday 10 December 2017 10:54 multiple gateway support is in the beta only

Hi Corbin,
Please see my post below. I got two gateways in my MiHome app, only in domoticz. Devices from both gateways come to domoticz as if it was from one gateway.

This worked on both beta as well as stable versions of domoticz. As far as I could tell, adding a second gateway only has to happen in the MiHome app, nothing needs to be done in Domoticz.

But please let me know in case I'm wrong!

Ahhhh silly me...

It just sees the second Gateway, just as if you would enter a wrong IP/password in the gateway settings. You can see updates when done physically (switch) but not when done from MiHome app. You can also not control the switches from Domoticz.

Is my assumption correct that this setup would work for window sensors, temperature sensors and motion detectors? And then lights/switches on the gateway that is added to Domoticz?

mvveelen wrote: ↑Tuesday 12 December 2017 20:55 Anyone who has a link to a Xiaomi wall switch which I can use to switch a light with (220V) and which sends a signal to the gateway AND which I can use in Europe in a regular flush-mounted box (about 76mm diameter) ? I see some switches, but they don't seem to fit in the Dutch boxes I think.

DAVIZINHO wrote: ↑Tuesday 12 December 2017 22:12

jelleeelco wrote: ↑Tuesday 12 December 2017 10:57

jelleeelco wrote: ↑Tuesday 12 December 2017 10:26

Hi Corbin,
Please see my post below. I got two gateways in my MiHome app, only in domoticz. Devices from both gateways come to domoticz as if it was from one gateway.

This worked on both beta as well as stable versions of domoticz. As far as I could tell, adding a second gateway only has to happen in the MiHome app, nothing needs to be done in Domoticz.

But please let me know in case I'm wrong!

Ahhhh silly me...

It just sees the second Gateway, just as if you would enter a wrong IP/password in the gateway settings. You can see updates when done physically (switch) but not when done from MiHome app. You can also not control the switches from Domoticz.

Is my assumption correct that this setup would work for window sensors, temperature sensors and motion detectors? And then lights/switches on the gateway that is added to Domoticz?

hello,
in first place, sorry for my poor english. is not my natural languaje.

In the past I tried to connect a second gateway to domoticz adding this as "aditional gateway" this not works because only one gateway works.
After this i connect a second domoticz and this second gateway connected in the second domoticz. apears duplicate sensor and was a kaos. :-O
After this i connect a second gateway in a second subnet and configure one as slave and one as master. This works fine, not perfect but fine.

Your idea is connect the second gateway at wifi and configure it in my home. no more? with this the sensor works??? :-O

jelleeelco wrote: ↑Tuesday 12 December 2017 22:20

mvveelen wrote: ↑Tuesday 12 December 2017 20:55 Anyone who has a link to a Xiaomi wall switch which I can use to switch a light with (220V) and which sends a signal to the gateway AND which I can use in Europe in a regular flush-mounted box (about 76mm diameter) ? I see some switches, but they don't seem to fit in the Dutch boxes I think.

Hi,

I bought one and tried to build it in: doesn't work. It simply does not fit. There is no xiaomi switch that fits in the Dutch boxes, don't waist your money.

jelleeelco wrote: ↑Tuesday 12 December 2017 22:25

DAVIZINHO wrote: ↑Tuesday 12 December 2017 22:12

jelleeelco wrote: ↑Tuesday 12 December 2017 10:57

Ahhhh silly me...

It just sees the second Gateway, just as if you would enter a wrong IP/password in the gateway settings. You can see updates when done physically (switch) but not when done from MiHome app. You can also not control the switches from Domoticz.

Is my assumption correct that this setup would work for window sensors, temperature sensors and motion detectors? And then lights/switches on the gateway that is added to Domoticz?

hello,
in first place, sorry for my poor english. is not my natural languaje.

In the past I tried to connect a second gateway to domoticz adding this as "aditional gateway" this not works because only one gateway works.
After this i connect a second domoticz and this second gateway connected in the second domoticz. apears duplicate sensor and was a kaos. :-O
After this i connect a second gateway in a second subnet and configure one as slave and one as master. This works fine, not perfect but fine.

Your idea is connect the second gateway at wifi and configure it in my home. no more? with this the sensor works??? :-O

Correct. Remember, in wiki it clearly states that even if your ip adres or password is wrong, it will still receive input.from the gateway. Same as for a second one: not even added to domoticz, but one your network..... Domoticz will receive all updates. I have a second one added like that to MiHome without changing anything in domoticz and all the sensors work (even wireless switches work).

After last night though (added second domoticz) nothing worked, wife angry and now getting rid.of it all. Back to manual switching the.lights!

jelleeelco wrote: ↑Wednesday 13 December 2017 12:31 Yes, instant

welby wrote: ↑Thursday 14 December 2017 7:50 Any tips on how to add a motion sensor? Just received a motion sensor and another 2 door switches which domoticz has added no worries but it won't see the motion sensor.

jelleeelco wrote: ↑Tuesday 12 December 2017 22:25

DAVIZINHO wrote: ↑Tuesday 12 December 2017 22:12

jelleeelco wrote: ↑Tuesday 12 December 2017 10:57

Ahhhh silly me...

It just sees the second Gateway, just as if you would enter a wrong IP/password in the gateway settings. You can see updates when done physically (switch) but not when done from MiHome app. You can also not control the switches from Domoticz.

Is my assumption correct that this setup would work for window sensors, temperature sensors and motion detectors? And then lights/switches on the gateway that is added to Domoticz?

hello,
in first place, sorry for my poor english. is not my natural languaje.

In the past I tried to connect a second gateway to domoticz adding this as "aditional gateway" this not works because only one gateway works.
After this i connect a second domoticz and this second gateway connected in the second domoticz. apears duplicate sensor and was a kaos. :-O
After this i connect a second gateway in a second subnet and configure one as slave and one as master. This works fine, not perfect but fine.

Your idea is connect the second gateway at wifi and configure it in my home. no more? with this the sensor works??? :-O

Correct. Remember, in wiki it clearly states that even if your ip adres or password is wrong, it will still receive input.from the gateway. Same as for a second one: not even added to domoticz, but one your network..... Domoticz will receive all updates. I have a second one added like that to MiHome without changing anything in domoticz and all the sensors work (even wireless switches work).

After last night though (added second domoticz) nothing worked, wife angry and now getting rid.of it all. Back to manual switching the.lights!

jelleeelco wrote: ↑Tuesday 12 December 2017 10:57 Is my assumption correct that this setup would work for window sensors, temperature sensors and motion detectors? And then lights/switches on the gateway that is added to Domoticz?

Andree wrote: ↑Friday 15 December 2017 16:33 Hi man,can you explain step by step how i can add a second gateway please?update after update i'm not sure witch solution work fine!

madrian wrote: ↑Thursday 14 December 2017 8:11 upgrade to beta

Schorschi wrote: ↑Monday 18 December 2017 14:43 Hello,

is it possible to get direct access to sensor data over JSON command?

For example i want read the state of an Door Switch directly from the Xiaomi Gateway with an LUA script.

Thx

{"cmd":"read"","sid":"158d000111eed3"}