Domoticz

Posted: **Saturday 24 October 2020 10:45**

Hi,

I've rebuild this script for my purpose, but just need one additional functionality.
When i'm switch on the alarm mode i'm still standing in the room and of course the PIR will be activated.
Is it possible to have a delay to give time to leave the room without making any dummy switches ?

This is my script so far

Code: Select all

local scriptVar = '-=# inbraak #=-'

return {
	on = {
		devices = {
			'Sensor - Achterdeur',                     -- door contact in de woonkamer
			'Sensor - Garagedeur',                     -- door contact in de garage
			'PIR Sensor',                              -- PIR Sensor
		}
	},
	
	ustomEvents =
        {
            scriptVar,
        },

	logging =
    {
        level = domoticz.LOG_DEBUG, 
        marker = '-=# inbraak #=-',
    },
	
	execute = function(dz, item)
	    local Achterdeur = dz.devices('Sensor - Achterdeur')
	    local Garagedeur = dz.devices('Sensor - Garagedeur')
	    local PIR = dz.devices('PIR Sensor')
	    local alarmmode = dz.devices('Alarm mode')
	    local lamp = dz.groups('Woonkamer')  -- Alle lampen in woonkamer
	            local delay = 10
	    
		if (Achterdeur.state == 'On' or Garagedeur.state == 'On' or PIR.state == 'On' ) and alarmmode.state == 'On' then
		                    dz.emitEvent(scriptVar).afterSec(delay)
		    lamp.switchOn()
		    --dz.log('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.LOG_DEBUG)
		    dz.log(item.name .. ' Alarm switched On',dz.LOG_DEBUG)
		    dz.notify('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.PRIORITY_HIGH)
		end
 
	end
}
}

Posted: **Saturday 24 October 2020 11:08**

madpatrick wrote: ↑Saturday 24 October 2020 10:45 Is it possible to have a delay to give time to leave the room without making any dummy switches ?

A solution could look like

Code: Select all

local scriptVar = '-=# inbraak #=-'

return
{
    on =
    {
        devices =
        {
            'Sensor - Achterdeur',                     -- door contact in de woonkamer
            'Sensor - Garagedeur',                     -- door contact in de garage
            'PIR Sensor',                              -- PIR Sensor
        },
    },

    logging =
    {
        level = domoticz.LOG_DEBUG,
        marker = scriptVar,
    },

    execute = function(dz, item)
        local Achterdeur = dz.devices('Sensor - Achterdeur')
        local Garagedeur = dz.devices('Sensor - Garagedeur')
        local PIR = dz.devices('PIR Sensor')
        local alarmMode = dz.devices('Alarm mode')
        local lamp = dz.groups('Woonkamer')  -- Alle lampen in woonkamer
        local delay = 10

        if (Achterdeur.state == 'On' or Garagedeur.state == 'On' or PIR.state == 'On' ) and alarmMode.state == 'On' then
            if alarmMode.lastUpdate.secondsAgo > delay then
                lamp.switchOn()
                --dz.log('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.LOG_DEBUG)
                dz.log(item.name .. ' Alarm switched On',dz.LOG_DEBUG)
                dz.notify('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.PRIORITY_HIGH)
            else
                dz.log(item.name .. ' was activated but ' .. alarmMode.name .. ' was activated only ' .. alarmMode.lastUpdate.secondsAgo .. ' seconds ago',dz.LOG_DEBUG)
            end
        end
    end
}

Posted: **Saturday 24 October 2020 17:46**

Thanks Waaren !.

Is it possible to change the logging ?
Now everytime when the alarmmode is not switched on and you walk across the PIR, you will see a log entry.
This will grow to much and makes no sense.

LOG

Code: Select all

[code]2020-10-24 17:34:33.651 Status: dzVents: Debug: -=# inbraak #=-: Processing device-adapter for Sensor - Garagedeur: Switch device adapter
2020-10-24 17:34:33.651 Status: dzVents: Debug: -=# inbraak #=-: Processing device-adapter for Alarm mode: Switch device adapter
2020-10-24 17:34:33.652 Status: dzVents: Debug: -=# inbraak #=-: Processing device-adapter for Woonkamer: Group device adapter
2020-10-24 17:34:33.652 Status: dzVents: Info: -=# inbraak #=-: ------ Finished Burglar
2020-10-24 17:35:00.541 Status: LUA: (Buienradar) Get data from Buienradar

[/code]

I've changed:

Code: Select all

--    logging =
    {
        level = domoticz.LOG_ERROR,
        marker = scriptVar,
    },

But this gives not logging at all when the alarm get's triggered.
for example this line

Code: Select all

dz.log(item.name .. ' Alarm switched On',dz.LOG_DEBUG)

Posted: **Saturday 24 October 2020 18:52**

I've changed it to LOG_INFO and now I see the log lines in the log.
Only it woud be nice to see it only when the alarm mode is ON

Posted: **Saturday 24 October 2020 19:03**

madpatrick wrote: ↑Saturday 24 October 2020 18:52 I've changed it to LOG_INFO and now I see the log lines in the log.
Only it woud be nice to see it only when the alarm mode is ON

Code: Select all

local scriptVar = '-=# inbraak #=-'

return
{
    on =
    {
        devices =
        {
            'Sensor - Achterdeur',                     -- door contact in de woonkamer
            'Sensor - Garagedeur',                     -- door contact in de garage
            'PIR Sensor',                              -- PIR Sensor
        },
    },

    logging =
    {
        level = domoticz.LOG_ERROR,
        marker = scriptVar,
    },

    execute = function(dz, item)
        local Achterdeur = dz.devices('Sensor - Achterdeur')
        local Garagedeur = dz.devices('Sensor - Garagedeur')
        local PIR = dz.devices('PIR Sensor')
        local alarmMode = dz.devices('Alarm mode')
        local lamp = dz.groups('Woonkamer')  -- Alle lampen in woonkamer
        local delay = 10

        if alarmMode.state == 'On' then
            dz.log('alarmMode geactiveerd',dz.LOG_FORCE)
        end
        
        if (Achterdeur.state == 'On' or Garagedeur.state == 'On' or PIR.state == 'On' ) and alarmMode.state == 'On' then
            if alarmMode.lastUpdate.secondsAgo > delay then
                lamp.switchOn()
                --dz.log('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.LOG_FORCE)
                dz.log(item.name .. ' Alarm switched On',dz.FORCE)
                dz.notify('Inbraak (thuis)!!',item.name .. ' geactiveerd',dz.PRIORITY_HIGH)
            else
                dz.log(item.name .. ' was activated but ' .. alarmMode.name .. ' was activated only ' .. alarmMode.lastUpdate.secondsAgo .. ' seconds ago',dz.LOG_DEBUG)
            end
        end
    end
}

Posted: **Sunday 25 October 2020 14:09**

@Waaren,

Thanks for your support, it works as desired.

Posted: **Thursday 31 December 2020 11:13**

Hi,
I have the script running, but i like make the notification samrter when a doorsensor is activate.
Currently I've a message on my screen when a door is openend and also indicating which one.
I'm extenting the amount of doorsensors, so maybe it is easier to hanle the messaging and combined it in the script ?

I've activating the message in custom.js and custom.css, but need to make a seperate message block for each sensor.
Now only 2 sensors, but will extend to 4-5 pcs

custom.js

Code: Select all

function handleMessage() {
   if (trigger_182 && trigger_188)
        Dashticz.setBlock('emptyblock1', { addClass: 'message4' });
   else if (trigger_182)
        Dashticz.setBlock('emptyblock1', { addClass: 'message2' });
   else if (trigger_188)
        Dashticz.setBlock('emptyblock1', { addClass: 'message3' });
   else
        Dashticz.setBlock('emptyblock1', { addClass: '' });
}

custom.css

Code: Select all

.warning2 {
  	visibility: visible;
}
.warning2:before {
  	content: "Alarm Activated";
	background: rgba(255,0,0,0.6) !important;
	background-clip: padding-box;
	border: 3px solid white !important;
	border-radius: 15px!important;
	font-size: 20px !important;
	visibility: visible;
	position: absolute;
	top: 15px;
	right: 15px;
	width: 200px;
	padding: 10px;
	text-align : center;
}

.message1 {
	background: rgba(255,255,0,0.3) !important;
	background-clip: padding-box;
	border: 3px solid white !important;
	border-radius: 15px!important;
}

.message2 {
  	visibility: visible;
}
.message2:before {
  	content: "Deur Erker Open";
	background: rgba(255,255,0,0.3) !important;
	background-clip: padding-box;
	border: 3px solid white !important;
	border-radius: 15px!important;
	font-size: 20px !important;
	visibility: visible;
	position: absolute;
	top: 15px;
	left: 15px;
	width: 200px;
	padding: 10px;
	text-align : center;
}

.message3 {
  	visibility: visible;
}
.message3:before {
  	content: "Deur Garage Open";
	background: rgba(255,255,0,0.3) !important;
	background-clip: padding-box;
	border: 3px solid white !important;
	border-radius: 15px!important;
	font-size: 20px !important;
	visibility: visible;
	position: absolute;
	top: 15px;
	left: 15px;
	width: 200px;
	padding: 10px;
	text-align : center;
}

.message4 {
  	visibility: visible;
}
.message4:before {
  	content: "Deur Erker en Garage Open";
	background: rgba(255,255,0,0.3) !important;
	background-clip: padding-box;
	border: 3px solid white !important;
	border-radius: 15px!important;
	font-size: 20px !important;
	visibility: visible;
	position: absolute;
	top: 15px;
	left: 15px;
	width: 200px;
	padding: 10px;
	text-align : center;

Is it possible to generate 1 block which will display the name of the sensor(s) ?
I believe the text is possible to generate for a variable : content : var(--name type-or-unit)
Or something like this

Domoticz

Notification script

Re: Notification script

Re: Notification script

Re: Notification script

Re: Notification script

Re: Notification script

Re: Notification script

Re: Notification script