Domoticz

jumbotroll wrote: ↑Monday 03 August 2020 21:54 Test version Domoticz Beta for Geminilake is uploaded.

Download here: http://www.jadahl.com/

cp210x: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '

IpMan wrote: ↑Tuesday 11 August 2020 6:06

jumbotroll wrote: ↑Monday 03 August 2020 21:54 Test version Domoticz Beta for Geminilake is uploaded.

Download here: http://www.jadahl.com/

Trying to use UsbSerialDrivers DSM 6.2 v6-7 on a DS720+ but getting:

Code: Select all

cp210x: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '

whistler wrote: ↑Sunday 09 August 2020 22:09

jumbotroll wrote: ↑Tuesday 14 July 2020 20:10

eSbek wrote: ↑Tuesday 14 July 2020 15:45

@jumbotroll
I upgraded from 2020.1.11835-8 to 2020.2.12213-8 (cedarview version, DS412+) and domoticz hangs / stops after the start. I had to go back to 2020.1

I have also seen that this happens occasionally in recent versions. I have not located the problem, but if you press RUN a couple of times in the package center on domoticz, it tends to start. It also usually starts immediately after a reboot of the NAS.
If you use Python plugin, it can be a plugin problem?
Remember to also install official Python3 package from synology first if you install domoticz with python or domoticz will not run.

Hi,
For me Domoticz beta ver. 2020.2.12213-8 (on Synology DS215j) does not work at all. The installation went smoothly, but now even trying to restart Domoticz several times does not work. So all my sensors and actors got stupid. I am waiting for a new beta update hoping that Domoticz will start working again.
Best regards

jumbotroll wrote: ↑Tuesday 11 August 2020 10:11

whistler wrote: ↑Sunday 09 August 2020 22:09

jumbotroll wrote: ↑Tuesday 14 July 2020 20:10

I have also seen that this happens occasionally in recent versions. I have not located the problem, but if you press RUN a couple of times in the package center on domoticz, it tends to start. It also usually starts immediately after a reboot of the NAS.
If you use Python plugin, it can be a plugin problem?
Remember to also install official Python3 package from synology first if you install domoticz with python or domoticz will not run.

Hi,
For me Domoticz beta ver. 2020.2.12213-8 (on Synology DS215j) does not work at all. The installation went smoothly, but now even trying to restart Domoticz several times does not work. So all my sensors and actors got stupid. I am waiting for a new beta update hoping that Domoticz will start working again.
Best regards

1. Did you install the Python 3 package from synology first ? . domoticz with python plugin don't start if you not install this package first.
2. Did you test domoticz package without python plugin? This should start on you NAS without Python package.

eSbek wrote: ↑Saturday 05 September 2020 10:36 my situation is similar, 2020.2 crashes on python plugin manager (segmentation fault). Deleting the plugins from plugin folder makes Domoticz starts properly. I found the plugin developers had to rewrite the plugin for 2020.2 and made it with Python v3.7.3.
https://www.domoticz.com/forum/viewtopi ... 00#p246401
"Yesterday we installed Domoticz v2020.2 and saw lots of issues due to changes in Domoticz, Python and pymodbus plugin versions, after a whole day programming, troubleshooting and adding new and better features we have updated the plugin, changelog:"
Anyway new plugin is still not compatible with our 2020.2 and crashes it same way probably due to python3.5 used in our Domoticz.

SteGe wrote: ↑Sunday 06 September 2020 19:30 Hi Jumbotroll, thanks for your great support and help so far!

I have tried this version last week (or did you include the python package today?) but unfortunately it didn't work. Seems like there is still a reference to the synology version of Python in the python plugins...

jumbotroll wrote: ↑Sunday 06 September 2020 18:13

eSbek wrote: ↑Saturday 05 September 2020 10:36 my situation is similar, 2020.2 crashes on python plugin manager (segmentation fault). Deleting the plugins from plugin folder makes Domoticz starts properly. I found the plugin developers had to rewrite the plugin for 2020.2 and made it with Python v3.7.3.
https://www.domoticz.com/forum/viewtopi ... 00#p246401
"Yesterday we installed Domoticz v2020.2 and saw lots of issues due to changes in Domoticz, Python and pymodbus plugin versions, after a whole day programming, troubleshooting and adding new and better features we have updated the plugin, changelog:"
Anyway new plugin is still not compatible with our 2020.2 and crashes it same way probably due to python3.5 used in our Domoticz.

Test latest build.
I have updated to Python 3.7.7.
BTW. This packages are with full Python package and is much larger.
Not tested plugins because I don't use python plugins.
Please test..

Not all packages is updated yet.
http://www.jadahl.com/domoticz_2020.2_python_6.2/

whoami wrote: ↑Tuesday 08 September 2020 15:21 Hi there, just update my synology from DS218 to DS220+, but I can not find the package...
Is ther not a package yet? Otherwise I did not bought another one

eSbek wrote: ↑Tuesday 08 September 2020 19:17 @Jumbotroll
So I found that a python3.7 is located in domoticz lib folder (unlike 2020.1 where the system python was used).
My plugins didnt want to work as domoticz couldnt find dependencies installed in my DSM python (also 3.7.7).
The workaround was to rename domoticz python3.7 folder to python3.7_bak (just in case instead of deleting it) and just copy my python3.7 folder with all site packages from the /volume1/@appstore. Modbus can read and write registers.
Is there a way to use system modbus like before (was Domoticz somehow pointing to system python?)

eSbek wrote: ↑Wednesday 09 September 2020 12:45 OK, I got the solution.
1. Remove any Python3 you have installed in the DSM.
2. as you have Python3.7.7 in domoticz just add the bin folder to the PATH:
Edit etc/profile file and add to PATH "/volume1/@appstore/python3/usr/bin/", it should look like that
"PATH=/volume1/@appstore/domoticz/bin:"

To apply the above run the command: sudo source /etc/profile

Now you can type python3 or python3 -V in terminal, it should run python3.7.7 or show you the version 3.7.7 if you used python3 -V command

Now you can install pip (curl -k https://bootstrap.pypa.io/get-pip.py | python3) and all you need....

My domoticz log doesn't show any more errors related to python anymore.
Also I can run any python.py scripts from the cron using Python3.7.7
PS. for the cron I had to edit crontab file (etc/crontab) and add python Path "PATH=/volume1/@appstore/domoticz/bin"