Re: Domoticz Google Assistant integration with node-red Easy Free Controlicz alternative!
Posted: Saturday 10 October 2020 15:24
by FireWizard
Hi,
@salvacalatayud
@EvJd
The posted issues look similar.
I suspect that messages do not come through, as the the created array might not be correct.
I do not see it in my system, but the cause might be that my system is a single threaded device.
I expected that the main path is faster and so arrives earlier than the path through the Function Node and the HSV > RGB node
That means that the main path is in array[0] and the RGB info in array[1]. If coincidentally it is the other way around the Function node will fail to execute the code.
Therefore I took the code, published by @xury, February 12, 2020, at page 4 in this thread. Similar code I also found in another Javascript forum
I modified both Function nodes and inserted the code in the Function node:
To test:
Remove
- Remove Function node: Create RGB array
- Remove Conversion node: RGB > HSV
- Remove join node
Replace Fucntion In, by new Function node with the following code.
Code: Select all
msg.topic = msg.payload.idx;
function rgb2hsv (r, g, b) {
let rabs, gabs, babs, rr, gg, bb, h, s, v, diff, diffc, percentRoundFn;
rabs = r / 255;
gabs = g / 255;
babs = b / 255;
v = Math.max(rabs, gabs, babs);
diff = v - Math.min(rabs, gabs, babs);
diffc = c => (v - c) / 6 / diff + 1 / 2;
percentRoundFn = num => Math.round(num * 100) / 100;
if (diff === 0) {
h = s = 0;
} else {
s = diff / v;
rr = diffc(rabs);
gg = diffc(gabs);
bb = diffc(babs);
if (rabs === v) {
h = bb - gg;
} else if (gabs === v) {
h = (1 / 3) + rr - bb;
} else if (babs === v) {
h = (2 / 3) + gg - rr;
}
if (h < 0) {
h += 1;
}else if (h > 1) {
h -= 1;
}
}
return {
hue: Math.round(h * 360),
saturation: percentRoundFn(s),
value: percentRoundFn(v)
};
}
if (typeof msg.payload.Color === 'undefined') {
msg.payload.color = {};
}
if (msg.payload.nvalue !== 0) {
msg.payload = {
on : true,
brightness : msg.payload.Level,
color : { spectrumHsv : rgb2hsv(msg.payload.Color.r,msg.payload.Color.g,msg.payload.Color.b)}
}
}
else if (msg.payload.nvalue === 0) {
msg.payload = {
on : false,
brightness : msg.payload.Level,
color : { spectrumHsv : rgb2hsv(msg.payload.Color.r,msg.payload.Color.g,msg.payload.Color.b)}
}
}
return msg;
Do the same with:
Remove
- Remove Function node: Create HSV array
- Remove Conversion node: HSV > RGB
- Remove join node
Replace Function Out, by new Function node with the following code.
Code: Select all
var idx = parseInt(msg.topic);
var cc = {};
function mix(a, b, v)
{
return (1-v)*a + v*b;
}
function HSVtoRGB(H, S, V)
{
var V2 = V * (1 - S);
var r = ((H>=0 && H<=60) || (H>=300 && H<=360)) ? V : ((H>=120 && H<=240) ? V2 : ((H>=60 && H<=120) ? mix(V,V2,(H-60)/60) : ((H>=240 && H<=300) ? mix(V2,V,(H-240)/60) : 0)));
var g = (H>=60 && H<=180) ? V : ((H>=240 && H<=360) ? V2 : ((H>=0 && H<=60) ? mix(V2,V,H/60) : ((H>=180 && H<=240) ? mix(V,V2,(H-180)/60) : 0)));
var b = (H>=0 && H<=120) ? V2 : ((H>=180 && H<=300) ? V : ((H>=120 && H<=180) ? mix(V2,V,(H-120)/60) : ((H>=300 && H<=360) ? mix(V,V2,(H-300)/60) : 0)));
return {
r : Math.round(r * 255),
b : Math.round(b * 255),
g : Math.round(g * 255)
};
}
//msg.payload.color = HSVtoRGB(msg.payload.color.spectrumHsv.hue, msg.payload.color.spectrumHsv.saturation, msg.payload.color.spectrumHsv.value);
//cc = HSVtoRGB(msg.payload.color.spectrumHsv.hue, msg.payload.color.spectrumHsv.saturation, msg.payload.color.spectrumHsv.value);
if ( msg.payload.on === true )
{
msg.payload = {
"command" : "setcolbrightnessvalue",
"idx" : idx,
"brightness" : msg.payload.brightness,
"color" : {...{"m":3,"t":0,"cw":0,"ww":0},...HSVtoRGB(msg.payload.color.spectrumHsv.hue, msg.payload.color.spectrumHsv.saturation, msg.payload.color.spectrumHsv.value)}
};
}
else if ( msg.payload.on === false )
{
msg.payload = {
"command": "switchlight",
"idx": idx,
"switchcmd": "Off"
};
}
return msg
Line 32 contains an error message, I cannot find yet.
Has something to do with merging two objects into one object, but the desired result is produced. So it works.
Awaiting the test results.
Regards
Re: Domoticz Google Assistant integration with node-red Easy Free Controlicz alternative!
Posted: Monday 08 March 2021 6:09
by edwin1234
Its a tuya radiator valve, you can set temp higher and lower has indeed automode etc, dont need all settings in google home but jus the basic ones. and this is a copy of mqtt.
Thanks for your help.
Radiator valve with thermostat","exposes":[{"features":[{"access":3,"description":"Enables/disables physical input on the device","name":"state","property":"child_lock","type":"binary","value_off":"UNLOCK","value_on":"LOCK"}],"type":"lock"},{"features":[{"access":3,"description":"Enables/disables window detection on the device","name":"state","property":"window_detection","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"}],"type":"switch"},{"access":1,"description":"Indicates if the battery of this device is almost empty","name":"battery_low","property":"battery_low","type":"binary","value_off":false,"value_on":true},{"features":[{"access":3,"name":"state","property":"valve_detection","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"}],"type":"switch"},{"access":1,"description":"Position","name":"position","property":"position","type":"numeric","unit":"%"},{"features":[{"access":3,"description":"Temperature setpoint","name":"current_heating_setpoint","property":"current_heating_setpoint","type":"numeric","unit":"°C","value_max":35,"value_min":5,"value_step":0.5},{"access":1,"description":"Current temperature measured on the device","name":"local_temperature","property":"local_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Mode of this device","name":"system_mode","property":"system_mode","type":"enum","values":["heat","auto","off"]},{"access":1,"description":"The current running state","name":"running_state","property":"running_state","type":"enum","values":["idle","heat"]},{"access":3,"description":"Offset to be used in the local_temperature","name":"local_temperature_calibration","property":"local_temperature_calibration","type":"numeric","unit":"°C"},{"access":3,"description":"Away mode","name":"away_mode","property":"away_mode","type":"binary","value_off":"OFF","value_on":"ON"},{"access":3,"description":"Mode of this device (similar to system_mode)","name":"preset","property":"preset","type":"enum","values":["schedule","manual","boost","complex","comfort","eco"]}],"type":"climate"},{"features":[{"access":3,"description":"Enable/disable auto lock","name":"state","property":"auto_lock","type":"binary","value_off":"MANUAL","value_on":"AUTO"}],"type":"switch"},{"features":[{"access":3,"description":"Enable/disable away mode","name":"state","property":"away_mode","type":"binary","value_off":"OFF","value_on":"ON"}],"type":"switch"},{"access":3,"description":"Away preset days","name":"away_preset_days","property":"away_preset_days","type":"numeric"},{"access":3,"description":"Boost time","name":"boost_time","property":"boost_time","type":"numeric","unit":"s"},{"access":3,"description":"Comfort temperature","name":"comfort_temperature","property":"comfort_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Eco temperature","name":"eco_temperature","property":"eco_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Force the valve position","name":"force","property":"force","type":"enum","values":["normal","open","close"]},{"access":3,"description":"Maximum temperature","name":"max_temperature","property":"max_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Minimum temperature","name":"min_temperature","property":"min_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Week format user for schedule","name":"week","property":"week","type":"enum","values":["5+2","6+1","7"]},{"access":3,"description":"Away preset temperature","name":"away_preset_temperature","property":"away_preset_temperature","type":"numeric","unit":"°C"},{"access":1,"description":"Link quality (signal strength)","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"TS0601_thermostat","supports_ota":true,"vendor":"TuYa"},"endpoints":{"1":{"bindings":[],"clusters":{"input":["genBasic","genGroups","genScenes","manuSpecificTuya"],"output":
Re: Domoticz Google Assistant integration with node-red Easy Free Controlicz alternative!
Posted: Monday 08 March 2021 16:51
by FireWizard
Hello @edwin1234
Is this really produced by 1 thermostat????
I don't think that the message is correct, as it ends with:
"output":
Is it possible for you to install MQTT Explorer (
http://mqtt-explorer.com/) and publish a screenshot of what you see regarding this thermostat.
And if you copy such code into a post please use </> so that it looks like:
Code: Select all
[{"features":[{"access":3,"description":"Enables/disables physical input on the device","name":"state","property":"child_lock","type":"binary","value_off":"UNLOCK","value_on":"LOCK"}],"type":"lock"},{"features":[{"access":3,"description":"Enables/disables window detection on the device","name":"state","property":"window_detection","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"}],"type":"switch"},{"access":1,"description":"Indicates if the battery of this device is almost empty","name":"battery_low","property":"battery_low","type":"binary","value_off":false,"value_on":true},{"features":[{"access":3,"name":"state","property":"valve_detection","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"}],"type":"switch"},{"access":1,"description":"Position","name":"position","property":"position","type":"numeric","unit":"%"},{"features":[{"access":3,"description":"Temperature setpoint","name":"current_heating_setpoint","property":"current_heating_setpoint","type":"numeric","unit":"°C","value_max":35,"value_min":5,"value_step":0.5},{"access":1,"description":"Current temperature measured on the device","name":"local_temperature","property":"local_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Mode of this device","name":"system_mode","property":"system_mode","type":"enum","values":["heat","auto","off"]},{"access":1,"description":"The current running state","name":"running_state","property":"running_state","type":"enum","values":["idle","heat"]},{"access":3,"description":"Offset to be used in the local_temperature","name":"local_temperature_calibration","property":"local_temperature_calibration","type":"numeric","unit":"°C"},{"access":3,"description":"Away mode","name":"away_mode","property":"away_mode","type":"binary","value_off":"OFF","value_on":"ON"},{"access":3,"description":"Mode of this device (similar to system_mode)","name":"preset","property":"preset","type":"enum","values":["schedule","manual","boost","complex","comfort","eco"]}],"type":"climate"},{"features":[{"access":3,"description":"Enable/disable auto lock","name":"state","property":"auto_lock","type":"binary","value_off":"MANUAL","value_on":"AUTO"}],"type":"switch"},{"features":[{"access":3,"description":"Enable/disable away mode","name":"state","property":"away_mode","type":"binary","value_off":"OFF","value_on":"ON"}],"type":"switch"},{"access":3,"description":"Away preset days","name":"away_preset_days","property":"away_preset_days","type":"numeric"},{"access":3,"description":"Boost time","name":"boost_time","property":"boost_time","type":"numeric","unit":"s"},{"access":3,"description":"Comfort temperature","name":"comfort_temperature","property":"comfort_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Eco temperature","name":"eco_temperature","property":"eco_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Force the valve position","name":"force","property":"force","type":"enum","values":["normal","open","close"]},{"access":3,"description":"Maximum temperature","name":"max_temperature","property":"max_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Minimum temperature","name":"min_temperature","property":"min_temperature","type":"numeric","unit":"°C"},{"access":3,"description":"Week format user for schedule","name":"week","property":"week","type":"enum","values":["5+2","6+1","7"]},{"access":3,"description":"Away preset temperature","name":"away_preset_temperature","property":"away_preset_temperature","type":"numeric","unit":"°C"},{"access":1,"description":"Link quality (signal strength)","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"TS0601_thermostat","supports_ota":true,"vendor":"TuYa"},"endpoints":{"1":{"bindings":[],"clusters":{"input":["genBasic","genGroups","genScenes","manuSpecificTuya"],"output":
[Added} Is this your thermostat?
https://www.zigbee2mqtt.io/devices/TS06 ... ostat.html
Can you tell me what data you want to access? Temperature, Setpoint and Mode are supported.
Setpoint and Temperature are in degreees Celsius.
For Mode you can have heat, cool, heatcool, auto, fan-only, purifier, eco and dry. What is supported?
What is your "Friendly Name"?
Regards
