Domoticz

startfish wrote: Tuesday 29 May 2018 22:16 Hello Jumbotroll ! I'm very interested in use Domoticz in my Synology. I'm using V 6.2 (last one) and I have a DS215j model (it's a MARVELL Armada 375 88F6720). Please could you compile for this version?

Thanks for your help

jumbotroll wrote: Sunday 27 May 2018 20:16

PieterS wrote: Sunday 27 May 2018 19:52 Thanks for fast reply.

Choosed to install the package with version 7.70 but that installed nmap. No errors during installation.

My scripts uses nc-command and that is not found when I run that in putty.

I am not very fimiliar with Linux so I give it a try later on this week.
Or try a workaround in the virtual Windows machine that I can run on the new DS718.

The nmap package does not support nc command.
The Netcat package does, so why don't you install both packages

PieterS wrote: Wednesday 30 May 2018 16:00

jumbotroll wrote: Sunday 27 May 2018 20:16

PieterS wrote: Sunday 27 May 2018 19:52 Thanks for fast reply.

Choosed to install the package with version 7.70 but that installed nmap. No errors during installation.

My scripts uses nc-command and that is not found when I run that in putty.

I am not very fimiliar with Linux so I give it a try later on this week.
Or try a workaround in the virtual Windows machine that I can run on the new DS718.

The nmap package does not support nc command.
The Netcat package does, so why don't you install both packages

Sorry, don''t understand your answer.
My question was to get a version of NetCat for DSM 6.1 so that I can use the NC command. You delivered me NMap.
You write that the Netcat package does support nc; I know.. that's why I asked for Netcatpackage...

How do I install both packages if I got one?

PieterS wrote: Wednesday 30 May 2018 16:40 Sorry!!! Missed that specific file!

Installed and works as usual! Thnx

neuros wrote: Sunday 06 May 2018 21:06

jumbotroll wrote: Sunday 06 May 2018 17:34

neuros wrote: Sunday 06 May 2018 14:13 @jumbotroll

I'm using DSM 6.2-23648 on my DS918+. The kernel is
Linux DS918 4.4.59+ #23648 SMP PREEMPT Sat Mar 17 02:57:07 CST 2018 x86_64 GNU/Linux synology_apollolake_918+

With the latest domoticz_apollolake-6.2_3.0.9317-7.spk the serial modules wont load:
cp210x: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '
[ +0.014012] pl2303: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '
[ +0.012783] ch341: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '
[ +0.012727] ti_usb_3410_5052: version magic '4.4.59 SMP preempt mod_unload ' should be '4.4.59+ SMP preempt mod_unload '

Could you update the serialdrivers for this kernel?

Please test the latest beta build domoticz_apollolake-6.2_3.0.9390-7.spk
and give feedback.

With the domoticz_apollolake-6.2_3.0.9390-7.spk build the serial modules load normally except for the first line 'module verification failed..." I don't know what it means - however the cp210x module works.

Spoiler: show

[May 6 19:32] cp210x: module verification failed: signature and/or required key missing - tainting kernel
[ +0.010768] usbcore: registered new interface driver cp210x
[ +0.006291] usbserial: USB Serial support registered for cp210x
[ +0.006668] cp210x 1-3:1.0: cp210x converter detected
[ +0.005785] usb 1-3: cp210x converter now attached to ttyUSB0
[ +0.009077] usbcore: registered new interface driver pl2303
[ +0.006306] usbserial: USB Serial support registered for pl2303
[ +0.009563] usbcore: registered new interface driver ch341
[ +0.006187] usbserial: USB Serial support registered for ch341-uart
[ +0.010182] usbcore: registered new interface driver ti_usb_3410_5052
[ +0.007288] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ +0.008621] usbserial: USB Serial support registered for TI USB 5052 2 port adapter

Thanks for the update!!

Bryx wrote: Thursday 31 May 2018 13:54 Hello !
Above all, thank you for this titanic work!

With my Syno DS418J, recently updated with DSM 6.2-23739, I have exactly the same "magic version 4.4.59 SMP ..." problem when I plug in my RFLink and CH340 using this version of Domoticz: domoticz_rtd1296 -6.2_3.0.9521-7.spk
Yet everything else works perfectly on Domoticz except the serial drivers.
The CPU architecture of the DS418J is actually the Realtek RTD1293 and not the RTD1296. Could this be a problem?

I only recently received my RFLink and therefore not tested with DSM 6.1

I thank you in advance for your response

I have compiled a new beta version with driver fix..
This should work, please test and give feedback.
domoticz_rtd1296-6.2_3.0.9541-7.spk

Bryx wrote: Thursday 31 May 2018 15:58

I have compiled a new beta version with driver fix..
This should work, please test and give feedback.
domoticz_rtd1296-6.2_3.0.9541-7.spk

Oh yes it works perfectly! Sooooo fast! I thank you so much !!

nixalsschrott wrote: Thursday 07 June 2018 10:18 For ds214play do I need to upgrade to version 6.2?
If so, is it possible do update manually from 6.1 version to 6.2 or is complete reinstall necessary?
Kind regards Matty

schumi2004 wrote: Thursday 14 June 2018 12:52 @jumbotroll

Could you compile the latest beta for my system (DS715 / Alpine / DSM6.2 with Python)?
Currently i have version v3.9613 running and i'm curious if a issue i have with a Dummy RGBWW switch and a few sub/slave Yeelight bulbs added wil be resolved.
Currently they are doing nothing.
I also read a few pages back you suggest to remove stable version when installing 6.2 beta? I didn't because i wasn't aware of it but everything runs smooth (except for the dummy switch yeelight slave thing) should i still start from scratch and import DB again, will that resolve my issue or is it a bug?