Domoticz

igor wrote: ↑Saturday 06 November 2021 2:36

boe666 wrote: ↑Wednesday 03 November 2021 2:22 Can U send the defice type working witch thermostat module in HomeHabit ?

There is no one-to-one matching list of supported devices with Domoticz. Because many type/subtype values are brand specific, HomeHabit works by finding common values and determining type from that.
For thermostat mode specifically, HomeHabit internal structure is a selector with auto/heat/cool/off values. Since Domoticz does not have a common type for that, it is not possible to match.
I'm not sure why Domoticz does not use specific thermostat mode/state types, since it would be easy to support it then.

waltervl wrote: ↑Thursday 04 November 2021 15:29 So if Homehabit cannot find the appropriate devices it should list all devices and let us users decide what the correct device is for eg Fan speed and heat/cool/dry mode etc
But Igor has problems in getting the correct devices from Domoticz and the value format for each device. I also already suggested to help by updating the wiki. But if no reaction from Igor I cannot help

In general, the app is very flexible in how devices can be mapped when data is processed - as long as there is something that uniquely identifies the type. Unless I'm missing something, there is nothing that identifies thermostat mode device specifically in API.

waltervl wrote: ↑Wednesday 03 November 2021 7:31 How do you communicate with Domoticz? With the http Json API? Which API functions do you use to get data?
I would be glad to help extending the API documentation.

It is not only issue of documentation, but also the API format itself. Type/Subtype/SwitchType are used in many different ways (and other boolean flags), that are not always match the real device. There are many devices that are not a dimmer, but return "HaveDimmer" as true, or SwitchType having contact sensor value or similar.

JSON API is used to get the data (not using websocket):
load data from "json.htm?type=devices&filter=all&used=true"
update data from "json.htm?type=devices&filter=all&used=true&lastupdate="

igor wrote: ↑Saturday 06 November 2021 2:38

boe666 wrote: ↑Friday 05 November 2021 8:18 In new version was a changes with dimmers ?
I use this for a blinds - and now it's work strange - i have no status o blinds - always is open - but working fine. Domoticz show percent fine, same as on-off reaction.

Hmm, there was no recent changes for Domoticz dimmers. Can you describe behavior in more details?

waltervl wrote: ↑Saturday 06 November 2021 10:38 Blinds:
In Beta Domoticz there are recent changes in blinds behavior due to MQTT Autodiscover function!

Thermostat devices.
@Igor, I send you my list of devices some time ago. In Domoticz they are stored as a selector switch: Type 244 subtype 62. Couldn't you find those?

boe666 wrote: ↑Saturday 06 November 2021 16:37 I create device:
222|36|0001412E|1|Thermostat mode|1|244|62|18|0|12|255|0|0|2021-11-06 07:58:45|222|0.0|1.0|0.0|1.0|||0|0|0||LevelNames:T2ZmfExldmVsMXxMZXZlbDJ8TGV2ZWwz;SelectorStyle:MA==|

Type244, SType62, auto/cool/heat/off - selector. HH donesn't see this in Thermostat. HH see tis as scene only.
But i think not Type and Stype is mandatory for HH, the sValue is more important - I don;t know why...

/json.htm?type=devices&rid=[device_id]

boe666 wrote: ↑Saturday 06 November 2021 8:10

igor wrote: ↑Saturday 06 November 2021 2:38

boe666 wrote: ↑Friday 05 November 2021 8:18 In new version was a changes with dimmers ?
I use this for a blinds - and now it's work strange - i have no status o blinds - always is open - but working fine. Domoticz show percent fine, same as on-off reaction.

Hmm, there was no recent changes for Domoticz dimmers. Can you describe behavior in more details?

I have a mysensors node for blinds (my own sketch), it work as inverted blinds in domoticz. There is 2 buttons (close/open) and slider 0-100%. In domoticz it's work fine. In HomeHabit i have 2 widget for one blind. 1 - as button On/Off and 2 - as a slider (blind position). Since last update HH it worked fine, but now, when I push the button - the button turn to off, the slider go to 0% and after 2 seonds - button is on and slider is 100% and my blind closed - so HH report open blind , and the blind are close - so I cant open blind because HH heve information - blind are open. In domoticz buttons and sliders works fine.

 2024-01-21 09:31:45.458 Status: [web:8080] Incoming connection from: 2a01:e0a:3fc:9820:ac12:4dbb:62b4:a8a
2024-01-21 09:31:53.179 [WebServer] Deprecated RType (devices) for API request. Handled via fallback (getdevices), please use correct API Command! (::1) 

For users using API calls from outside Domoticz there has been some changes in API calls. They now always should be of the form /json.htm?type=command&param=**command**

For example

Code: Select all

/json.htm?type=graph will be /json.htm?type=command&param=graph

/json.htm?type=devices will be /json.htm?type=command&param=getdevices

More info in Forum topic viewtopic.php?p=303581#p303581

The following old RType commands will keep working but will give a deprecation warning eg

Code: Select all

[WebServer] Deprecated RType (devices) for API request. Handled via fallback (getdevices), please use correct API Command! (IP nnn.nnn.nnn.nnn) 

waltervl wrote: ↑Monday 05 May 2025 10:22 Note to all HomeHabit users: updating to the today released stable 2025.1 will result in a not working HomeHabit dashboard!!!!

This has been reported to HomeHabit but unfortunately no response (development of this app has been non existing the last year) https://community.homehabit.app/t/domot ... cting/3563