Domoticz

Cannot open the setting anymore

Maikie wrote:Cannot open the setting anymore

Please add bug-reports, instead of here in the forum.

Thank you very much for update the camera. It works very well.

andi216 wrote:Thank you very much for update the camera. It works very well.

NP

Hi, no screen settings appear to me. and nothing appen if I click on settings icon on top right

marcotrumpet wrote:Hi, no screen settings appear to me. and nothing appen if I click on settings icon on top right

https://github.com/safi78/framb0ise/issues

jvdz wrote:

tontze wrote: Blinds still dotn have control over it, i have "blinds inverted" control

I am sure you'll be able to figure this out when looking at the change I made what needs to be done.
I don't have any inverted blinds to test with.

Jos

Please give the current version a try as I have added the basic support for all Blinds types, but don't have all devices available for testing so don't know whether the directions are right and possibly are requiring a stop button.

Jos

My cams not visible

my cams is:
http://192.168.1.161:8085/snapshot
http://192.168.1.162:8086/snapshot

kniazio wrote:My cams not visible

Post an issue in GITHUB when you have an issue to report: https://github.com/safi78/framb0ise/issues
.. and don't forget to post the DOMOTICZ config details of one of the camera's so it can be checked what the root cause could be.

Jos

jvdz wrote:

jvdz wrote:

tontze wrote: Blinds still dotn have control over it, i have "blinds inverted" control

I am sure you'll be able to figure this out when looking at the change I made what needs to be done.
I don't have any inverted blinds to test with.

Jos

Please give the current version a try as I have added the basic support for all Blinds types, but don't have all devices available for testing so don't know whether the directions are right and possibly are requiring a stop button.

Jos

Nice ! Works fine. THNX ! But another thing came up, in one roomplan all doubled ? :

Please post your issue in GITHUB so we can keep track of them: https://github.com/safi78/framb0ise/issues
In this case add the result of the following url so we can see which device are defined in the room:
http://192.168x.x:8080/json.htm?type=co ... vices&idx=1
Change the red number in that request to the correct roomnumber and of course the appropriate IP:PORT.

Jos

Hi Guys,

Just released a new version (we are now working in 2 branches, master & development).

New functionality will be added to the development-branche first, tested & then released.

New stuff:
1. Option to save settings to Domoticz or just local. (credits: jvdz) This is very nice if you have more devices, e.g. laptop & iPad. You can configure framb0ise on your laptop (easier) and later import these settings on your iPad so you don't have to fiddle around with the small keyboard
Also, this can keep your settings synchronized throughout all your devices.
You can always choose to store settings locally if you want variations in your settings on a 'per device'-basis.
Because this is a great overhaul of the settings-store function, if you run into problems from a previous version, just clear your local cache / remove localStorage stuff, framb0ise will 'kick in' from there.
Try it out, let us know what you think!

2. Weather Widget (Darksky) with weekly-predication. Hover your mouse over the 'title' of the widget to see the temp-predictions for the next week.
I chose to go for this approach, to keep the widget clean & tidy, but the extra information is there on demand. Check it out, let me know if you like it

3. Weathermap Widget (Buienradar) rain prediction. If rain is predicted, the title will turn to 'orange' as a warning, and tell you the 'from' and 'to' times to bring an umbrella.
This is based on your latitude / longitude location from domoticz, so make sure these are accurate for you to give you the best experience.

As always:
1. Feedback is very welcome in this thread
2. Bugs & Feature requests are only picked up from: https://github.com/safi78/framb0ise/issues
Please, send the bugs / requests to meantioned url, this is so much easier to keep track, in stead of PM's or in this thread.

Thanks!

Is it as designed or a bug that device with a $ in front don't show up in framb0ise anymore?

Maikie wrote:Is it as designed or a bug that device with a $ in front don't show up in framb0ise anymore?

Designed. And it's not 'anymore', it was actually 'never'

We follow Domoticz 'guidelines'. $ is intended to make rooms hidden in the GUI and so it works in framb0ise, like it says in the instructions:

# How to order stuff around
Everything is based on the 'room-plan' inside domoticz.

So if you change the order of the rooms, or the order of the devices in that rooms, framb0ise will use that accordingly.

If you don't want a room to show up in framb0ise, but don't want to delete it in domoticz either, just add a '$' to the room name in domoticz. This will 'hide' the room. (I use this for my homebridge stuff for example.)

safi78 wrote:

Maikie wrote:Is it as designed or a bug that device with a $ in front don't show up in framb0ise anymore?

Designed. And it's not 'anymore', it was actually 'never'

We follow Domoticz 'guidelines'. $ is intended to make rooms hidden in the GUI and so it works in framb0ise, like it says in the instructions:

# How to order stuff around
Everything is based on the 'room-plan' inside domoticz.

So if you change the order of the rooms, or the order of the devices in that rooms, framb0ise will use that accordingly.

If you don't want a room to show up in framb0ise, but don't want to delete it in domoticz either, just add a '$' to the room name in domoticz. This will 'hide' the room. (I use this for my homebridge stuff for example.)

Strange because it worked for me until I just updated again. To be clear, I don't mean $in front of a room name but in front of devices.

Maikie wrote:

safi78 wrote:

Maikie wrote:Is it as designed or a bug that device with a $ in front don't show up in framb0ise anymore?

Designed. And it's not 'anymore', it was actually 'never'

We follow Domoticz 'guidelines'. $ is intended to make rooms hidden in the GUI and so it works in framb0ise, like it says in the instructions:

# How to order stuff around
Everything is based on the 'room-plan' inside domoticz.

So if you change the order of the rooms, or the order of the devices in that rooms, framb0ise will use that accordingly.

If you don't want a room to show up in framb0ise, but don't want to delete it in domoticz either, just add a '$' to the room name in domoticz. This will 'hide' the room. (I use this for my homebridge stuff for example.)

Strange because it worked for me until I just updated again. To be clear, I don't mean $in front of a room name but in front of devices.

I see,

hmm, dunno, my first code didn't do anything specific with $devices. Coulde be that it worked then. After that jvdz added some more clever stuff to fix the order of things, maybe he filtered out the $devices.

In any case, my opinion is that is works like it should be, $ = hidden. Agree?

Hi,
In Settings you can add a Iframe empty url for various?

andi216 wrote:Hi,
In Settings you can add a Iframe empty url for various?

How did you get this great weather system

I like the simple way the system is built, but, my eyes seemed essential as it's results, is a bit small.
How can I highlight, temperature, wind and ppm as well as all the other results.
How do I convert km/h to m/s

@bimse
You can edit your widget yourself.
https://www.yourweather.co.uk/widget/