Wat werkt er nog niet
Om het risico op overbelasting zoveel mogelijk te beperken hebben we twee functies nog niet weer geactiveerd:
Domoticz: Domoticz gebruikers hebben continue een verbinding met ons service center (een mobiele app maar ongeveer één minuut) en geven daarom een relatief zeer grote belasting op onze servers. Om te voorkomen dat mobiele app gebruikers geen toegang krijgen vanwege deze kleine groep hebben we voorlopig de toegang voor jullie nog geblokkeerd.
Vergelijk functie: De vergelijk functie veroorzaakt bij ons een grote belasting op onze DNS servers. Omdat we verwachten dat klanten het functioneren van de mobiel app belangrijker vinden dan resultaten van de vergelijk functie, hebben we deze voor dit weekend uitgeschakeld. We verwachten begin deze week weer te kunnen activeren.
Dat is nou een van de redenen waarom het zo belangrijk is dat de Toon ook via het inerne netwerk uitgelezen moet kunnen worden ipv via hun servers.
Ik denk toch aan een andere thermostaat.
On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
Best regards Bert
Synology DS1517+ - DSM 6.2
Raspberry PI2-B, Raspberry Nano - Raspberry PI3 - model B
Xiaomi Gateway - Philips HUE Lights - Zwave - RFXCom(E) with KaKu and other 433MHz devices - Yeelight Lights - Toon
bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
If I change my thermostat I would buy a ThermoSmart one.
bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
What is the advantage of changing the thermostat? I can adjust the temperature with my https://Toonopafstand.eneco.nl. I would think it is more useful if the Domoticz server can directly grab data from the P1. So: let Domoticz and Toon communicate over the local network if I want to.
Or perhaps allow my Domoticz machine to get data directly from the Eneco interface that is connected to the P1. As I understand it: the Eneco interface and the Toon communicate directly and the data is then sent to the service center. All apps get the data from the service center.
bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
What is the advantage of changing the thermostat? I can adjust the temperature with my https://Toonopafstand.eneco.nl. I would think it is more useful if the Domoticz server can directly grab data from the P1. So: let Domoticz and Toon communicate over the local network if I want to.
Or perhaps allow my Domoticz machine to get data directly from the Eneco interface that is connected to the P1. As I understand it: the Eneco interface and the Toon communicate directly and the data is then sent to the service center. All apps get the data from the service center.
I don't want to adjust the temperature with an app or what so ever. In my system I programmed a whole lot of logic how the temeperature should be depending on the stat of the household. So I need to be able to set a thermostat from within the domoticz program. Hope this answer your question.
Best regards Bert
Synology DS1517+ - DSM 6.2
Raspberry PI2-B, Raspberry Nano - Raspberry PI3 - model B
Xiaomi Gateway - Philips HUE Lights - Zwave - RFXCom(E) with KaKu and other 433MHz devices - Yeelight Lights - Toon
Just installed the latest beta....unfortunately it looks like it's still not really polling my Toon data ☹
Same here. Interesting part if that it was working until around 19:00 last night and then started to generate errors. From my error log:
2016-10-21 08:41:21.653 Error: ToonThermostat: Error getting current state!
2016-10-21 08:47:05.439 Error: ToonThermostat: Error getting current state!
2016-10-21 08:48:32.888 Error: CheckAuthToken(831a....[removed detail]....) : session id not found
In addition, I tried to login to the Toon app this morning, and it told me that I could not login in as 4 devices were already logged in. I wonder if Eneco has made yet another 'fix' somewhere that has caused this problem. I can change my Setpoint & Off/Away/Sleeping/Home/Comfort which all still seem to work, just cannot get any meter readings from either electric or gas
I just cannot comprehend Eneco developers using the Production environment as one large beta.... I think the first focus now should be on rolling back some of the updates and start building stuff again from there.