RFlink might support Mi-light and other protocols soon :)

[Stuntteam]

Sorry for not being clear.
Please go to http://www.nemcon.nl/blog2/faq and check the section named "RFlink with NRF24L01:"
Ask if it is not clear and I will do my best to add some more info.

[burton666]

Ahh, now I managed to pair a bulb. But I still have some problems, the colors are not "correct" and I am unable to turn the bulb off. Also I often have to select a color multiple times for it to change.

And a new question, If I pair a bulb with some random ID and then remove the bulb from domoticz. Can I still unpair it without knowing the bulb id ?

[deennoo]

About unpairing : no you need id, RFLink is the same as a remote, if you don't have it you can't unpair.

[Stuntteam]

in theory you could unpair it by guessing the id.. however.. it will take a long time to try all 65536 ID's

[Redferne]

Sorry for not being clear.
Please go to http://www.nemcon.nl/blog2/faq and check the section named "RFlink with NRF24L01:"
Ask if it is not clear and I will do my best to add some more info.

How to enable milight and nodonrf from linux?

Sent from my SM-G930F using Tapatalk

[bizziebis]

So it's not possible to make the the SPI interfaces swappable in the firmware so we could use the onboard header if NODO is not used? I'm now in the situation that I cannot send/receive Mii light signals.
So my possible problems:
* Bad wiring (swapped)
* Bad connection (high impendance)
* Bad power supply
* Dodgy NRF24L01 board
* Not correctly activated in the Rflink configurator
* RF noise

The first 3 issues could be avoided by using the onboard header.

So I know what to do this sunday
I think I will kill my MySensor setup to salvage the NRF board, one less variable in the mix.

Edit:
Ok so I got it to work by using the power from the NODO NRF interface header and a new NRF24L01 board.

The RGBW function isn't quite working like it should. When I make a scene with 2 lights which I set to RGBW, and two which I set to RGB. Only one RGB light switches on with a color I didn't set.

The exact same setup wit the mii light wifi bridge works great. So it mus be sending more information to each light?

[Stuntteam]

We will check that..

[bizziebis]

Thanks, if you need more information or some testing, please let me know.

[deennoo]

Thanks, if you need more information or some testing, please let me know.

Does your rflink is near the milight bridge ?

On m'y case RFLink is not central as the milight gateway, i ve to send order twice to light on/off or change color to m'y farest bulb.

[bizziebis]

They are 30 cm from eachother. The distance is not a problem.

It's not only in a scene I see now. When I switch on a light and afterwards a second light, they both change to the same color and when I move the slider the brightness of them both changes.

Maybe I have to pair them again using different ID's, and not only different zones. Looks like there is my problem now.

[deennoo]

This is rbg bulb or rgbw ones ?

Got 10 rgbw Bulbs, on 6 group, 4 got the same group and id drive by a scène and set as rgbw dimmer, 2 others got same group & id set as on/off, other are individual group and id as on/off.

For those 4 who are driven by a scène no problème on color drive or dimmer set.

[DanM]

Given that the NRF24L01 connects directly to the mega, is a RFLink Gateway board required at all if you only want to control milights?

[Stuntteam]

No, you can use just the milight part..
but while you are at it.. you might want to wire a cheap RF receiver as well, it is so much more fun

[Larsja]

Any tips on how to add my milight led controler fut038 to domoticz? I dont have a remote and i cant seem to find the create RFlink device everyone is talking about
Running on a rpi2 and version 3.4834 of domoticz

[Raspberry Piet]

It's not only in a scene I see now. When I switch on a light and afterwards a second light, they both change to the same color and when I move the slider the brightness of them both changes.

I experience this same behaviour with mine.

Any tips on how to add my milight led controler fut038 to domoticz? I dont have a remote and i cant seem to find the create RFlink device everyone is talking about
Running on a rpi2 and version 3.4834 of domoticz

Need to update to beta release or wait for new stable version of Domoticz.

[Stuntteam]

If you already have a recent beta, you might want to check with a different browser.. it seems the Domoticz buttons are not always shown depending on the browser type.

We are looking into the color/brightness issue..

[bibo456]

Hello everybody,

I have RGB strip led, and soon RGBW strip led, and are interested by your mi-light support.
My question is what HW do I need besides the RFlink I already have ?
Just a controller :
http://www.aliexpress.com/item/1pcs-dc1 ... 77760.html
or this :
http://www.aliexpress.com/item/2015-new ... 33255.html

Thank you for your feedback,

Last question, the controller can drive RGBW and RGB strip led ?

[Stuntteam]

Only the first I think.
The second is a wifi bridge.. RFlink is a serial bridge but in combination with Domoticz you can reach it via Wifi anyway

[bibo456]

That's what I tought too.
thank you for your confirmation.
I will order one

[datzmazzie]

I allready have a NRF24L01 on my RFLink (the one thats comes with the RFLink) I think I don't us that one for any of my device. Is it possible to use that one for mi-light?

Verstuurd vanaf mijn E6653 met Tapatalk