1CH wireless relay

[jjansen]

I have this wireless relay
http://www.ebay.com/itm/DC-12v-10A-rela ... 1596660691

With the remote it is working correctly.
It is also seen by domoticz/RFlink as a
Light/Switch Chuango

But I cannot switch this device with Domoticz. One or two times from my several attempts worked, but I cannot reproduce.

Any idea how to solve this?

[Voyager]

Make a debug log as explained here:
http://www.nemcon.nl/blog2/2015/07/cc
and mail the data from your remote control buttons to
[email protected]

[jjansen]

I got the following respons

Code: Select all

20;72;DEBUG;Pulses=50;Pulses(uSec)=480,1530,390,1530,420,1530,1440,450,390,1530,1440,450,390,1530,1440,450,390,1530,144020,1530,1440,450,420,1530,1440,450,1440,450,1440,;
20;73;Chuango;ID=ea8a00;SWITCH=02;CMD=ON;

[marcojpolet]

Hi JJ,

What I saw with my Action remote control, is that it is presented in Domoticz (through RFLink) as several different pieces of hardware. Only one of them worked to toggle the switch. So check this Devices list in domoticz to see if there are actually more devices there.

Regards,
Marco

[jjansen]

Hi JJ,

What I saw with my Action remote control, is that it is presented in Domoticz (through RFLink) as several different pieces of hardware. Only one of them worked to toggle the switch. So check this Devices list in domoticz to see if there are actually more devices there.

Regards,
Marco

No, this is not the case with this one. It's only one device showing up

[SHadley1138]

i have a very similar issue with a similar device. the relay works fine, seen by seen by domoticz/RFlink as a Light/Switch, Change, but Domoticz can't seem to fire the switch... very odd

[jjansen]

Turns out I have a 315 Mhz switch. I will replace it with a 433 Mhz alternative