MySensors - Gateway to Domoticz

[alexsh1]

No... not really

You can remove both nodes... does it come back twice?

Yes, it does come back. I have similar problem with the Serial GW (childs are duplicated).

[gizmocuz]

Do you have 2 gateways ?

[alexsh1]

Do you have 2 gateways ?

Yes, I have two, but only one is working at all times - I have some spare hardware and experimenting a bit
Nodes and Childs are messed up
How do I manually assign a node Nr please?

[darknico31]

Hi,

Could it be the same problem I described here ?
http://www.domoticz.com/forum/viewtopic.php?f=6&t=8848

[alexsh1]

Hi,

Could it be the same problem I described here ?
http://www.domoticz.com/forum/viewtopic.php?f=6&t=8848

Yes, it is the same problem. I have Childs duplicated as well.

[gizmocuz]

It is not really a duplicate, it is displayed double in the node list.
the latest beta should now solve this (i forgot to query twice with the hardware id included, so on both hardware/gateways, you had node 10)

[darknico31]

If you refer to this commit "MySensors better support for multiple gateways".

I only have one gateway and I have the "duplication" problem.

I will test to recompile tomorrow and test if anything change.

[alexsh1]

It is not really a duplicate, it is displayed double in the node list.
the latest beta should now solve this (i forgot to query twice with the hardware id included, so on both hardware/gateways, you had node 10)

I still have the same issue in v.3586

[gizmocuz]

Hmmmm....

I send you a PM

the function that adds a new node to the database is

MySensorsBase::InsertNode

and is called when the node can not be found

the nodes are loaded at startup with

MySensorsBase::LoadDevicesFromDatabase

while typing, i see this is only done for the serial gateway!

Please check beta #3587

[darknico31]

It's ok for me.
2.3589 / 371d507
Thanks Gizmocuz

[alexsh1]

Thanks for your help.
Fixed for the ethernet gateway now

Hmmmm....

I send you a PM

the function that adds a new node to the database is

MySensorsBase::InsertNode

and is called when the node can not be found

the nodes are loaded at startup with

MySensorsBase::LoadDevicesFromDatabase

while typing, i see this is only done for the serial gateway!

Please check beta #3587

[fets]

Hello,
I would to know a few things on domoiticz :
1- is it possibile to check (log) every incoming/outgoing message to/from gateway. Cause I have a strange behavior with a multisensor node and want to be sure everything sent is received.

2- is it possible using a dummy sensor or a lua script to directly send mysensor formatted message to the gateway ?

[gizmocuz]

1) if you compile from source and set breakpoints (in debug mode a lot more is logged), and to debug your nodes, just plug them in and open a serial monitor (like in the ardiono ide)
2) no, but there is a new V_CUSTOM type, that you can use to request sensor values of domoticz, and send them to the node

[fets]

Thanks for your answer

1) if you compile from source and set breakpoints (in debug mode a lot more is logged) ! I using domoticz on raspberry pi 2, how do I debug ?
, and to debug your nodes, just plug them in and open a serial monitor (like in the ardiono ide) : I already used serial monitor to debug my node. But I have a multisensor node among with 2 S_DOOR sub sensor : the state is sent from sensor to gateway but I don't see anything on domoticz : contact never changed state and nothing in the log.

2) no, but there is a new V_CUSTOM type, that you can use to request sensor values of domoticz, and send them to the node I saw your topic on this new type, but for now I am still running mysensors 1.5 API

[gizmocuz]

You could also compile under windows with visual studio, and plug in the gateway in a usb port

[fets]

Difficult for the moment to get a windows machine.
Do you know if somebody report issues with multisensensor node (in my case 8 : S_TEMP + S_HUM + 2 * S_LIGHT + 2 * S_LOCK + 2 * S_DOOR) ?

[gizmocuz]

i have some multisensors made (temp+hum+baro) without problems

[fets]

I experinced several strange behaviour :

S_LIGHT actuator receive type 36 wich is V_LOCK_STATUS. This is normally associated with my other sensors S_LOCK. So in my node I don't check anymore the incoming type for those actuator.

S_DOOR sensor send notification but are not managed by domoticz 2.3563. But I'm pretty sure I saw it working with a previous version.

[gizmocuz]

I experinced several strange behaviour :

S_LIGHT actuator receive type 36 wich is V_LOCK_STATUS. This is normally associated with my other sensors S_LOCK. So in my node I don't check anymore the incoming type for those actuator.

S_DOOR sensor send notification but are not managed by domoticz 2.3563. But I'm pretty sure I saw it working with a previous version.

i did some changes indeed, but it should work, this is whats changed:

Code: Select all

				std::string lState = (light_command == light2_sOn) ? "1" : "0";
				if (pChild->presType == S_LOCK)
				{
					//Door lock
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_LOCK_STATUS, lState, pChild->useAck);
				}
				else if (pChild->presType == S_SCENE_CONTROLLER) 
				{
					//Scene Controller
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, (light_command == light2_sOn) ? V_SCENE_ON : V_SCENE_OFF, lState, pChild->useAck);
				}
				else
				{
					//normal
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_STATUS, lState, pChild->useAck);
				}

could you check in the hardware setup of mysensors if the presentation types are correct for your nodes?

[gizmocuz]

Okey, tested....

could you also test with the mysensors example sketch called 'MockMySensors' ?