Raspberry Pi with usb-rs485 and modbus device

[2jRaspberry]

Hi,
Is possible configure a dummy device with modbus switches and modbus power meter
with pymodbus based script with a similar http://openenergymonitor.org/emon/sites ... on.py_.txt
and usb-rs485 CH340 chip '/dev/ttyUSB0' ?
Thanks

[pj-r]

Its possible. Take a look at JSON API of domoticz.

[Elektrotek]

Its possible. Take a look at JSON API of domoticz.

Any application example on that?
I want to control and read a RS485-connected machine too, by representing it as a domoticz virtual device, via that usb-rs485 converter.
Greetings,
Elektrotek.

[2jRaspberry]

To Elektrotek

Sorry, I don't have permission for private messages.
I don't found a way through this topic

[maciekelga]

Hi,
I also looking for how to control device trought RS-485 ModBus.
How is possible to send from dummy switch from Domoticz information with ModBus string: 0x01 0x05 0x00 0x00 0xFF 0x00 0x8C 0x3A
This string define press switch button which should be send to my home automation.

I want to control my device via usb-rs-485 converter.

[maciekelga]

Any answer?

LG G2 mini