[Plugin] Raspberry Pi GPIO using libgpiod (Debian 13 Trixie / Pi 3, 4 & 5 compatible)

Moderator: leecollings

Post Reply
fichetv
Posts: 1
Joined: Friday 20 November 2026 14:26
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

[Plugin] Raspberry Pi GPIO using libgpiod (Debian 13 Trixie / Pi 3, 4 & 5 compatible)

Post by fichetv »

Hello everyone,

With the release of Raspberry Pi OS / Debian 13 (Trixie) and newer Linux kernels, legacy GPIO libraries like RPi.GPIO or WiringPi no longer work reliably—especially for reading input pins.

To solve this, I forked and adapted the classic Domoticz-GPIO-Plugin to use libgpiod (python3-libgpiod v2), supporting both outputs and inputs directly with BCM GPIO numbering (GPIO 2 to 27).

Key Features:
• Native libgpiod support (works on Debian 13 Trixie, Raspberry Pi 3, 4, and 5).
• Supports both Output pins (relays, active-high / active-low) and Input pins (switches, dry contacts).
• Configurable internal Pull-Up, Pull-Down, or None (external resistor) for inputs.
• Uses standard BCM pin numbers instead of physical board pin numbers.

GitHub Repository & Installation Instructions:
github.com/VincentFichetElectronique/Domoticz-GPIO-Plugin-libgpiod

Feel free to test it and share any feedback or suggestions!
Rik60
Posts: 245
Joined: Sunday 25 June 2023 21:54
Target OS: Raspberry Pi / ODroid
Domoticz version: 2026.3
Location: The Netherlands
Contact:

Re: [Plugin] Raspberry Pi GPIO using libgpiod (Debian 13 Trixie / Pi 3, 4 & 5 compatible)

Post by Rik60 »

Thanks, but it would be nice to translate the French text into English
Post Reply