Zwave issue after restart...

Please use template to report bugs and problems. Post here your questions when not sure where else to post
Only for bugs in the Domoticz application! other problems go in different subforums!

Moderators: leecollings, remb0

Forum rules
Before posting here, make sure you are on the latest Beta or Stable version.
If you have problems related to the web gui, clear your browser cache + appcache first.

Use the following template when posting here:

Version: xxxx
Platform: xxxx
Plugin/Hardware: xxxx
Description:
.....

If you are having problems with scripts/blockly, always post the script (in a spoiler or code tag) or screenshots of your blockly

If you are replying, please do not quote images/code from the first post

Please mark your topic as Solved when the problem is solved.
Post Reply
lost
Posts: 725
Joined: Thursday 10 November 2016 9:30
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Zwave issue after restart...

Post by lost »

After updating from 2025.1 to 2026.4 3 weeks ago, as everything looked stable, I did some saving job (domoticz file tree and even the full SD card) in case some restore would be needed someday.
This was ~2h with domoticz not running.
This evening, I saw 1 door sensor did not report since this morning: It's IDs are zeroed. As well, all my heating control devices are in same situation (even if some I tested looks to handle commands) and a PIR.
Tried to disable then re-enable Openzwave USB device but same situation after all nodes queried.
=> So the question is: Did others notices some regression on recent Domoticz versions concerning OZW (deprecated, but I do not add zwave devices since years & don't want to deal with the added burden of zwaveJS)?
Did not noticed anything in OZW restart logs, only some timeouts that are quite common at startup phase but no error.
globetrotter
Posts: 11
Joined: Tuesday 09 December 2025 17:55
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Zwave issue after restart...

Post by globetrotter »

Did you try to refresh the node information in:

Settings > Hardware > Z-wave Settings > Select a not working NodeID and click: Refresh Note Info...can take a while.
Post Reply