enphase envoy node-red issue

[hemant5400z]

Hello @

As said before in the Domoticz native Enphase application:

You can look up the counter value at Feb 18 2024 and Feb 17 2025. The difference is your production of last year.

Or select any other date.

If you don't want that.
Create your own energy counter in NR.
see: https://flows.nodered.org/node/node-red ... nergymeter

Regards

Hi,

Is there a proper description for this to setup the flow?

where does power come from MQTT? domoticz not sure on how to setup.

Hemant

[gizmocuz]

In Domoticz, go to Setup->Hardware, add the Enphase hardware and configure the paramaters and you're done.
There is no need for a node-red flow, complicates things and is a waste of resources.
I am sure you can find other interesting stuff to do with Node-Red then trying to get things done that can also be done natively.

[FireWizard]

Hello @hemant5400z,

You asked:

Is there a proper description for this to setup the flow?

In Node-Red almost every node has a short description and examples. Follow the link, that I posted before.

where does power come from MQTT? domoticz not sure on how to setup.

I have no idea, what you mean? I assume you have the data available in NR, otherwise you cannot send the data to Domoticz.

But why dont you follow @Gizmocuz recommendation. Much easier.
That I still have a NR flow running has historical reasons. There was a time that the native solution did not give you the individual panel data.

Regards

[hemant5400z]

Thank both,

I will follow your advice and go with native.

Hemant