how to use virtual switch,switch,media player ?

[reza]

hi guys
i want use a misc remote. i have IR codes and i have an espeasy IR transmitter. in domoticz i want use a virtual switch as media player. how to use remote controller in dummy device?

Media_Player.png (17.02 KiB) Viewed 445 times

i can not use remote and this is no settings for this.

[habahabahaba]

You have to write dzVents script actioned by your virtual switch.
So there you write all commands

[waltervl]

And in the Dzvents documentation there is section about how to set the commands https://www.domoticz.com/wiki/DzVents:_ ... dia_Server

[reza]

can you give me a simple dzvents code for control with virtual switch (media player) for use media player remote control. for example for play/pause or vol+ or vol-
for example i have this code for Vol+(with a espeasy ir trasmitter):
http://192.168.1.199/control?cmd=IRSEND,NEC,FF9867,32

[habahabahaba]

In my case i have a virtual switch type of Selector for my TV.
But my IR controller needs internet so i need curl installed .

Code: Select all

return {
	on = {
		devices = {87}, -- IDx of your virtual switch
        httpResponses = {
            'TVcontrol_trigger' -- must match with Callback 
                        }
	},
	
        
	logging = {
		level = domoticz.LOG_INFO,
		marker = 'TV control',
	},
	
	execute = function(domoticz, device)
	    
	   local devID = ''
	   local APIkey = ''
	   
	   
	   --local position = device.state
	   local positionName = device.levelName
	   
        local switch = domoticz.devices(87)
        local switchState = switch.level

          -- check current state
          if switchState == 0 then -- on/off 
                      
            devID = '1
            --domoticz.log('Zero', LOG_ERROR)
            
          elseif switchState == 10 then -- chanel +
            
            devID = '2'
            --domoticz.log('10', LOG_ERROR)
            
          elseif switchState == 20 then -- Vol +
            
            devID = '3'
            
            domoticz.log('20 ' .. positionName, LOG_ERROR)
            
          elseif switchState == 30 then -- Vol ++
              
            devID = '4'
            
            --domoticz.log('30 ++', LOG_ERROR)
            
          elseif switchState == 40 then -- Vol -
              
            devID = '5'
            
            --domoticz.log('40 -', LOG_ERROR)
            
          elseif switchState == 50 then -- Vol  -- Vl&#9660
            
            devID = '6'
            domoticz.log('50 --' .. positionName, LOG_ERROR)
            
          elseif switchState == 60 then -- Chanel -
            
            devID = '7'
            --domoticz.log('60 -', LOG_ERROR)
            
          elseif switchState == 70 then
              
            devID = '8'
            --domoticz.log('70', LOG_ERROR)
          end
          
          
          local Command = 'curl -H \"Authorization: Bearer '.. APIkey ..'\" -s -X POST \"https://api.iot.yandex.net/v1.0/scenarios/'.. devID ..'/actions\"'
          
          domoticz.executeShellCommand(Command)
          
          --domoticz.log(switchName, LOG_ERROR)
		
	end
}

In your case if you are in local networ you can use

Code: Select all

domoticz.openURL({
				url = '<YOUR URL>', 
				method = 'POST',
				callback = 'TVcontrol_trigger', -- see httpResponses above.
			}).afterSec(0)

[reza]

In my case i have a virtual switch type of Selector for my TV.
But my IR controller needs internet so i need curl installed .

thank you for help. i am beginner in dzVents. i try but i can not run this . i have an error

Code: Select all

2024-09-21 16:27:00.324 Error: dzVents: Error: (3.1.8) error loading module 'Script #2' from file '/home/pi/Domoticz/scripts/dzVents/generated_scripts/Script #2.lua':
2024-09-21 16:27:00.324 ...pi/Domoticz/scripts/dzVents/generated_scripts/Script #2.lua:30: unfinished string near ''1'

also can not open remote control of virtual device "media player" again.
can you help me more? thank you
please give me one complete dzVents code with that my url and espeasy for my vol+ that i can open remote of virtual device "media player" so i can to complete with other button , thank you

[habahabahaba]

Try this

Code: Select all

local devId = 87 -- change to your switch IDx

return {
	on = {
		devices = {devId}, -- IDx of your virtual switch
        httpResponses = {
            'MediaPlayer' -- must match with Callback 
                        }
	},
	
        
	logging = {
		level = domoticz.LOG_INFO,
		marker = 'TV control',
	},
	
	execute = function(domoticz, device)
	    
	   local volUp = 'http://192.168.1.199/control?cmd=IRSEND,NEC,FF9867,32'

        local switch = domoticz.devices(devId)
          
          
        domoticz.openURL({
				url = volUp, 
				method = 'POST',
				callback = 'MediaPlayer', -- see httpResponses above.
			}).afterSec(0)
			
        domoticz.log('Volume Up of ' .. switch.name, LOG_INFO)
		
	end
}

[reza]

Try this

thank you. i try and this message write to log every some seconds and repeat.

Code: Select all

2024-09-23 00:26:50.692 Status: EventSystem: Script event triggered: /home/pi/Domoticz/dzVents/runtime/dzVents.lua
2024-09-23 00:26:50.757 Status: dzVents: Info: Handling httpResponse-events for: "MediaPlayer"
2024-09-23 00:26:50.757 Status: dzVents: Info: TV control: ------ Start internal script: Script #1: HTTPResponse: "MediaPlayer"
2024-09-23 00:26:50.775 Status: dzVents: Info: TV control: Volume Up of iii
2024-09-23 00:26:50.775 Status: dzVents: Info: TV control: ------ Finished Script #1

and again remote control on virtual device(media player) can not open and dont show any bottun.

[habahabahaba]

Sorry, i gave you example for the virtual switch, i dont know such device as virtual device (media player). May be you are using some plugin...

Anyway
one switch = one button
one selector switch = several buttons

[habahabahaba]

2024-09-23_11-41-34.png (4.3 KiB) Viewed 358 times

Thats my virtual Selector Switch. I can put thare up to 10 buttons = up to 10 commands.

Oh, and does your URL "http://192.168.1.199/control?cmd=IRSEND,NEC,FF9867,32" work from browser?