IKEA Fyrtur, Tredansen and Praktlysing

[kris]

I followed the steps in https://zigbeefordomoticz.github.io/wik ... ller-blind

After enabling this setting the blind will show up in the list, but only the blind. When I try to save it, it won't save and I don't get a group Id.

Is there some other setting I need to enable? I have enabled "Create Group 0000" but it doesn't create and save that group either...

[pipiche]

So here is what I did on my test system with a ZIgate V1

1- in the settings enable
- group
- create group 0000

Screenshot 2022-10-27 at 21.41.37.png (97.74 KiB) Viewed 404 times

2- I restarted the plugin

and after the restart got the group 0000 created

Screenshot 2022-10-27 at 21.43.15.png (77.9 KiB) Viewed 404 times

So if you cannot reach that, please have a look to the Domoticz logs and the Plugin logs, because that would mean something do not work.

[kris]

Hey I got it working! (the group that is).
I had to disable and enable the plugin from Domoticz Hardware tab, the plugin restart from the DomoticzZigbee WebUI didn't take apparently.

Thanks for your help!
Now if I could only get the remote joined to the group.

[kris]

I ran the commands

Code: Select all

curl -X PUT -d ‘{“sourceIeee”:”8cf681fffe2d5cda”, “sourceEp”: “01”, “groupId”: “0000”, “cluster”: “0102”}’ http://127.0.0.1:9440/rest-zigate/1/unbinding-group

and

Code: Select all

curl -X PUT -d ‘{“sourceIeee”:”8cf681fffe2d5cda”, “sourceEp”: “01”, “groupId”: “0001”, “cluster”: “0102”}’ http://127.0.0.1:9440/rest-zigate/1/binding-group

and got response that the bind was made but he remote still won't control the blind...


Anyway, I don't care too much about that as I have scripted the remote buttons and it's working nicely now.
What I really want though is to be able to set a level for the blind from Domoticz.