Konke switch and Zigate

[JanZorz]

I'm observing somehow strange behaviour with Konke button switch (Model 3AFE170100510001). Every 5 minutes I see update in the log:

2021-03-07 19:34:13.591 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 19:39:15.959 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 19:44:18.324 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 19:49:20.686 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 19:54:23.051 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 19:59:25.402 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 20:04:27.769 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00
2021-03-07 20:09:30.131 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 0:00

This is "Single click" state and that means that also action that is set for "Single click" will be executed every 5 minutes despite the fact that nobody is touching the button.

If I then press it twice (double click, value 1:00) and leave the button alone - this starts happening:
2021-03-12 10:38:14.826 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 10:43:17.147 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 10:48:19.484 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 10:53:21.821 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 10:58:24.152 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 11:03:26.483 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10
2021-03-12 11:08:28.822 Python Plugin System: (Zigate) UpdateDevice - (Konke switch) 1:10

It starts repeating the last state and "simulating" that I pressed the button.

I have several Aqara switches connected to the same Zigate controller, but their behaviour is "update when you press it". Is this a normal behaviour for Konke device?

Connected to Zigate controller, Plugin: 4.12.203 Firmware: 031d

Cheers, Jan

[pipiche]

looks strange, something like the switch is sending status update ...

could you kindly attached the export.json from "Plugin Device List RAW (json)" this is from Web UI Tools

[JanZorz]

{"App Version":"23","Battery":80,"ConsistencyCheck":"ok","DeviceType":"RFD","Ep":[{"ClusterList":[{"0000":"Basic"},{"0001":"Power Configuration"},{"0003":"Identify"},{"0004":"Groups"},{"0005":"Scenes"},{"0006":"On/Off"}],"Ep":"01"}],"HW Version":"1","Health":"Live","IEEE":"086bd7fffe91577a","LQI":96,"LastCmds":[],"LastSeen":"15/03/2021 10:11:40","LogicalType":"End Device","Manufacturer":"","Model":"3AFE170100510001","PowerSource":"Battery","ProfileID":"0104","ReceiveOnIdle":"","Stack Version":"1","Stamp":{"LastSeen":"15/03/2021 10:11:40","MsgType":"8011","Time":"2021-03-15 10:11:40","time":1615799500.4898803},"Status":"inDB","Type":"SwitchAQ2","WidgetList":[{"WidgetName":"Okrogel gumb - biljard Konke","WidgetType":"SwitchAQ2","_WidgetID":"625"}],"ZDeviceID":"0002","ZDeviceName":"Konke - gumb","_NwkId":"4f27"}

[JanZorz]

If I press the Konke button - it reacts and works (device switches on or off), problem is just that regular 5 minutes updates that are spontaneously switching that light on and off - and that might get a little bit annoying over time

Cheers and thnx, Jan

[pipiche]

Jan can you try the following

1/update to the latest version of beta branch: 4.12.209

2/ Remove the the device widget from Domoticz to get it fully removed

3/ In the plugin Advanced Settings enable: 'doUnbindBind'

4/ Switch the Pairing mode 'Accept new Hardware' On

and pair the the Konke switch

[JanZorz]

Much better now, thnx!

Plugin version is 4.12.217 and all works as expected... well, One click (0:00) and Two clicks (1:10) works as expected, Three Clicks doesn't work if you press three times - but you need to do a long press and then you get 2:20 value out of it.

Cheers and thnx, Jan