Currently available weather station?
Moderators: leecollings, Stuntteam
-
- Posts: 142
- Joined: Tuesday 24 January 2017 23:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Location: Australia
- Contact:
Currently available weather station?
Is anyone aware of a currently available weather station that is compatible with rflink preferably one that ships to Australia 

V 2020.2 RPI 3
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
-
- Posts: 848
- Joined: Sunday 23 February 2014 17:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: mixed
- Location: Hengelo(Ov)/NL
- Contact:
Re: Currently available weather station?
First check the extensive list of supported devices for RFLinkGateway
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
-
- Posts: 142
- Joined: Tuesday 24 January 2017 23:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Location: Australia
- Contact:
Re: Currently available weather station?
Yeah I've done that. But looking online I can't seem to find where any of them are available. I did like the acurite 5 in 1 a couple of years ago but I'm struggling to find them available
V 2020.2 RPI 3
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
-
- Posts: 848
- Joined: Sunday 23 February 2014 17:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: mixed
- Location: Hengelo(Ov)/NL
- Contact:
Re: Currently available weather station?
The survey might be lagging rel. to the actual development/configuration.
Therefore, reversely, ask the Stuntteam of RFLink whether they have an interface for the weather station which is interesting to you:
see also section Development under this URL.
Therefore, reversely, ask the Stuntteam of RFLink whether they have an interface for the weather station which is interesting to you:
see also section Development under this URL.
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
-
- Posts: 70
- Joined: Friday 21 September 2018 18:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.10717
- Contact:
Re: Currently available weather station?
"Asking if a device that is not on the supported device list could be supported is useless."Toulon7559 wrote: ↑Monday 02 December 2019 15:34 The survey might be lagging rel. to the actual development/configuration.
Therefore, reversely, ask the Stuntteam of RFLink whether they have an interface for the weather station which is interesting to you:
see also section Development under this URL.
http://www.rflink.nl/blog2/
My hopes are on this https://github.com/merbanan/rtl_433
-
- Posts: 241
- Joined: Tuesday 16 May 2017 13:05
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Neterlands
- Contact:
Re: Currently available weather station?
is there anything like this for wifi that works with domoticz?
would love to have a weatherstation but do not want to buy an rflink just for that.
would love to have a weatherstation but do not want to buy an rflink just for that.
raspberry pi | xiaomi vacuum | yeelight | philips hue | zwave | ubiquiti unifi | harmony | sonoff | zigbee2mqtt | https://www.youtube.com/channel/UC2Zidl ... m1OLuNldfQ
-
- Posts: 70
- Joined: Friday 21 September 2018 18:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.10717
- Contact:
Re: Currently available weather station?
RTL-SDR costs only $21.95 USD if you want to try it. https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/snellejellep wrote: ↑Monday 02 December 2019 19:00 is there anything like this for wifi that works with domoticz?
would love to have a weatherstation but do not want to buy an rflink just for that.
With RTL-433 It can decode many signals like car tyre pressure and temperatures.

I have RFLink, RTL-SDR, Z-Wave stick and Zigate. RFLink is not worst one even the latest firmware is over two years old. Zigate and Zigbee is by far the most rubbish one. Even the hardware tends to break and website is only in French. What's that about? If one wants to control only lights Philips Hue hub, 38 €, is less expensive than Zigate, 49 €.
-
- Posts: 142
- Joined: Tuesday 24 January 2017 23:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Location: Australia
- Contact:
Re: Currently available weather station?
The device in was looking at was on the supported list.mpx2 wrote: ↑Monday 02 December 2019 18:54
"Asking if a device that is not on the supported device list could be supported is useless."
http://www.rflink.nl/blog2/
Quite literally for any of the weather stations or multi sensor 5 in 1
I cannot find any product that is available on Australia
I didn't really want to start a debate or anything or look at different technologies... Was just hoping that someone who uses the same technology as I was using had recently purchased or investigated purchasing one that could point me in the right direction
V 2020.2 RPI 3
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
RFlink 334 mhz
mysensors
broadlink
Mirabella Genio Globes
-
- Posts: 848
- Joined: Sunday 23 February 2014 17:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: mixed
- Location: Hengelo(Ov)/NL
- Contact:
Re: Currently available weather station?
@mpx2
My reference to http://www.rflink.nl/blog2/ was more aimed at another, earlier section:
If RFLInk is not filling the gap by wireless interface, perhaps the configuration with TE923-interface is suitable for Domoticz-interfacing of a PWS:
using an USB-interface between the Domoticz-processor and a counterpart in the PWS (usually a console).
Another USB-interface for Domoticz&Meteo also available for Davis Vantage PWS.
My reference to http://www.rflink.nl/blog2/ was more aimed at another, earlier section:
Unfortunately the implication is, that you already should buy/have both the RFLink and the PWS, running the risk that the combination will never work if the Stuntteam does not produce a driver in a next release of the firmware.Regarding support questions:
- If you have a device that is not on the supported device list and is also not working, make debug logs and mail that to us.
If RFLInk is not filling the gap by wireless interface, perhaps the configuration with TE923-interface is suitable for Domoticz-interfacing of a PWS:
using an USB-interface between the Domoticz-processor and a counterpart in the PWS (usually a console).
Another USB-interface for Domoticz&Meteo also available for Davis Vantage PWS.
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Who is online
Users browsing this forum: No registered users and 0 guests