Pizigate / Zigate not working Topic is solved

[pipiche]

By the way, I entered the gpio sequence to set production mode in /etc/rc.local so that if the pi reboots, Pizigate will still work.

I think this is a pretty good approach.

[pipiche]

Did you do an Erase PDM ?

BTW the blue Pizigate LED keeps blinking all of the time. Is it supposed to do that? A result of setting the permit join to 255?

Correct. 255 make the Led blinking for ever. Which means you can pair new devices all of the time.
If you want to set to 0 (in order to disable Pairing new HW), do it first with 1 restart the plugin and then 0 restart the plugin.
As 0 as not impact at all

[pipiche]

I have the same problems as Pgielen.

If i configure the plugin an choose PI for model this is not saved/updated. It is saved as usb.

Anybody ideas?

Greets Gijs

Just do a git pull to get 4.1.4 , this is fixed now

[domogijs]

When I start the plugin I get these errors: 2019-04-10 20:09:00.774 Error: (Zigate volg) onMessage : Frame size is bad, computed = 12 received = 21
2019-04-10 20:09:00.774 Error: (Zigate volg) onMessage : Frame CRC is bad, computed = 105 received = 151

Anybody ideas

Greets gijs

[pipiche]

This issue is related to the Software Reset done just after the Erase PDM.
Make sure that you have Erase PDM set to False , otherwise every time you'll restart you will remove all information from Zigate

Here is the reference to the bug :
https://github.com/fairecasoimeme/ZiGate/issues/164

[domogijs]

Ok thanks!

[domogijs]

Ok thanks.

I also successfully added ikea lamps now.

[pgielen]

I also successfully added ikea lamps now.

So did I, today!

[pipiche]

PS/ On the beta branche you have even now the Over-The-Air upgrade of Ikea/Tradfri firmware

[domogijs]

Good there is active deleopment going on. Thanks for the gpio tip (i found out the hard way )

I sam trying to update but i dont know wich path.

./JennicModuleProgrammer -V 6 -P 115200 -f "<path to bin>" -s / dev / ttyUSB0

What to fill out over there?

Sorry i am noob

Greets Gijs

[pipiche]

Good there is active deleopment going on. Thanks for the gpio tip (i found out the hard way )

I sam trying to update but i dont know wich path.

./JennicModuleProgrammer -V 6 -P 115200 -f "<path to bin>" -s / dev / ttyUSB0

What to fill out over there?

Sorry i am noob

Greets Gijs

This is quiet Zigate HW related. I suggest that you use : https://zigate.fr/forum/ there is an English channel, where you can report the issue.

But here is where you can find the latest firmware version: https://github.com/fairecasoimeme/ZiGat ... ag/Release

[domogijs]

hmm reboot still also gives the firmware issue

this is how the file looks like. What am i doing wrong?

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

gpio mode 0 out
gpio mode 2 out
gpio write 2 1
gpio write 0 0
gpio write 0 1
exit 0

[domogijs]

Good there is active deleopment going on. Thanks for the gpio tip (i found out the hard way )

I sam trying to update but i dont know wich path.

./JennicModuleProgrammer -V 6 -P 115200 -f "<path to bin>" -s / dev / ttyUSB0

What to fill out over there?

Sorry i am noob

Greets Gijs

This is quiet Zigate HW related. I suggest that you use : https://zigate.fr/forum/ there is an English channel, where you can report the issue.

But here is where you can find the latest firmware version: https://github.com/fairecasoimeme/ZiGat ... ag/Release

seems like i am on tyhe right version allready: Zigate plugin 4.1.2 started

But still the PI flips to USB in setting up theb hardware.

[pipiche]

Good there is active deleopment going on. Thanks for the gpio tip (i found out the hard way )

I sam trying to update but i dont know wich path.

./JennicModuleProgrammer -V 6 -P 115200 -f "<path to bin>" -s / dev / ttyUSB0

What to fill out over there?

Sorry i am noob

Greets Gijs

This is quiet Zigate HW related. I suggest that you use : https://zigate.fr/forum/ there is an English channel, where you can report the issue.

But here is where you can find the latest firmware version: https://github.com/fairecasoimeme/ZiGat ... ag/Release

seems like i am on tyhe right version allready: Zigate plugin 4.1.2 started

But still the PI flips to USB in setting up theb hardware.

Make sure you are on the latest version of the plugin, which seems not the case

Code: Select all

git pull

should make it and will fix the USB issue (which is not an issue)

[domogijs]

By the way, I entered the gpio sequence to set production mode in /etc/rc.local so that if the pi reboots, Pizigate will still work.

I think this is a pretty good approach.

I try to achieve this but the pins go back to deafult after reboot. What am i doing wrong?

Code: Select all

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

gpio mode 0 out
gpio mode 2 out
gpio write 2 1
gpio write 0 0
gpio write 0 1

exit 0

[pipiche]

Is the script executable ? Did you check that is correctly executed ?

Instead of the gpio command, I would instead refer to the

Code: Select all

Tools/pi-zigate.sh run

. So if in the future there is some changes required, it will be automatically done without any changes to the rc.local

[domogijs]

used the tool and works!

Thanks.

Greets Gijs

[pipiche]

By the way, I entered the gpio sequence to set production mode in /etc/rc.local so that if the pi reboots, Pizigate will still work.

That is safe!

[Sjuul70]

Code: Select all

sudo apt install python3-dev
sudo apt-get update
sudo apt-get upgrade

Raspberry pi 3B+
Raspbian Buster Lite

Happy pizigate-user now.

[pipiche]

Code: Select all

sudo apt install python3-dev
sudo apt-get update
sudo apt-get upgrade

Raspberry pi 3B+
Raspbian Buster Lite

Happy pizigate-user now.

Yep that is correct, Domoticz Python Framework requires python-dev
https://www.domoticz.com/wiki/Using_Python_plugins