Group de-activation device
Moderators: leecollings, remb0
-
- Posts: 8
- Joined: Monday 21 December 2015 10:53
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Stable
- Location: Deventer, Netherlands
- Contact:
Group de-activation device
Currently you can create a group (scene) and within that group you can assign a button to activate the group. It would be nice if there was an option to de-activate the group as well. Just like the software buttons on the dashboard.
-
- Posts: 370
- Joined: Monday 05 October 2015 10:16
- Target OS: -
- Domoticz version:
- Contact:
Re: Group de-activation device
Perhaps i misunderstand...
The following is my expirience so far;
A scene is activated by a "remote" button like LightwafeRF/KlikAanKlikUit remotes.
With it activates an on and/or off command to the assigned devices.
A Scene only has One button on the dashboard so activates an scene.
A Group however has On and Off and activates the on or off actions...
So basicly To activate an Off Scene assign devices with Off command and a remote's button.
Have tried it already and with the KlikAanKlikUit(LightWave) every button gives a signal device-id_button-id_command(on or off).
Grtz,
Stephan
The following is my expirience so far;
A scene is activated by a "remote" button like LightwafeRF/KlikAanKlikUit remotes.
With it activates an on and/or off command to the assigned devices.
A Scene only has One button on the dashboard so activates an scene.
A Group however has On and Off and activates the on or off actions...
So basicly To activate an Off Scene assign devices with Off command and a remote's button.
Have tried it already and with the KlikAanKlikUit(LightWave) every button gives a signal device-id_button-id_command(on or off).
Grtz,
Stephan
-
- Posts: 5
- Joined: Friday 19 February 2016 19:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Group de-activation device
sorry for opening an old post but I can't find the answer for (I hope) a very simple thing. I tried the same with a group but my Z-Wave button is always registered as on never as off. I would like to add a on and off button...
Who is online
Users browsing this forum: Bing [Bot] and 1 guest