Dashticz - Show your dashboard and how-to's!

[RolandinBru]

I’m new in this forum.
Can somebody help me out.
I cannot get an image from my Ip camera in Dashticz. I have an image in the Domoticz dashboard. I use the same URL without result.
I defined buttons.webcam in CONFIG.js according to almost every example I found in this forum. I think I tried everything
I’m out of ideas

[Lokonli]

I’m new in this forum.
Can somebody help me out.
I cannot get an image from my Ip camera in Dashticz. I have an image in the Domoticz dashboard. I use the same URL without result.
I defined buttons.webcam in CONFIG.js according to almost every example I found in this forum. I think I tried everything
I’m out of ideas

Can you post here the line from your CONFIG.js where you define the button?

Can you look in Chrome for errors? Press F12 to enter developer mode. Look in the network tab whether you can find the request to your webcam, and what the response is.

Do you see the image if you create a frame instead of a button?

[Siewert308SW]

Far from a finished setup but we have a start.
Just came by to say thx and love dashticz.

7" Official raspberry touchscreen in a SmartiPi case which will mounted to the wall later on.
In know layout space is limited but a overwhelming amount of information also aint that convenient.
Just needed the versatility
Home screen is ready now building the switches screen.
Will post my config later on when ready.

20181201_134512.jpg (267.82 KiB) Viewed 3403 times

[EdwinK]

For 7 inch, that looks great

[hoeby]

What are most of the dashticz users using as screen to project on?
Is this a normal tablet which is mounted on the wall or put on a desk?
I love the idea of the tablet with all its build in functions (wifi, speaker, mic, etc.) But don't like the idea that it is 24/7 on the charger with a battery inside. A 7 inch pi screen should be possible, but i am looking for something bigger (10 inch), somebody has an idea or advice?

[RolandinBru]

I’m new in this forum.
Can somebody help me out.
I cannot get an image from my Ip camera in Dashticz. I have an image in the Domoticz dashboard. I use the same URL without result.
I defined buttons.webcam in CONFIG.js according to almost every example I found in this forum. I think I tried everything
I’m out of ideas

Can you post here the line from your CONFIG.js where you define the button?

Can you look in Chrome for errors? Press F12 to enter developer mode. Look in the network tab whether you can find the request to your webcam, and what the response is.

Do you see the image if you create a frame instead of a button?

Thanks for your reply. I got it working. There was a Typo in the CONFIG.js file

This is my Dashboard so far. Still working on it.

Schermafbeelding 2018-12-02 om 22.59.06.png (346.3 KiB) Viewed 3313 times

I have an other question. After 30 seconds the IP camera and Buienradar stop 'streaming' Any thoughts?

[randleman]

I’m new in this forum.
Can somebody help me out.
I cannot get an image from my Ip camera in Dashticz. I have an image in the Domoticz dashboard. I use the same URL without result.
I defined buttons.webcam in CONFIG.js according to almost every example I found in this forum. I think I tried everything
I’m out of ideas

Can you post here the line from your CONFIG.js where you define the button?

Can you look in Chrome for errors? Press F12 to enter developer mode. Look in the network tab whether you can find the request to your webcam, and what the response is.

Do you see the image if you create a frame instead of a button?

Thanks for your reply. I got it working. There was a Typo in the CONFIG.js file

This is my Dashboard so far. Still working on it.

Schermafbeelding 2018-12-02 om 22.59.06.png

I have an other question. After 30 seconds the IP camera and Buienradar stop 'streaming' Any thoughts?

Care to share config?

[RolandinBru]

Also sorted. It has to do with Safari on my Imac. In SeaMonkey it works.

[randleman]

Also sorted. It has to do with Safari on my Imac. In SeaMonkey it works.

Can i get a config of your dashboard?

[EdwinK]

(loads of code)

Succes

I did change creative.css, graphs.js, settings.js, custom.css to add what you've posted here. However I still have some problems. See screenshots. The buttons for the sunscreen and thermostat are way off.

Screen Shot 2018-12-18 at 10.43.01.png (230.03 KiB) Viewed 2936 times

The attachment Screen Shot 2018-12-18 at 10.43.01.png is no longer available

[fechp]

Hi All,

I have a strange issue in my dash. I'm not getting all calendar items in overview?
I see them in the popup screen.. Any idea?

Untitled.gif (12.7 KiB) Viewed 2914 times

Code: Select all

calendars.private = { maxitems: 5, url: 'https://outlook.live.com/owa//calendar/xxxxxxxx/xxxxxxxxxx/xxx/index.html', icalurl: 'https://outlook.live.com/owa//calendar/xxxxxxx/calendar.ics' }

thx, Kristof

[PeJeWe]

How can i make the size of the temperature bigger in a block.

Code: Select all

.block_373_2 {
	font-size:14px !important;

this changes only the size of the name in a block and not the data of the sensor.

Edit:

I found out that this works:

Code: Select all

.block373_2 .title { font-size: 20px; !important; }

for those who whant to use this.

[EdwinK]

Do you appreciate my work and want to buy me a beer?
Send:

Nope. Why?

[RolandinBru]

Also sorted. It has to do with Safari on my Imac. In SeaMonkey it works.

Can i get a config of your dashboard?

No problem, but still making changes. Incorporated P1 elec and gas now. When I’m a bit further, ok?

[rgroothuis]

I found out that I can increase the icon on my Dashticz screen by changing the following line:

Code: Select all

blocks[14]['icon']  = 'fa fa-lightbulb';

into

Code: Select all

blocks[14]['icon']  = 'fa fa-lightbulb fa-3x';

I really like this solution and I have reasonable icons on my screen.

What I don't like from this solution is that the following solution for changing the color of the icon doesn't work anymore:

Code: Select all

.fas.fa-lightbulb {
   color:#F1C300;
}

Any suggestion on how to change the icon color again?

[Vox1100]

Kan iemand mij uitleggen hoe ik de Honeywell t6 koppel met mijn Domoticz blijf bij mijn poginge hangen bij API en token

[mastair]

Kan iemand mij uitleggen hoe ik de Honeywell t6 koppel met mijn Domoticz blijf bij mijn poginge hangen bij API en token

You're writing in the wrong topic and in the wrong language.

Je stelt je vraag in de verkeerde taal en in het verkeerde draadje.

[cobra045]

Kan iemand mij uitleggen hoe ik de Honeywell t6 koppel met mijn Domoticz blijf bij mijn poginge hangen bij API en token

You're writing in the wrong topic and in the wrong language.

Je stelt je vraag in de verkeerde taal en in het verkeerde draadje.

Hoi Mastair,

Look here https://www.domoticz.com/forum/viewtopic.php?t=22430 for your problem.
And use https://translate.google.nl for the translate.

Cobra045

[leonhannink]

Hi Thuis,

can you share your thermostat.js? where to fill in the setpoins? and do you mind sharing your TFF file of the lyric thermostat.
I trie to copy from you post, but it, is very difficult to work like you have in dashticz.

[pieter1964]

Hi

I slowly getting the hang of it about the hows and the whats on dashticz

first other quetions, how can I get here the cofig and lua cripts and more things posted without putting it in this text?

new issue that I haveing now
I cant get the moon phases showing on my screen, picture dont load

I have created the dummy switch with the sensors

moon2.JPG (49.58 KiB) Viewed 1949 times

moon1.JPG (65.18 KiB) Viewed 1949 times

added some info in my config/js
// 33 Moon up
// 34 Moon under
// 35 Moonpercentage
// 36 Moon age
// 37 Moonphase

//user variables Domotics
// 1 XiaomiMP3 Integer 10001
// 2 MoonPicture String
// 3 MoonphaseCheck String


then I created the LUA script and put it into the /script/lua directory, as stated on the webpage
the important part

-- Variables to customize ------------------------------------------------
local moonpicture = "MoonPicture" -- name of the uservar to write the name of the moonphase picture to
local checkvar = "MoonphaseCheck" -- name of the uservar to check if update is allowed
local checktime = 3600 -- check allowed every x seconds 3600 = 60 min. Check the wundergroud API limitation before changing this
local city = "Bladel" -- Your city for Wunderground API
local countryCode = "NL" -- Your country code for Wunderground API
local idxmoonpercentage ='35' -- Your virtual moon percentage illuminated Device ID
local idxmoonage ='36' -- Your virtual moon age Device ID
local idxmoonphase ='37' -- Your virtual moon phase Device ID
local idxmoonrise='33' -- Your virtual moon rise variable ID
local idxmoonset='34' -- Your virtual moon set variable ID
local wuAPIkey = "abcdefghijklmn-enzenz" -- Your Weather Underground API Key
local DOMO_IP = "192.168.0.110" -- Domoticz ip address
local DOMO_PORT = "8084" -- Domoticz port
local tempfilename = '/var/tmp/phase.tmp' -- can be anywhere writeable (chmod 744)
local debug=false -- false, true for domoticz log
-------------------------------------------------------------------------

changed this
config['idx_moonpicture'] = '2';

added this
buttons.moon= {width:12, isimage:true, refreshimage:60000, image: 'moon'}

columns[3]['blocks'] = [buttons.buienradar,tvguide.dutch,'garbage',buttons.moon]

tvgids, garbage, radar works

moon not

what am I doing wrong here??