Anyone know if this device works with domoticz.
I require a remote of some kind to allow my daughter to turn lights on several lights in our house during the night.
https://www.aliexpress.com/store/produc ... 4e68cfymdM
Cheers
NEO COOLCAM NAS-RC03Z
Moderator: leecollings
-
- Posts: 139
- Joined: Saturday 18 April 2015 18:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.6857
- Location: Isle of Wight, United Kingdom.
- Contact:
NEO COOLCAM NAS-RC03Z
Now setup on a RPI3.
Also using Evohome HGI80, RFXTRX433E and a Aeotec Gen5 stick. Mainly a Gen5 Z-Wave system.
My weather (Davis vantage Pro2) data is obtained by weatherunderground
Now collecting rtl_433 data from Apollo Ultrasonic meter
Also using Evohome HGI80, RFXTRX433E and a Aeotec Gen5 stick. Mainly a Gen5 Z-Wave system.
My weather (Davis vantage Pro2) data is obtained by weatherunderground
Now collecting rtl_433 data from Apollo Ultrasonic meter
-
- Posts: 10
- Joined: Sunday 13 December 2015 19:12
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: NEO COOLCAM NAS-RC03Z
I just got one, and the four buttons work.
What happens that domoticz does not have it configured in its configuration files can not be changed parameters.
What happens that domoticz does not have it configured in its configuration files can not be changed parameters.
-
- Posts: 3
- Joined: Saturday 04 November 2017 15:38
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: NEO COOLCAM NAS-RC03Z
Same problem here.
Anyone found solution?
Anyone found solution?
-
- Posts: 54
- Joined: Saturday 16 August 2014 17:17
- Target OS: Linux
- Domoticz version: 3.6304
- Contact:
Re: NEO COOLCAM NAS-RC03Z
I have this remote too.
To add good support we need the zwave device specicifications to create the corresponding xml file for openzwave.
Until now I never found these specicifications.
To add good support we need the zwave device specicifications to create the corresponding xml file for openzwave.
Until now I never found these specicifications.
-
- Posts: 3
- Joined: Saturday 04 November 2017 15:38
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: NEO COOLCAM NAS-RC03Z
For the 1 button version xlm file is available. I'm not expert on this, but probably this isn't enough information?
https://github.com/OpenZWave/open-zwave ... -rc01z.xml
https://github.com/OpenZWave/open-zwave ... -rc01z.xml
-
- Posts: 13
- Joined: Friday 25 January 2019 16:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: NEO COOLCAM NAS-RC03Z
Hi,
I'm looking for remote control like this one. I need three buttons to turn on and off three different sections of lights outside of my house. I'm able to do this using web browser and domoticz, but I need remote device to keep it in my car. I understand that specification of this controller is not available right now, but if I'll create simple events in domoticz for each button - will this work? Do I have to set some hidden parameters of the remote? I assume that domoticz will recognize it as three (or four) separate buttons and the only thing I'll need to do is monitoring status of each button. Am I right? Or if this will be recognized as one device, I assume that I'll be able to determine whitch button has been pressed by value sended to domoticz. What do you think about my idea? I don't have this remote, that's why I assume so many things.
Regards
Irek
I'm looking for remote control like this one. I need three buttons to turn on and off three different sections of lights outside of my house. I'm able to do this using web browser and domoticz, but I need remote device to keep it in my car. I understand that specification of this controller is not available right now, but if I'll create simple events in domoticz for each button - will this work? Do I have to set some hidden parameters of the remote? I assume that domoticz will recognize it as three (or four) separate buttons and the only thing I'll need to do is monitoring status of each button. Am I right? Or if this will be recognized as one device, I assume that I'll be able to determine whitch button has been pressed by value sended to domoticz. What do you think about my idea? I don't have this remote, that's why I assume so many things.
Regards
Irek
Who is online
Users browsing this forum: No registered users and 1 guest