Adding a Aeotec Z-stick Gen 5

[no66]

Hi

been using RFXtrx433 USB for some years with som simple nexa stuff and temp sensors. This is on /dev/ttyUSB0

Trying to add a Aeotec Z-stick Gen 5 to my setup, but what port should it be on? If I add it to /dev/ttyUSB0 I get a conflict with my RFX and those stop working.

I'm pretty rusty atm and can't figue it out.

version: 4.9700

[pvm]

Running on a PI? lsusb will show devices
More info https://www.domoticz.com/wiki/PersistentUSBDevices

[no66]

Yes, PI.

will look at the link you posted. Looks complicated

[no66]

Hmm
can't see the Aeotec

idVendor 0x0658 Sigma Designs, Inc.
idProduct 0x0200
iProduct 0
iSerial 0
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
iProduct 2 RFXtrx433
iSerial 3 A1YVH6TG
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0xec00 SMSC9512/9514 Fast Ethernet Adapter
iProduct 0
iSerial 0
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x9514
iProduct 0
iSerial 0
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
iProduct 2 DWC OTG Controller
iSerial 1 3f980000.usb