Hi,
In have domoticz running on a Pi for some years. Mostly with esp8266 switches and Sensors.
I started with some 433Mz units and the rfxcom transceiver. I bought a starter set von KAKU. (1500R)
Domoticz has found the units. I was able to switch the lights all for just once within Domoticz . After that no response.
In the log in I find: 2017-11-12 10:35:56.009 Error: RFXCOM: Invalid data received!..
What can cause this error?
Kind regards.
Har
KAKU does not work in Domoticz
Moderator: leecollings
-
- Posts: 517
- Joined: Friday 12 July 2013 18:13
- Target OS: -
- Domoticz version:
- Location: Netherlands
- Contact:
Re: KAKU does not work in Domoticz
The remote is received as AC device?
You have a recent firmware in the RFXtrx433E?
You have a recent firmware in the RFXtrx433E?
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
-
- Posts: 18
- Joined: Wednesday 06 January 2016 11:34
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Dalfsen netherlands
- Contact:
Re: KAKU does not work in Domoticz
AC device is correct. Firmware is on latest version.
I change the firmware from ext2 to ext. And now it works. Which is odd ass in both version the AC is part off the firmware
I change the firmware from ext2 to ext. And now it works. Which is odd ass in both version the AC is part off the firmware
-
- Posts: 517
- Joined: Friday 12 July 2013 18:13
- Target OS: -
- Domoticz version:
- Location: Netherlands
- Contact:
Re: KAKU does not work in Domoticz
The code of your KAKU remote is maybe the same as a Kangtai/Cotech packet. If Lighting4 and AC is enabled in Ext2 it will try to decode the packet for this protocol.
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
Who is online
Users browsing this forum: No registered users and 0 guests