Hi!
I'm new at this forum, so i don't know if this is the right section to put this question, so correct me if i'm wrong.
I recently bought the RFXCOM433E transceiver for my windows 7 server with domoticz installed. It works like a charm with the Impuls and Domoticz switches and i recently connected a KaKu doorbell CDB-6500 successfully.
Now i bought the Selectplus 200689103 door chime at 'action' and i want to use the ringer to make a sound (i don't want to use the switch) but i can't get it to connect to domoticz. Does anyone have experience with this?
Thanks in advance!
Selectplus doorchime
Moderator: leecollings
-
- Posts: 20
- Joined: Saturday 02 September 2017 14:32
- Target OS: Linux
- Domoticz version: 3.8153
- Location: Netherlands
- Contact:
Selectplus doorchime
VMWare ESXI, Ubuntu 20.04. Zwave and RFXCom
-
- Posts: 110
- Joined: Sunday 22 March 2015 7:35
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Holland
- Contact:
Re: Selectplus doorchime
Mabye this would help you
viewtopic.php?t=11952
viewtopic.php?t=11952
-
- Posts: 20
- Joined: Saturday 02 September 2017 14:32
- Target OS: Linux
- Domoticz version: 3.8153
- Location: Netherlands
- Contact:
Re: Selectplus doorchime
Hey Mikeoo,
thanks for your reply! i've already read the topic, but it seems that my rfxcom and/or domoticz won't see the devices. So far i had no problem connecting other devices.
thanks for your reply! i've already read the topic, but it seems that my rfxcom and/or domoticz won't see the devices. So far i had no problem connecting other devices.
VMWare ESXI, Ubuntu 20.04. Zwave and RFXCom
-
- Posts: 110
- Joined: Sunday 22 March 2015 7:35
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Holland
- Contact:
Re: Selectplus doorchime
Did you activate the right protocol for the RFXCom (viewtopic.php?t=11952#p87821) .
When the protocol is not activated it would not find the devices for that type.
Read manual because you cant activate all protocols the same time.
Then in setting (Domotics) click on Accept new Hardware Devices (Allow for 5 min)
If that not working connect the RFXcom to your computer and run RFXmngr (Windows program) you can download on http://www.rfxcom.com/WebRoot/StoreNL2/ ... rSetup.exe
Try to play with the settings of RFXmngr to see if you see something when you press the doorbell.
Try to update the RFXCom to te latests firmware also.
If nothings works send an email to RFXCom. They have great support and the can help to see what's wrong.
When the protocol is not activated it would not find the devices for that type.
Read manual because you cant activate all protocols the same time.
Then in setting (Domotics) click on Accept new Hardware Devices (Allow for 5 min)
If that not working connect the RFXcom to your computer and run RFXmngr (Windows program) you can download on http://www.rfxcom.com/WebRoot/StoreNL2/ ... rSetup.exe
Try to play with the settings of RFXmngr to see if you see something when you press the doorbell.
Try to update the RFXCom to te latests firmware also.
If nothings works send an email to RFXCom. They have great support and the can help to see what's wrong.
-
- Posts: 20
- Joined: Saturday 02 September 2017 14:32
- Target OS: Linux
- Domoticz version: 3.8153
- Location: Netherlands
- Contact:
Re: Selectplus doorchime
Thanks for your reply, i'm going to play with the settings. I'll let you know when i've got it to work!
VMWare ESXI, Ubuntu 20.04. Zwave and RFXCom
-
- Posts: 20
- Joined: Saturday 02 September 2017 14:32
- Target OS: Linux
- Domoticz version: 3.8153
- Location: Netherlands
- Contact:
Re: Selectplus doorchime
I've activated the select plus/ByronSX protocol in the RFXManager. I was able to connect the pushbutton, but i still can't connect the chime itself. It does not have a learning function and i can't figure out what to do.
VMWare ESXI, Ubuntu 20.04. Zwave and RFXCom
- Eddiever
- Posts: 105
- Joined: Thursday 27 April 2017 20:32
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.1
- Location: The Netherlands (Hoogeveen)
- Contact:
Re: Selectplus doorchime
It is the pushbutton which works with Domoticz. Not the chime itself. If you have the doorbell in Domoticz and activate that switch, if everything is fine the doorbell will ring.
-
- Posts: 20
- Joined: Saturday 02 September 2017 14:32
- Target OS: Linux
- Domoticz version: 3.8153
- Location: Netherlands
- Contact:
Re: Selectplus doorchime
Hi Eddiever,
I got it now. I've tested it and it works fine! Thank you!
I got it now. I've tested it and it works fine! Thank you!
VMWare ESXI, Ubuntu 20.04. Zwave and RFXCom
Who is online
Users browsing this forum: No registered users and 1 guest