Python Plugin: Samsung TV

[EdwinK]

Thanks. Going to try this.

Code: Select all

root@DiskStation:/volume3/@appstore/domoticz/var/scripts/python# pip3 intall samsungctl
-ash: pip3: command not found

Before that I already did a 'sudo -i' (something that Synology wants instead of just plain sudo'.

[DennisD]

Python 3.x is installed?

[EdwinK]

Python 3.x is installed?

I thought I had. But now it says 2.7.12

But on the Synology paackage screen I get this

Python versions installed

Screen Shot 2017-05-14 at 17.45.20.png (41.87 KiB) Viewed 4826 times

[DennisD]

Not sure then on the Synology, i'm working with a raspberry pi 3 so slightly different

[EdwinK]

Thanks anyway.

[kingoifsnake74]

Anyone? synology python is driving me nuts. 017-05-14 19:32:48.485 Error: (SamsungTV) failed to load 'plugin.py', Python Path used was '/usr/local/domoticz/var/plugins/samsungctl/:/volume1/@appstore/py3k/usr/local/lib/python35.zip:/volume1/@appstore/py3k/usr/local/lib/python3.5/:/volume1/@appstore/py3k/usr/local/lib/python3.5/plat-linux:/volume1/@appstore/py3k/usr/local/lib/python3.5/lib-dynload'.

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed, exception: 'ImportError'

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed: ' Name: samsungctl'

[EdwinK]

Anyone? synology python is driving me nuts. 017-05-14 19:32:48.485 Error: (SamsungTV) failed to load 'plugin.py', Python Path used was '/usr/local/domoticz/var/plugins/samsungctl/:/volume1/@appstore/py3k/usr/local/lib/python35.zip:/volume1/@appstore/py3k/usr/local/lib/python3.5/:/volume1/@appstore/py3k/usr/local/lib/python3.5/plat-linux:/volume1/@appstore/py3k/usr/local/lib/python3.5/lib-dynload'.

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed, exception: 'ImportError'

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed: ' Name: samsungctl'

Got the same settings (minus the python35.zip). Still driving me nuts too. As you see a few posts up, having problems with the 'test' phase. i do have various Python packages, but still it failed. With python --version I get Python 2.7.12 Why has Synology have to make it so difficult to instal this

[kingoifsnake74]

I completely reinstalled everything in my synology. Firtst the python 3.5 module then domoticz. Pip etc. At the end still the same problems. Synology and python is a no go for me. Perhaps i will install domoticz on a rpi this weekeind thanx dor the tips btw.

[EdwinK]

I completely reinstalled everything in my synology. Firtst the python 3.5 module then domoticz. Pip etc. At the end still the same problems. Synology and python is a no go for me. Perhaps i will install domoticz on a rpi this weekeind thanx dor the tips btw.

Just my idea. Now... where did I put that spare RPi

[DennisD]

Keep in mind that the samsungctl doens't work on all types of samsung smart tv's. Mine is a ue55JU7000 and although the plugin, receives the on/off status, i cannot control my tv with it.

[bertbigb]

Hello,

I have a nice Samsung TV and want to control it from Domoticz.
I followed the wiki and have the following problems at this moment:

Code: Select all

bert@DS1515:~$ samsungctl -i --host 192.168.2.15 --method websocket
Traceback (most recent call last):
  File "/bin/samsungctl", line 11, in <module>
    sys.exit(main())
  File "/usr/lib/python2.7/site-packages/samsungctl/__main__.py", line 93, in main
    config = _read_config()
  File "/usr/lib/python2.7/site-packages/samsungctl/__main__.py", line 37, in _read_config
    except FileNotFoundError:
NameError: global name 'FileNotFoundError' is not defined

Anyone an idea what I can / have to do to get this solved? Help is appreciated.

[zak45]

Hello,

I have a nice Samsung TV and want to control it from Domoticz.
I followed the wiki and have the following problems at this moment:

Code: Select all

bert@DS1515:~$ samsungctl -i --host 192.168.2.15 --method websocket
Traceback (most recent call last):
  File "/bin/samsungctl", line 11, in <module>
    sys.exit(main())
  File "/usr/lib/python2.7/site-packages/samsungctl/__main__.py", line 93, in main
    config = _read_config()
  File "/usr/lib/python2.7/site-packages/samsungctl/__main__.py", line 37, in _read_config
    except FileNotFoundError:
NameError: global name 'FileNotFoundError' is not defined

Anyone an idea what I can / have to do to get this solved? Help is appreciated.

/usr/lib/python2.7/site-packages/samsungctl/ --> this show that you have installed on python version 2.7

Plugin system need python 3.x !

[bertbigb]

/usr/lib/python2.7/site-packages/samsungctl/ --> this show that you have installed on python version 2.7

Plugin system need python 3.x !

Hi Zak,
Thanks for your answer. I have a synology and on that one python 2.7 and 3.5 is installed.
Ok, now i know this is the trouble I'm going to switch over too another forum (Synology) to ask there how I can achieve that Synology will run with Python 3.5.

[Drikus]

Anyone? synology python is driving me nuts. 017-05-14 19:32:48.485 Error: (SamsungTV) failed to load 'plugin.py', Python Path used was '/usr/local/domoticz/var/plugins/samsungctl/:/volume1/@appstore/py3k/usr/local/lib/python35.zip:/volume1/@appstore/py3k/usr/local/lib/python3.5/:/volume1/@appstore/py3k/usr/local/lib/python3.5/plat-linux:/volume1/@appstore/py3k/usr/local/lib/python3.5/lib-dynload'.

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed, exception: 'ImportError'

2017-05-14 19:32:48.485 Error: (samsung tv) Module Import failed: ' Name: samsungctl'

Got it work on my Synology. Originally I got the same error, then I had a quick look in the plugin.py:

Code: Select all

if sys.platform.startswith('linux'):
    # linux specific code here
    sys.path.append(os.path.dirname(os.__file__) + '/diste-packages')

change this to:

Code: Select all

if sys.platform.startswith('linux'):
    # linux specific code here
    sys.path.append(os.path.dirname(os.__file__) + '/site-packages')

[zak45]

@Drikus
thanks for this TIP.

if someone else using Synology can confirm.. then will add that to the wiki.

[kingoifsnake74]

Sorry can't confirm stopped with synology, rpi now....

[pablolassalle]

Zak, I could not get the interactive control from the command line to work.
I have a Samsung J model from 2016, and I use this command line to test it:

Code: Select all

sudo samsungctl -i --host 192.168.0.8 --port 8001 --method websocket

but when i use any key, the TV does not respond to any of them.

Do you know what can be the issue?

This is the log from the plugin

2017-08-07 19:44:39.448 User: Admin initiated a switch command (41/Samsung TV - Volume/Set Level)
2017-08-07 19:44:39.456 (Samsung TV) Calling message handler 'onCommand'.
2017-08-07 19:44:39.457 (Samsung TV) onCommand called for Unit 3: Parameter 'Off', Level: 0, Connected: True
2017-08-07 19:44:39.460 Error: (Samsung TV) 'onCommand' failed 'ImportError'.
2017-08-07 19:44:39.460 Error: (Samsung TV) ----> Line 177 in /home/pi/domoticz/plugins/SamsungTV/plugin.py, function onCommand
2017-08-07 19:44:39.460 Error: (Samsung TV) ----> Line 287 in /home/pi/domoticz/plugins/SamsungTV/plugin.py, function SamsungSend
2017-08-07 19:44:39.460 Error: (Samsung TV) ----> Line 10 in /usr/lib/python3.4/samsungctl/remote.py, function __init__
2017-08-07 19:44:39.460 Error: (Samsung TV) ----> Line 13 in /usr/lib/python3.4/samsungctl/remote_websocket.py, function __init__
2017-08-07 19:44:39.511 (Samsung TV) Calling message handler 'onHeartbeat'.
2017-08-07 19:44:39.514 (Samsung TV) isAlive status :True

If someone has an idea of what can be happening, I'll be glad to hear from you.

Thanks

[gijsje]

Did you find a solution for this?
I do have the same problem

[zak45]

Zak, I could not get the interactive control from the command line to work.
I have a Samsung J model from 2016, and I use this command line to test it:

Code: Select all

sudo samsungctl -i --host 192.168.0.8 --port 8001 --method websocket

but when i use any key, the TV does not respond to any of them.

maybe similar:
https://github.com/Ape/samsungctl/issues/22

[zak45]

v2 released. Now with Kodi like remote feature.