Fibaro Double Switch FGS-223 only switches with physical toggle switch

meijerpeter · Post by **meijerpeter** » Wednesday 15 March 2017 9:44

I have several Fibaro z-wave devices around the house in combination with Domoticz on a RPi3. The majority is installed with a momentary switch in combination with a dimmer module.

My issue is that I cannot switch S1 with Domoticz, only with the (single) toggle switch. S2 can be switched with Domoticz, but I have no physical switch attached to Q2/S2. Parameter 20 is on '2', I have also tried '1'.

Does anyone know if I have to set another parameter to enable the switching from within Domoticz??

Many thanks!

pvdhelm · Post by **pvdhelm** » Thursday 16 March 2017 12:18

reboot your domoticz server and it wil work. Had the same issue

meijerpeter · Post by **meijerpeter** » Tuesday 21 March 2017 7:34

Worked! Many thanks!!

FriedlNet · Post by **FriedlNet** » Sunday 09 April 2017 12:33

It works for me very well too. Many thanks!!

berny · Post by **berny** » Sunday 16 April 2017 1:00

I spend hours to resolve this problem after include FGS-223

S1(switch on/off) / Q1(on/off) => OK
S2(switch on/off) / Q2(on/off) => OK
---------------

via domoticz:
S1(domoticz on/off) / Q1(on/off) => NOT OK!!!
S2(domoticz on/off) / Q2(on/off) => OK

when I have read this subject and
I have REBOOT my Raspberry => everything OK!!!
Thanks for this hint.
But why ??

Olfer · Post by **Olfer** » Tuesday 23 May 2017 10:15

Also worked for me! Thanks a lot for this hint!

robpow · Post by **robpow** » Tuesday 14 November 2017 20:02

Can’t believe it was that easy! Had the exact same problem.

Matt

Abelphoenix · Post by **Abelphoenix** » Wednesday 15 November 2017 12:04

I have the same problem Q1 does not change state with domoticz. in windows it does not work restarting the system. Any solution please?

Kazaa2978 · Post by **Kazaa2978** » Wednesday 27 December 2017 22:41

This worked for me also!

Edit ... Below also solved after next reboot next day

Almost......

Now both the Switches work again within Domoticz but still only one will react from my Homekit

In the beginning the S1 did not react by Domoticz and not by the app (S2 works perfectly)
But now S1 works from Domoticz but domoticz still does not react on Homekit(homebridge) push button

I have all the parameters the same between S1 and S2.

Anybody an idea, or how to see if homebridge actualy sends a signal to Domoticz?

chang · Post by **chang** » Saturday 27 January 2018 14:32

Rebooting via shell script worked for me too on Ubuntu.

Abelphoenix · Post by **Abelphoenix** » Monday 05 March 2018 2:50

in windows no found...

Prog · Post by **Prog** » Sunday 26 August 2018 14:20

pvdhelm wrote: ↑Thursday 16 March 2017 12:18 reboot your domoticz server and it wil work. Had the same issue

Sorry to resurrect this thread but I just wanted to thank you. Your post saved me a lot of stress.

JacKok · Post by **JacKok** » Friday 08 February 2019 21:30

Thanks, you save my day!!

Fibaro Double Switch FGS-223 only switches with physical toggle switch

Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Re: Fibaro Double Switch FGS-223 only switches with physical toggle switch

Who is online