Samsung TV control in Domoticz

[mlamie]

I have seen that it is possible to created some switches in Domoticz with multiple buttons like in this topic.
viewtopic.php?t=10177
Like:
TV
Off, Nexus, PS3, etc...

Volume:
Slider

I tried to achieve the same in combination with the Samsung script https://github.com/Tristan79/iSamsungTV
I installed the iSamsungTV script as follows:


I know how to create a dummy switch, but i'm not able to see more text buttons...

I would like to create a switch which can send multiple commands like?
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI1
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI2
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI3
etc..

Or use a volume slider if that is even possible with the commands?
iSamsungTV F 192.168.1.106 -KEY KEY_VOLDOWN
iSamsungTV F 192.168.1.106 -KEY KEY_VOLUP

P.s maybe someone can also help me with the below issue:
Putty (works) with: iSamsungTV F 192.168.1.106 -KEY KEY_MUTE

Domoticz (doesnt work) with:
script://iSamsungTV F 192.168.1.106 -KEY KEY_MUTE
or
script://usr/local/bin/iSamsungTV F 192.168.1.106 -KEY KEY_MUTE

As soon the outcome is clear I will update the Samsung TV wiki page as well. So it will help others as well.
https://www.domoticz.com/wiki/Samsung_TV

[Derik]

try to use 3 x /
So: script:///

[mlamie]

Ha, that did the trick and I did found the right command:

Code: Select all

script:///usr/local/bin/iSamsungTV F 192.168.1.106 -KEY KEY_MUTE

Now some explanation how to create a dummy switch with more buttons as shown in the other topic.

[Derik]

make some new hardware
Dummy with a name you like

Then create a new device in the devices area
use for new device the dummy hardware you make.
Put the script in the on and off section
That's all..

[mlamie]

I have a simple dummy device like a switch (on/off command), what I would like to know is how you create a switches like the below example
This sreenshot is from nayr, not my system


I would like to create a switch which can send multiple commands like?
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI1
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI2
iSamsungTV F 192.168.1.106 -KEY KEY_HDMI3
etc..

Or use a volume slider if that is even possible with the commands?
iSamsungTV F 192.168.1.106 -KEY KEY_VOLDOWN
iSamsungTV F 192.168.1.106 -KEY KEY_VOLUP

Probably some scripting is needed to perform a slider...

P.s. if I add the Panasonic TV hardware is see the following interface, which would be nice if that could be added to Domoticz and works in combination with a Samsung TV.

[perwei]

Just a comment regarding newer Samsung TVs like model K. Seems iSamsungTV isn't working on those models.
On the other hand, Wake-on-LAN does work and brings the TV from sleeping and un-pingable to live and pingable.

Cheers,
Per

[perwei]

There is a wakeonlan command avaliable for Raspbian. Written in Perl.

Code: Select all

sudo apt install wakeonlan

wakeonlan -i 10.0.0.255 e4:7d:bd::96::8e:cd 

where 10.0.0.255 is broadcast address for my local LAN where the Samsung TV is located and e4:7d:bd::96::8e:cd is MAC address for my Samsung TV.

Cheers
Per

[mlamie]

There is a wakeonlan command avaliable for Raspbian. Written in Perl.

Code: Select all

sudo apt install wakeonlan

wakeonlan -i 10.0.0.255 e4:7d:bd::96::8e:cd 

where 10.0.0.255 is broadcast address for my local LAN where the Samsung TV is located and e4:7d:bd::96::8e:cd is MAC address for my Samsung TV.

Cheers
Per

I tried to use the WOL on my Samsung F series, but it didn't work. I probably will take a look at the CEC option.

[mlamie]

I tested every key command of the iSamsungTV script (key commands are not fully in line ). I made the following dummy selector switch

I'm happy with it.

[jumbotroll]

Hi
I have build iSamsungTV for all synology models using DSM 6.x if you guys want to test
Edit: Packages deleted!

[bueno79]

Hi,

just grab the pack for synology ds214Play. it is a D model for the TV. so i have

Code: Select all

script:///usr/local/iSamsungTV/bin/iSamsungTV D 192.168.10.71 -KEY KEY_POWERON

In log I have this :
Error: Error executing script command (/usr/local/iSamsungTV/bin/iSamsungTV). returned: 32256


If I try this in SSH :

Code: Select all

/usr/local/iSamsungTV/bin/iSamsungTV D 192.168.10.71 -KEY KEY_POWERON

I have this error :
-sh: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error

Can you help me ?

[bueno79]

ok I've compile the module. So it should work now. if some one need this module for DS214play, send me a message.

[Rodio]

Hi,

on my 213+ same error as bueno79.
On the prompt:
root@HA:~# /usr/local/iSamsungTV/bin/iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF
-ash: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error.

Regards

edit: DSM 6.1-15047 Update 1
Domoticz V3.6749

[jumbotroll]

Hi,

on my 213+ same error as bueno79.
On the prompt:
root@HA:~# /usr/local/iSamsungTV/bin/iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF
-ash: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error.

Regards

edit: DSM 6.1-15047 Update 1
Domoticz V3.6749

Did you try with sudo ?
/usr/local/iSamsungTV/bin/ sudo iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF

[ptijo]

Hi,
I have the Same probleme :
DS212+ : DSM 6.0.2-8451 Update 7
V3 .6944

script:///usr/local/iSamsungTV/bin/iSamsungTV C xxx.xxx.xxx.xxx -KEY KEY_MUTE
/usr/local/iSamsungTV/bin/iSamsungTV). returned: 32256

thanks

[jumbotroll]

Hi,
I have the Same probleme :
DS212+ : DSM 6.0.2-8451 Update 7
V3 .6944

script:///usr/local/iSamsungTV/bin/iSamsungTV C xxx.xxx.xxx.xxx -KEY KEY_MUTE
/usr/local/iSamsungTV/bin/iSamsungTV). returned: 32256

thanks

Try with ./ if you are in the /usr/local/iSamsungTV/bin/ folder.
Like this: NAS:/usr/local/iSamsungTV/bin$ ./iSamsungTV C 192.168.0.xxx -KEY KEY_MUTE
or
from root:
@DS212+:/$ /usr/local/iSamsungTV/bin/iSamsungTV C 192.168.0.xxx -KEY KEY_MUTE

[Rodio]

Did you try with sudo ?
/usr/local/iSamsungTV/bin/ sudo iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF

root@HA:~# /usr/local/iSamsungTV/bin/sudo iSamsungTV E 192.168.1.36 -KEY KEY_POWEROF
-ash: /usr/local/iSamsungTV/bin/sudo: No such file or directory

Same problem
And I checked, its the right path

[Rodio]

If I use the syntax without the sudo I get this:

root@HA:~# /usr/local/iSamsungTV/bin/iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF
-ash: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error

So if was thinking, is the model (E) the right one? I've got a UE32ES6710

[tontze]

If I use the syntax without the sudo I get this:

root@HA:~# /usr/local/iSamsungTV/bin/iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF
-ash: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error

So if was thinking, is the model (E) the right one? I've got a UE32ES6710

Correct sudo usage :

Code: Select all

sudo /usr/local/iSamsungTV/bin/iSamsungTV E 192.168.1.36 -KEY KEY_POWEROFF

[clubeddie]

Same issue here.

I have a Samsung UE32D6500, installed Jadahls package on a Synology DS213j.

When i start the script in domoticz

Code: Select all

script:///usr/local/iSamsungTV/bin/iSamsungTV D 192.168.2.19 -KEY KEY_POWEROFF

I get:
Error: Error executing script command (/usr/local/iSamsungTV/bin/iSamsungTV). returned: 32256

Tried it in a Terminal, get:
@DiskStation:~$ sudo /usr/local/iSamsungTV/bin/iSamsungTV D 192.168.2.19 -KEY KEY_POWEROFF
/usr/local/iSamsungTV/bin/iSamsungTV: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file

or:
@DiskStation:~$ /usr/local/iSamsungTV/bin/iSamsungTV D 192.168.2.19 -KEY KEY_MUTE/usr/local/iSamsungTV/bin/iSamsungTV D 192.168.2.19 -KEY KEY_MUTE
-sh: /usr/local/iSamsungTV/bin/iSamsungTV: cannot execute binary file: Exec format error

or:
@DiskStation:/usr/local/iSamsungTV/bin$ ./iSamsungTV D 192.168.2.19 -KEY KEY_POWEROFF
-sh: ./iSamsungTV: cannot execute binary file: Exec format error