Not sure where to post...
I have uploaded some custom icons for my custom sensors, they work fine in the web qui.
But in the floorplan I get the domoticz logo for the custom sensors, can I change that somewhere?
Custom Icons for custom sensors in floorplan
Moderators: leecollings, remb0
-
mischa
- Posts: 74
- Joined: Tuesday 07 April 2015 20:32
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8872
- Location: Heerhugowaard, The Netherlands
- Contact:
Custom Icons for custom sensors in floorplan
Pi 2 - Pi 1 - Razzbery 2.0 - Fibaro FGD-211 - Fibaro FGD-212 - Fibaro FGRGBWM-441 (RGBW Module) - Fibaro FGBS321 (Universal Switch) - FGWPF-102 - TBK Home TZ67-G - Synology DS1515+ - Esp Easy (with wemos D1 mini)
-
jeanclic
- Posts: 68
- Joined: Saturday 28 January 2017 11:32
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: France / Burgundy
- Contact:
Re: Custom Icons for custom sensors in floorplan
Hello everybody,
I have the same issue : I use a custom sensor to display weather (Icon changing), but in the floorplan, my icon is simply replaced by a Domoticz logo.
any ideas ?
I have the same issue : I use a custom sensor to display weather (Icon changing), but in the floorplan, my icon is simply replaced by a Domoticz logo.
any ideas ?
RPI3B (Domoticz 4.9700 + ~60 scripts) + RFXtrx433E (fw1020) + Z-Stick Gen5 + MySensors / RPI2B+ (RasPlex)
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
-
qwerk
- Posts: 222
- Joined: Tuesday 22 July 2014 7:21
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Netherlands
- Contact:
Re: Custom Icons for custom sensors in floorplan
Domoticz version: 3.6796
Pi B2
Is this by design or is this a bug?
I have the same issue.
Is there a work around?
I use the floorplan as my main interface.
**** Edit****
I found a workaround on this forum:
viewtopic.php?f=6&t=14435&hilit=floorplan+custom+icons
Pi B2
Is this by design or is this a bug?
I have the same issue.
Is there a work around?
I use the floorplan as my main interface.
**** Edit****
I found a workaround on this forum:
viewtopic.php?f=6&t=14435&hilit=floorplan+custom+icons
Who is online
Users browsing this forum: No registered users and 1 guest