Cheap chinese z-wave products

[star0s]

That's normal, you'll get a Unknown Sigma Designs Unknown: type=0003, id=0001 at OZW. But you'll find devices realated to this one at your Devices tab. You only have to guess which one is the Open/Close state.

In my domoticz : type=0000, id=0000

Which method you used for include ? (double click?)
Which version of domoticz ?
Some changes in manufacturer_specific.xml?

[deennoo]

Xiaomi's one isn't zwave ! But zigbee

Xiaomi doesn't provid any API (except for yeelight), got some Xiaomi product, they only spoke to Xiaomi products.

For zigbee : you need a zigbee dongle, and except for zigbee light (hue, orsam, new ikea bulb) each compagny can't provid is own protocole, without any openning obligation.

That mean that you have to made your own Rflink Zigbee like and hack each compagny protocole (they don't share it because they want to be apple homekit compatible who ask for kind of : your with me, not with other)

[Derik]

there is zwave in the details....

ScreenShot093.jpg (11.01 KiB) Viewed 3325 times

So i try this one... [ perhaps.. ]
When it is not Zwave i get my money back.. ]

Only i do not understand what you are say about the Zigbee....

Domoticz accept a lot of protocols...
Only not zigbee.[ i buy a usb stick that is not the problem ]
I the Zigbee not good/stable enough for Domoticz?

[LouiS22]

That's normal, you'll get a Unknown Sigma Designs Unknown: type=0003, id=0001 at OZW. But you'll find devices realated to this one at your Devices tab. You only have to guess which one is the Open/Close state.

In my domoticz : type=0000, id=0000

Which method you used for include ? (double click?)
Which version of domoticz ?
Some changes in manufacturer_specific.xml?

The inclusion mode is irrelevant, you cab do it by hand or from ozw panel - the result will be the same.

You will never get support for this device. Either Xenon (the manufacturer) used counterfeit z-wave chips for their devices, or they have bad engineers and didn't bother setting a unique id. (I'm guessing the first - they don't have any z-wave alliance certificate). The guys behind openzwave clarified they won't support xenon products, because they don't want to risk a lawsuit by Sigma Designs (the company producing z-wave chipsets).

But the good news is that domoticz recognised your device (at least partly). What you don't and won't get is the parameter fields. As I mentioned before, you can use the sensor, as you should have at least 4 new devices on the not used devices tab. You only have to guess which one is the open/close.

[LouiS22]

there is zwave in the details....
ScreenShot093.jpg
So i try this one... [ perhaps.. ]
When it is not Zwave i get my money back.. ]

Only i do not understand what you are say about the Zigbee....

Domoticz accept a lot of protocols...
Only not zigbee.[ i buy a usb stick that is not the problem ]
I the Zigbee not good/stable enough for Domoticz?

Xiaomi is not into z-wave. You should never trust aliexpress desciptions, or at least do a google or visit the official websitr of the manufacturer. Also, the frequency mentioned on your screenshot is not for EU - but it's irrelevant since Xiaomi is using either zigbee or a propietary format (which is not open sourced).

My advice: save your money and buy something really supported by Domoticz.

[Jelmer]

I've been busy with the 'NEO Coolcam motion sensor' PIR.

I now have a new XML file which can modify all the parameters correctly, there were some mistakes in the current XML file, but also incorrect parameters in the manual of the device itself!

I can confirm now a correct working of this PIR with domoticz. Unfortunately battery level returned seems to be incorrect*

*maybe it's resetted to >100 after factory reset of the PIR?

Anyways, where can I share my XML file and discuss open issues with this Neo coolcam PIR in combination with domoticz?

[LouiS22]

I've been busy with the 'NEO Coolcam motion sensor' PIR.

I now have a new XML file which can modify all the parameters correctly, there were some mistakes in the current XML file, but also incorrect parameters in the manual of the device itself!

I can confirm now a correct working of this PIR with domoticz. Unfortunately battery level returned seems to be incorrect*

*maybe it's resetted to >100 after factory reset of the PIR?

Anyways, where can I share my XML file and discuss open issues with this Neo coolcam PIR in combination with domoticz?

You have merge it into openzwave's github. Make sure to read the howto, though.

[Jelmer]

That makes sense, I'll create a pull request

[Koensk]

Hi all,

Is there somekind of an overview about these sensors.
I mean which sensor where to buy and if it works yes or no.

[LouiS22]

Hi all,

Is there somekind of an overview about these sensors.
I mean which sensor where to buy and if it works yes or no.

There's no such thing, but in brief: Neo Coolcam products are fine, but Xenon's not. You can find more info in this topic on each device, though

[zalsson]

Any recommendation for a fanless mini pc for use with zw090?

Skickat från min A0001 via Tapatalk

[Derik]

https://nl.aliexpress.com/item/New-IOT- ... .23.JebU0q

Perhaps something, for this topic?

[Derik]

Not cheap only nice small:
https://nl.aliexpress.com/item/Free-shi ... 07777421fb

[LouiS22]

https://nl.aliexpress.com/item/New-IOT- ... .23.JebU0q

Perhaps something, for this topic?

Dear Derik,

Please, please read before post. The photo clearly states it's a zigbee device, which is not zwave at all. Also, study the description and visit the manufacturer's website.

Aliexpress' keywords are not the best, also our chinese friends write everything they can think of

[dutchdevil83]

If you want to order z-wave from china wait till friday, prices will drop to 1/3 of the price on shopping festival...

Going to order some motion sensors and wall plugs for 22 euro a piece here: https://nl.aliexpress.com/store/203725

[RayAmsterdam]

If you want to order z-wave from china wait till friday, prices will drop to 1/3 of the price on shopping festival...

Going to order some motion sensors and wall plugs for 22 euro a piece here: https://nl.aliexpress.com/store/203725

Just after they raised the prices by 20-25%.

[dutchdevil83]

If you want to order z-wave from china wait till friday, prices will drop to 1/3 of the price on shopping festival...

Going to order some motion sensors and wall plugs for 22 euro a piece here: https://nl.aliexpress.com/store/203725

Just after they raised the prices by 20-25%.

Thats right (mmm reminds me on dutch mediamarkt "BTW Vrij Weken" ). But still 13 euro cheaper just bought 2 wall plugs a week ago for 34 euro a piece ...

[Derik]

there is zwave in the details....
ScreenShot093.jpg
So i try this one... [ perhaps.. ]
When it is not Zwave i get my money back.. ]

Only i do not understand what you are say about the Zigbee....

Domoticz accept a lot of protocols...
Only not zigbee.[ i buy a usb stick that is not the problem ]
I the Zigbee not good/stable enough for Domoticz?

I hope you do notice that this ain't EU frequence right?

Yeah i know....
Got my money back and support it to the RFlink developer.....
Perhaps....

[Derik]

cannot set my Xiaomi coolcam motion ..
The sensuality level stays on 2..
what i try, i cannot set it on 3 or 4..?

[geezerrr]

cannot set my Xiaomi coolcam motion ..
The sensuality level stays on 2..
what i try, i cannot set it on 3 or 4..?

Hmm... the same for me, I also tried to set 12 and 14 instead of 2 and 4 which the sensor takes.. only not seeing any difference in sensitivity.

For parameter 9. Basic Set Level: (lux) (huidig: 100)
It looks like it doesn't accept any other value than 100.. which is to much for my situations.

Any one else have the same?
If so we can better start a new topic for this..