Strange things with temp. block Topic is solved

[EdwinK]

Re-added my temperature meter again, and hen I just use the block, 557 in this case, I get 3 buttons (temp, humidity and a 3rd one). So I thought I could split them with '557_1','557_2','557_3'). But then the last button isn't showing. See attachment.

The device is a Cresta, TFA TS34C temp/humidity sensor

Screen Shot 2020-06-09 at 13.20.11.png (163.38 KiB) Viewed 1343 times

[Lokonli]

Subdevice 3 is reserved for Barometer. The dewpoint is subdevice 4, so try with '557_4'

[gielie]

I had somewhat the same thing only I use the combine option and now I get the dew point as extra in my block while I only want the temp and moisture percentage in 1 block. Is this still possible in some way?

[Lokonli]

I had somewhat the same thing only I use the combine option and now I get the dew point as extra in my block while I only want the temp and moisture percentage in 1 block. Is this still possible in some way?

Of course
You can use the 'value' parameter.

As an example, if device 16 is your temp device, define your block as follows:

Code: Select all

blocks['16_1'] = {
    value: '<Temp>°C, <Humidity>%',
    unit: '',
}

And add '16_1' to one of your columns.

[EdwinK]

Subdevice 3 is reserved for Barometer. The dewpoint is subdevice 4, so try with '557_4'

Didn't know that. Thought it was just numbering upwards.

[Opus]

For me, only the wind strength and direction are shown. I cannot reach the other parameters with a sub IDX. I also need gust and temperature.
Or I overlook something there?
The given string is: 225.00; SW; 4; 8; 17.6; 17.6 I need the 4th and 5th value.

[Lokonli]

For me, only the wind strength and direction are shown. I cannot reach the other parameters with a sub IDX. I also need gust and temperature.
Or I overlook something there?
The given string is: 225.00; SW; 4; 8; 17.6; 17.6 I need the 4th and 5th value.

It seems that the Dashticz wind block only shows strength and direction, and that this is hard coded. It makes it a bit more difficult to improve.

It would be better to change this into a generic block, like the other Domoticz devices.

I'll add this to the feature request list.

[webrazor]

I also have some strange things only with the temp. block.
After i upgraded to 3.5 some .css settings are not working anymore for the temp. block but still work for other blocks.
For example font size of the value and border margin for other blocks still works but not for temp. block.

[Lokonli]

I also have some strange things only with the temp. block.
After i upgraded to 3.5 some .css settings are not working anymore for the temp. block but still work for other blocks.
For example font size of the value and border margin for other blocks still works but not for temp. block.

Maybe this post contains your answer:
https://www.domoticz.com/forum/viewtopi ... 73#p253673

if not, let me know.