Activating ipcam Hikvision DS-2CD2023G0-I Topic is solved

[mojojojo490]

Hi,

as a started user, i am trying to activate my ipcam.
Aswell on the wiki or the forum, i read that the RTSP is not working, so i need to get the JPEG link.

The settings of my cam are:
IP: 192.168.1.62
Port HTTP: 8080
User: admin
Password: ********
URL: /Streaming/channels/1/picture?snapShotImageType=JPEG

I have the Hikvision-CGI added, because on our forum i read that i needed this also:
Configuration / network / advanced settings / integration protocol
added user: rob
password: ********

I don't see the example of the live feed...
What do i wrong?

[UPDATE 14:04h]
The settings were correct. Only the test function didn't work.
When you click on OK, you will see in the tumbnail that the stream will work!

[fransiefrans]

thank you
this worked for my Hikvision DS-2CD2345FWD-I

[mverduyn]

Hello,
also I would like to activate my ipcam, which is not a Hikvision.
I have Domoticz installed, so will have to add hardware from the dropdown menu, if I understood correctly the procedure
If different, pls refer me to a FAQ otherwise, what is best to choose for an ipcam?
Thanks in advance,
Marcel

[waltervl]

Hello,
also I would like to activate my ipcam, which is not a Hikvision.
I have Domoticz installed, so will have to add hardware from the dropdown menu, if I understood correctly the procedure
If different, pls refer me to a FAQ otherwise, what is best to choose for an ipcam?
Thanks in advance,
Marcel

See page https://www.domoticz.com/wiki/Camera_Setup
In the IPcam section there is also a link to https://www.domoticz.com/wiki/Hardware# ... orkcameras with more examples
Pages are not very recent so if you find new information please let me know.