Hi, Have you configured the z-stick correctly? https://aeotec.freshdesk.com/support/solutions/articles/6000191140-pair-z-stick-gen5-as-secondary-using-domoticz-software- and did the controller transfer on the HCL correctly? I am trying to do it the otherway around: Z-stick as primary controller and ...

I don't think it's possible at this moment, and it would be awesome if that would be possible. However, you would want to do it the other way. All devices in Domoticz with optional LUA scripts and see the devices in HCL also. I am still looking for possible solution also.

Hi, Since the beta V3.9672 the status of the Hue bulbs (as a switch) isn't coming back in domoticz. I installed a new hue bridge on the hardware page and disabled the previous one. Scenes and groups are imported, also the motion sensor, but the bulbs are not imported. Who sees the same? And what to ...

And now also hoping for a non HC2 update possibility

It seems also that Fibaro is working to update firmware without the HC, fingers crossed. Hi RikkieB, where exactly did you get this info from? That would be the long awaited step forward... Have to read it myself to believe it might happen one day. See my post on Page 2. Answer from Fibaro support

Still the issue of not seeing the read-only tags in '3. Additional functions status (READ-ONLY)' It does not appear in the config settings at all, even not in read-only mode (as it should) Available settings: 1 (bit 0) - optional temperature sensor connected and operational 2 (bit 1) - open window ...

This heat controller is starting to frustrate me: For one, the necessity of polling quickly drains the battery. This is especially a problem for the external sensor. But even worse: the valve does not work properly, at least not currently in Domoticz. I've set a default temp of 16 degrees in the ...

Still the issue of not seeing the read-only tags in '3. Additional functions status (READ-ONLY)' It does not appear in the config settings at all, even not in read-only mode (as it should) Available settings: 1 (bit 0) - optional temperature sensor connected and operational 2 (bit 1) - open window ...

Indeed, battery life is decreased considerably with polling enabled. You can setup polling interval on your Aeotec ZW090 Z-Stick Gen5 under hardware. I can imagine that this also works for other controllers. Don’t know if it will effect only sensors which have polling enabled. I am going tot test t ...

Indeed, battery life is decreased considerably with polling enabled. You can setup polling interval on your Aeotec ZW090 Z-Stick Gen5 under hardware. I can imagine that this also works for other controllers. Don’t know if it will effect only sensors which have polling enabled. I am going tot test t ...

What happens when you enable polling?

On another note:

Does anyone see the read-only attributes on the Config page for this device? It is in the fgt001.xml but I don't see it.
Only 1, 2 and 3001

And this is the answer they sent me today:

Hello,

At present this feature is available for Fibaro controllers only, but we are working about release for other controllers as well.
Unfortunately we don’t know any details yet.

Yes, I know. I have external sensor and with polling enabled it reports the temperature nicely.

About firmware updates of Fibaro hardware, how can that be achieved with domoticz?

I had to exclude an include for changes to take effect. Furthermore I don't see the read-only attributes on the config pages --> anyone can?
Other config options are working, will keep on testing

Furthermore I get this error message:

2017-12-17 16:53:17.709 Error, Node029, Cannot find endpoint map to instance for Command Class COMMAND_CLASS_APPLICATION_STATUS endpoint 0

Anyone knows what is going on here?

Try enable polling for the heat controller, it will report temperature at intervals.
Manual refresh in the control panel of your Z-stick, where you can include and exclude devices, last option.

Ok, up till now, after re-linking sensor to the heat controller, no luck. If you manually refresh the status of the heat controller, it does pick up the new value and status, but it should not work like that. Hopefully this can be solved

It seems it should report Temperature to the controller every 2/3 hours of when deviation is 0,5-1 degree from the last report. I don't see it and there are no settings available. I will link the sensor with the heat controller again and see what happens and report back This is from Fibaro forum ...

Hi,

The heat controller doesn't update at all, anybody seen the same?

thx