@pipiche

I got a sonoff dongle plus E stick

G

@pipiche,

thx for the clarifacion.

"If you invert the device and restart , you'll still be able to pair the first one and not the others ? "

this is exactly the case.

Let me think if i can send you two devices, because the are physically installed now. I come back to you
G.

Thanks for your reaction @waltervl No I have one stick, i'm orginaly a domoticz user for a long time so tried to make it working. As I get stuck on this I installed HA on a seperate Rasp, with the zigbee plugin there. I moved my stick to the HA installation and was able to add the 6 eco-dimmers ...

Update;
Not manged to get this done in Domoticz.
Installed home assistant. Worked there without a problem. Pity i couldn't get this working no I have a split of devices in Domticz and HA

F.

Hi, Using Zigbee for domoticz plugin, with an Sonoff USB Dongle plus V2. Installed the first Eco-dim.07 zigbee basic dimmer this works flawless, recognized as Ecodim Zigbee 3.0 When trying to add a second or third, communcication is recognized, but added as non optimized in the device management ...

Although new software versions of RFXcom do have a command to move the curtain to an intermediate position. I've not found a way to directly send this command from domoticz The workaround which I found and which is working now for me, is repeatedly sending the stop signal. return { on = { timer ...

Hi, Seems the same issue as mentioned over here: https://www.domoticz.com/forum/viewtopic.php?f=12&t=30781&p=232766&hilit=wunderground+wind#p232766 and here: https://www.domoticz.com/forum/viewtopic.php?f=6&t=29016&p=221551&hilit=wunderground#p221 hope this can be solved one day. Dude

Hi Luc,

Found the same problem over here. Can you share your Lua script ?

Thx

Gleneroo,

Works, Thx !
used your solution in combination with node-red.

Dude

Hi Gleneroo thx a lot, this seems the way forward!

My french is not that good but i managed to detect the Dahua doorbel on my Pi.
Is it possible to give a bit more detail about the configuration of the first two nodes in node-red ?

Thx in advance

Dude

Hi Baaspi,

Did you find the solution to send the command for the mid position ?

Thx

Dude

Thx Gleneroo,

Until now, I've not found a solution : to Get the doorbell ring signal into domoticz;
So If somebody knows how to get this done, i'll be glad to hear.
Opening the doors works fine.

Gerard

Thx svde, If each sensor has a unique hostname and domoticz device names, then it should work. I'm using different IP addresses instead of hostname, And yes I'm using different device names; Luftdaten PM10 - Carport Luftdaten PM10 - Terras Both devices reports the same sensor value and they report ...

Hi thanks for this super dzEvents script It works for me. I've one additional question; I've not one but two Luftdaten sensors up and running and want to have the info of both sensors in Domoticz. Simple copy and run two scripts next to each other doesn't work. I'm a novice on dzEvents scripts an ...

Got my KLF200 working to control a Velux integra window from Domoticz. 1) upgrade your firmware of the KLF200 (note: your devices are removed !!) 2) Define scene's in the KLF200 which you are going to call in domoticz 3) Install JQ parser on the domoticz raspberry PI cd /tmp wget https://github.com ...

Hi, I'm trying to integrate an IP based Dahua VTO2000 Intercom system with my domoticz system. There are two integration points: Get the doorbel ring signal into domoticz; Open the doors from Domoticz. I managed to open the doors. Using the api on: https://s3.amazonaws.com/amcrest-files/Amcrest+HTTP ...

Hi, Have my lora gw up and running here. Sensors are reporting. Commands can be send via Lora. I assume MQTT connection is the way forward to integrate into Domoticz ? mosquitto_sub -h <Region>.thethings.network -t '+/devices/+/up' -u '<AppID>' -P '<AppKey>' -v This works on my domoticz pi, i get ...

Got a Velux IO Homecontrol window + sunsreen and a KLF200. This KLF200 could switch the window and susnsreen hardwired open or close. This KLF200 could also be used as a software interface. Found some information on openhab forum and found a JS wrapper of the REST API. I was wondering if somebody ...

Instead of Velux, if you have the choice or buying a new one, go for instance to www.fakro.com their products are based on Z-wave. Somfy and Velux IO control are closed systems.

Just installed my RFXcom 433 E and get my somfy sunscreens paired in domoticz. I followed the domoticz wiki for this. Great !!

Question I also have a sun/wind detector from somfy. Are you also able to incorporate this device into Domoticz ? If yes, which type of device should I configure ?

Thx